STRUCTURE AND PHYSICO-MECHANICAL PROPERTIES OF POLYELECTROLYTE COMPLEXES BASED ON SODIUM CARBOXYMETHYLCELLULOSE POLYSACCHARIDE AND POLYACRYLAMIDE

被引:2
作者
Inagamov, Sabitjan Ya. [1 ]
Asrorov, Ummatjon A. [2 ,3 ]
Xujanov, Erkin B. [3 ]
机构
[1] Tashkent Pharmaceut Inst, Aibekst 45b, Tashkent 100015, Uzbekistan
[2] Natl Univ Uzbekistan, Tashkent, Uzbekistan
[3] Tashkent State Pedag Univ, Tashkent, Uzbekistan
来源
EAST EUROPEAN JOURNAL OF PHYSICS | 2023年 / 04期
关键词
Sodium carboxymethylcellulose; Polyacrylamide; Polycomplex; Interpolymer complex; Films; Structure; Properties; Mechanical strength; Relative elongation; Modulus of elasticity; Electron microscopy; POLY(ACRYLIC ACID); POLY(VINYL METHYL-ETHER); INTERPOLYMER COMPLEXES; POLYMERS; PH; COPOLYMERS; HYDROGELS;
D O I
10.26565/2312-4334-2023-4-32
中图分类号
O4 [物理学];
学科分类号
0702 ;
摘要
In this paper, the structure and physico-mechanical properties of films of polyelectrolyte complexes (PEC) based on sodium carboxymethylcellulose (Na-CMC) with linear polyacrylamide (PAA) have been studied. Polyelectrolyte complexes were obtained by mixing aqueous solutions of Na-CMC and PAA components in various ratios of components and pH of the medium. The structure of the obtained products was determined using IR spectroscopy and electron microscopy. IR spectra in the range 400-4000 cm-1 were recorded on NIKOLET Magna-560 IR and Specord-75IR spectrophotometers (Carl Zeiss, GDR). The mechanical properties of films of polyelectrolyte complexes were determined by stretching at a constant speed of movement of the lower clamp, 50 mm/min, on an Instron-1100 automatic dynamometer (England) at room temperature. IR spectroscopic data showed that polyelectrolyte complexes based on Na-CMC and PAA were stabilized due to the cooperative ionic bond between Na-CMC carboxylate anions (-COO-) and amine groups (-NH2) of polyacrylamide. It is shown that PEC films with an equimolar ratio of Na-CMC and PAA components have an increased value of mechanical strength (sigma p = 38 MPa), elastic modulus (E = 73 MPa) and a minimum relative elongation (epsilon = 0.5%). And in excess of Na-CMC or PAA leads to a decrease in mechanical strength and elastic modulus, which is associated with a decrease in the frequency of intermolecular bonds. It has been ascertained that water-soluble polyelectrolyte complexes based on Na-CMC and PAA with increased strength properties can be obtained from solutions of components taken at an equimolar ratio of interacting components. By changing the ratio of components, properties such as mechanical strength, modulus of elasticity and elongation can be controlled. This can serve as one of the means of controlling the structure and properties of Na-CMC and PAA polyelectrolyte complexes. The regulation of the physico-mechanical properties of PEC films opens up wide opportunities for their use as a soil structure former in agriculture and water management and as the basis for soft drugs in pharmacy.
引用
收藏
页码:258 / 266
页数:9
相关论文
共 50 条
  • [1] STRUCTURE AND PROPERTIES OF INTERPOLYMER COMPLEXES BASED ON SODIUM CARBOXYMETHYLCELLULOSE POLYSACCHARIDE AND CARBOPOL
    Inagamov, Sabitjan Ya
    Eshmatov, Abror
    Pulatova, Feruza A.
    Mukhamedov, Gafur I.
    EAST EUROPEAN JOURNAL OF PHYSICS, 2024, (02): : 416 - 421
  • [2] Structure and Physical-Mechanical Properties of Interpolymeric Complexes Based on Sodium Carboxymethylcellulose
    Inagamov, Sabitjan Ya.
    Mukhamedov, Gafur I.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 122 (03) : 1749 - 1757
  • [3] Modulating the physico-mechanical properties of polyacrylamide/gelatin hydrogels for tissue engineering application
    Arman Jafari
    Shadi Hassanajili
    Farnaz Ghaffari
    Negar Azarpira
    Polymer Bulletin, 2022, 79 : 1821 - 1842
  • [4] Modulating the physico-mechanical properties of polyacrylamide/gelatin hydrogels for tissue engineering application
    Jafari, Arman
    Hassanajili, Shadi
    Ghaffari, Farnaz
    Azarpira, Negar
    POLYMER BULLETIN, 2022, 79 (03) : 1821 - 1842
  • [5] Influence of reactive dyes on the structure and physico-mechanical properties of viscose fibres
    Pavlov, P
    Nedkova, M
    FIBRES & TEXTILES IN EASTERN EUROPE, 2002, 10 (02) : 60 - 64
  • [6] Effect of pH on the physico-mechanical properties of marble
    Singh, T. N.
    Sharma, P. K.
    Khandelwal, Manoj
    BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT, 2007, 66 (01) : 81 - 87
  • [7] Effect of pH on the physico-mechanical properties of marble
    T. N. Singh
    P. K. Sharma
    Manoj Khandelwal
    Bulletin of Engineering Geology and the Environment, 2007, 66 : 81 - 87
  • [8] The mechanical properties of a composite coating with a polymer matrix based on sodium carboxymethylcellulose and aluminum powder
    N. M. Antonova
    Russian Journal of Non-Ferrous Metals, 2009, 50 : 419 - 423
  • [9] The Mechanical Properties of a Composite Coating with a Polymer Matrix Based on Sodium Carboxymethylcellulose and Aluminum Powder
    Antonova, N. M.
    RUSSIAN JOURNAL OF NON-FERROUS METALS, 2009, 50 (04) : 419 - 423
  • [10] Physico-mechanical, morphological and biomedical properties of a novel natural wound dressing material
    Tavaleoli, Javad
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2017, 65 : 373 - 382