Dynamic softening kinetics of Al0.3CoCrFeNi high-entropy alloy during high temperature compression and its correlation with the evolving microstructure and micro-texture

被引:11
作者
Patnamsetty, Madan [1 ]
Ghosh, Sumit [2 ]
Somani, Mahesh C. [2 ]
Peura, Pasi [1 ]
机构
[1] Tampere Univ, Mat Sci & Environm Engn, Tampere 33720, Finland
[2] Univ Oulu, Ctr Adv Steels Res, Mat & Mech Engn, Oulu 90014, Finland
关键词
High entropy alloys; Critical stress; strain; Plastic flow; Discontinuous dynamic recrystallization; Avrami equation; HOT DEFORMATION-BEHAVIOR; STACKING-FAULT ENERGY; RECRYSTALLIZATION; STEEL;
D O I
10.1016/j.matchar.2023.112693
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
To establish the characteristics and kinetics of dynamic softening in a Al0.3CoCrFeNi high-entropy alloy (HEA), isothermal compression tests were carried out in a suitable temperature range of 1273-1423 K at 10-2 and 10-1 s-1 in accord with our previous study. It was found that the discontinuous dynamic recrystallization (DRX) was the dominant microstructural reconstitution mechanism. The conditions of critical stress/strain for the onset of dynamic recrystallization were determined using the Poliak-Jonas analytical criterion. Further, a kinetic model was established based on the Avrami-type function in order to be able to predict the volume fraction of DRX. The DRX volume fraction expectedly increased with strain. The microstructural investigation of the isothermally compressed specimens revealed a good agreement with the proposed DRX kinetics model and validated its ac-curacy. Additionally, the evolution of DRX with strain was characterized by interrupting the test carried out at 1323 K/10-1 s-1 at different strains. The progress of DRX evolving as increased formation of new recrystallized grains further corroborated the predictions of the kinetic model. The micro-texture analysis revealed random texture in the recrystallized grains, whereas the unrecrystallized grains had shown their preferred orientation towards the < 101 > fiber texture.
引用
收藏
页数:15
相关论文
共 41 条
[1]   Microstructural development in equiatomic multicomponent alloys [J].
Cantor, B ;
Chang, ITH ;
Knight, P ;
Vincent, AJB .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 :213-218
[2]   Modelling of constitutive relationship, dynamic recrystallization and grain size of 40Cr steel during hot deformation process [J].
Chen, Liang ;
Sun, Weiyan ;
Lin, Jun ;
Zhao, Guoqun ;
Wang, Guangchun .
RESULTS IN PHYSICS, 2019, 12 :784-792
[3]   Recovery of cold-worked Al0.3CoCrFeNi complex concentrated alloy through twinning assisted B2 precipitation [J].
Dasari, S. ;
Sarkar, A. ;
Sharma, A. ;
Gwalani, B. ;
Choudhuri, D. ;
Soni, V. ;
Manda, S. ;
Samajdar, I. ;
Banerjee, R. .
ACTA MATERIALIA, 2021, 202 :448-462
[4]   Hot deformation and recrystallization of austenitic stainless steel: Part I. Dynamic recrystallization [J].
Dehghan-Manshadi, A. ;
Barnett, Mr. ;
Hodgson, P. D. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (06) :1359-1370
[5]   Hot Deformation Behavior and Dynamic Recrystallization of Medium Carbon LZ50 Steel [J].
Du, Shiwen ;
Chen, Shuangmei ;
Song, Jianjun ;
Li, Yongtang .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (03) :1310-1320
[6]   Hot deformation behavior of CoCrFeMnNi FCC high entropy alloy [J].
Eleti, Rajeshwar R. ;
Bhattacharjee, Tilak ;
Zhao, Lijia ;
Bhattacharjee, Pinaki P. ;
Tsuji, Nobuhiro .
MATERIALS CHEMISTRY AND PHYSICS, 2018, 210 :176-186
[7]   Characteristics of dynamic softening during high temperature deformation of CoCrFeMnNi high-entropy alloy and its correlation with the evolving microstructure and micro-texture [J].
Ghosh, Sumit ;
Patnamsetty, Madan ;
Somani, Mahesh C. ;
Peura, Pasi .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 15 :6608-6623
[8]   Hot deformation characteristics and dynamic recrystallization of the MoNbHfZrTi refractory high-entropy alloy [J].
Guo, N. N. ;
Wang, L. ;
Luo, L. S. ;
Li, X. Z. ;
Chen, R. R. ;
Su, Y. Q. ;
Guo, J. J. ;
Fu, H. Z. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 651 :698-707
[9]   Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy [J].
Gwalani, B. ;
Soni, Vishal ;
Lee, Michael ;
Mantri, S. A. ;
Ren, Yang ;
Banerjee, R. .
MATERIALS & DESIGN, 2017, 121 :254-260
[10]   Modifying transformation pathways in high entropy alloys or complex concentrated alloys via thermo-mechanical processing [J].
Gwalani, Bharat ;
Gorsse, Stephane ;
Choudhuri, Deep ;
Styles, Mark ;
Zheng, Yufeng ;
Mishra, Rajiv S. ;
Banerjee, Rajarshi .
ACTA MATERIALIA, 2018, 153 :169-185