Enhanced strength-ductility balance of the (CoCrFeNiMn)95.2Al3.2Ti1.6 high-entropy alloy by co-precipitation of the B2 and sigma phases

被引：12
|
作者：
Yang, Guanghui [1 ]
Kang, Jiyeon [1 ]
Kim, Jin-Kyung [1 ]
Park, Joo Hyun [1 ]
机构：
[1] Hanyang Univ, Dept Mat Sci & Chem Engn, Ansan 15588, South Korea
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2023年 / 873卷
基金：
新加坡国家研究基金会;
关键词：
High entropy alloy; Co-precipitation; Mechanical properties; Sigma phase; B2; phase; ULTRA-HIGH STRENGTH; MECHANICAL-PROPERTIES; NANOSCALE PARTICLES; STABILITY; PRECIPITATION; STRAIN; NANOCRYSTALLINE; MICROSTRUCTURE; KINETICS; BEHAVIOR;
D O I：
10.1016/j.msea.2023.145039
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The present work investigated the effect of the co-precipitation of the B2 and & sigma; phases on the mechanical properties of the (CoCrFeNiMn)95.2Al3.2Ti1.6 high entropy alloy subjected to two-step annealing. The single-step annealed sample at 900 & DEG;C only showed B2 precipitates. Further annealing at 650 and 750 & DEG;C led to the co precipitation of & sigma; and B2 particles. The sizes and fractions of & sigma; and B2 particles increased with increasing annealing temperature. The sample subjected to the second annealing at 750 & DEG;C, with large sizes and fractions of co-precipitated & sigma; and B2 particles, exhibited high strength with maintaining moderate ductility (YS: 561 MPa, UTS: 1005 MPa, TE: 26%). The superior mechanical properties of the sample subjected to the second annealing at 750 & DEG;C could be owing to the co-precipitation hardening, back stress strengthening, joint activation of dislocation plasticity and deformation twinning. The present work offers a novel microstructure design to optimize the strength-ductility balance of high-entropy alloys via the co-precipitation of & sigma; and B2 particles.
引用
收藏
页数：8
相关论文
共 40 条
  • [11] Enhancing strength-ductility synergy in a casting non-equiatomic NiCoCr-based high-entropy alloy by Al and Ti combination addition
    Huang, Xueling
    Huang, Lanping
    Peng, Hailong
    Liu, Yong
    Liu, Bin
    Li, Song
    SCRIPTA MATERIALIA, 2021, 200
  • [12] Tailoring phase transformation and precipitation features in a Al 21 Co 19.5 Fe 9.5 Ni 50 eutectic high-entropy alloy to achieve different strength-ductility combinations
    Liu, Xudong
    Liu, Haoxiang
    Li, Mingyang
    Xing, Chenxu
    He, Yixuan
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2024, 195 : 111 - 125
  • [13] Obtaining strength-ductility combination in a laser additive manufactured (FeCoNi)86Al7Ti7 high-entropy alloy at cryogenic temperature
    Xie, Kaiqiang
    Fang, Yacheng
    Ma, Pan
    Yang, Hong
    Wan, Shiguang
    Prashanth, Konda Gokuldoss
    Gargarella, Piter
    Mu, Yongkun
    Wang, Gang
    Jia, Yandong
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2025, 34 : 819 - 831
  • [14] Enhancing the strength-ductility synergy of dual-phase Al0.3CoCrFeNiTi0.3 high-entropy alloys through the regulation of B2 phase content
    Luo, Zhengyang
    Liu, Qixuan
    Wei, Junxian
    Huang, Xinyi
    Gao, Ziyao
    Wang, Zihao
    Ma, Xinkai
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 916
  • [15] High Strength-Ductility Synergy of As-Cast B2-Containing AlNbTaTiZr Refractory High-Entropy Alloy Under Intermediate and Dynamic Strain Rates
    Naseer, Hashim
    Wang, Yangwei
    Khan, Muhammad Abubaker
    Brechtl, Jamieson
    Afifi, Mohamed A.
    METALS, 2025, 15 (03)
  • [16] Microstructural evolution and mechanical behavior of novel Ti1.6ZrNbAlx lightweight refractory high-entropy alloys containing BCC/B2 phases
    Wang, Hao
    Chen, Weiping
    Chu, Chenliang
    Fu, Zhiqiang
    Jiang, Zhenfei
    Yang, Xin
    Lavernia, Enrique J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 885
  • [17] Discontinuous precipitation leading to nano-rod intermetallic precipitates in an Al0.2Ti0.3Co1.5CrFeNi1.5 high entropy alloy results in an excellent strength-ductility combination
    Dasari, S.
    Chang, Y-J
    Jagetia, A.
    Soni, V
    Sharma, A.
    Gwalani, B.
    Gorsse, S.
    Yeh, A-C
    Banerjee, R.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 805
  • [18] Enhancing strength-ductility synergy in a casting non-equiatomic NiCoCr-based high-entropy alloy by Al and Ti combination addition (vol 200, 113898, 2021)
    Huang, Xueling
    Huang, Lanping
    Peng, Hailong
    Liu, Yong
    Liu, Bin
    Li, Song
    SCRIPTA MATERIALIA, 2021, 203
  • [19] Enhanced strength-ductility synergy in a brittle CoCrNi2(V3B2Si)0.2 eutectic high-entropy alloy by spheroidized M3B2 and recrystallized FCC
    Zhang, Lingkun
    Amar, Abdukadir
    Zhang, Mengyuan
    Liu, Jinze
    Yan, Hongwei
    Zhang, Yongan
    Lu, Yiping
    SCIENCE CHINA-MATERIALS, 2023, 66 (11) : 4197 - 4206
  • [20] Effect of Sigma and L21 phases co-precipitation on the mechanical properties of CoCr0.6NiV0.6Al0.35Tix high entropy alloy
    Pan, Yinglong
    Li, Bo
    Xu, Yitong
    Wu, Da
    Hou, Xiaohu
    Gao, Yimin
    Bai, Pucun
    Liang, Chenyu
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2025, 923
1234