An AlCoCrFeNi2.1 high-entropy alloy coating with uniform microstructure and high hardness

被引：9

作者：

Zhang, Li ^{[1
]}

Ji, Yan ^{[1
]}

Ye, Qilu ^{[2
]}

Yang, Bin ^{[1
]}

机构：

[1] Univ Sci & Technol Beijing, Collaborat Innovat Ctr Steel Technol, Beijing 100083, Peoples R China

[2] Chaohu Univ, Anhui Engn Res Ctr High Efficiency Intelligent Ph, Hefei 238000, Peoples R China

来源：

MATERIALS LETTERS | 2023年 / 348卷

关键词：

Extreme high-speed laser cladding; High entropy alloy; Coating;

D O I：

10.1016/j.matlet.2023.134636

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Anisotropy in a thicker coating due to different cross-sectional microstructures is usually a major concern when used for an engineering application. Here, we report that extreme high-speed laser cladding (EHLC) can fabricate coating with thickness of dozens and hundreds microns, whose microstructure and hardness are uniform. Due to lower heat input and rapid cooling, the microstructures with same growth direction under the EHLC are confirmed to connect each other. Based on our present investigation, the EHLC technique opens new avenues for fabricating coatings especially for high-entropy alloy coatings in which uniform microstructure and hardness are required.

引用

页数：5

共 50 条

[31] Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy
Ma, S. G.
Zhang, Y.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 532 : 480 - 486
[32] Characterization of as-cast microstructural heterogeneities and damage mechanisms in eutectic AlCoCrFeNi2.1 high entropy alloy
Choudhuri, Deep
Shukla, Shivakant
Jannott, Philip A.
Muskeri, Saideep
Mukherjee, Sundeep
Lloyd, Jeffrey T.
Mishra, Rajiv S.
MATERIALS CHARACTERIZATION, 2019, 158
[33] Microstructure and wear resistance of TiC reinforced AlCoCrFeNi2.1 eutectic high entropy alloy layer fabricated by micro-plasma cladding
Ye, Fuxing
Yang, Yu
Lou, Zhi
Feng, Lingzhi
Guo, Lei
Yu, Jianxing
MATERIALS LETTERS, 2021, 284
[34] Influence of the cooling rate on the solidification path and microstructure of a AlCoCrFeNi2.1 alloy
Fernandes Oliveira, Pedro Henrique
Siqueira Mancilha, Pedro Henrique
Valenzuela Reyes, Rodrigo Andre
de Gouveia, Guilherme Lisboa
Bolfarini, Claudemiro
Spinelli, Jose Eduardo
Coury, Francisco Gil
MATERIALS CHARACTERIZATION, 2023, 203
[35] Microstructure and corrosion resistance of AlCoCrFeNi high-entropy alloy coating on sintered NdFeB magnets prepared by HVOF spraying
Zhang, L. W.
Xu, J. L.
Chen, J.
Huang, J.
Luo, J. M.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2022, 551
[36] Wear Properties of Spark Plasma-Sintered AlCoCrFeNi2.1 Eutectic High Entropy Alloy with NbC Additions
Jiang, Hui
Li, Li
Wang, Jianming
Wei, Chengbin
Zhang, Qiang
Su, Chunjian
Sui, Huaiming
ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2023, 36 (06) : 987 - 998
[37] Synthesis and Characterization of TiB2-Reinforced AlCoCrFeNi2.1 High-Entropy-Alloy Matrix Composite
Han, Xin
Liu, Enshuo
Peng, Chong
Han, Chan
Zhou, Guangtong
Li, Chenjing
Qi, Li
Li, Rui
Ke, Yujiao
METALS, 2024, 14 (12)
[38] Y-doped AlCoCrFeNi2.1 eutectic high-entropy alloy with excellent oxidation resistance and structure stability at 1000°C and 1100°C
Lu, Jie
Zhang, Han
Chen, Ying
Ling, Li
Liu, Xuanzhen
Xiao, Weiwei
Ni, Na
Zhao, Xiaofeng
Guo, Fangwei
Xiao, Ping
CORROSION SCIENCE, 2021, 180
[39] Wear Properties of Spark Plasma-Sintered AlCoCrFeNi2.1 Eutectic High Entropy Alloy with NbC Additions
Hui Jiang
Li Li
Jianming Wang
Chengbin Wei
Qiang Zhang
Chunjian Su
Huaiming Sui
Acta Metallurgica Sinica (English Letters), 2023, 36 : 987 - 998
[40] Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy
Wani, I. S.
Bhattacharjee, T.
Sheikh, S.
Clark, I. T.
Park, M. H.
Okawa, T.
Guo, S.
Bhattacharjee, P. P.
Tsuji, N.
INTERMETALLICS, 2017, 84 : 42 - 51

← 1 2 3 4 5 →