Investigation of intake air temperature effect on co-combustion characteristics of NH3/gasoline in naturally aspirated high compression ratio engine with sub-chamber

被引:9
作者
Yilmaz, Emir [1 ]
Ichiyanagi, Mitsuhisa [1 ]
Zheng, Qinyue [2 ]
Guo, Bin [2 ]
Aratake, Narumi [2 ]
Kodaka, Masashi [2 ]
Shiraishi, Hikaru [2 ]
Okada, Takanobu [2 ]
Suzuki, Takashi [1 ]
机构
[1] Sophia Univ, Appl Sci Fac Sci & Technol, Dept Engn, Tokyo 1028554, Japan
[2] Sophia Univ, Grad Sch Sci & Technol, Tokyo 1028554, Japan
基金
日本学术振兴会;
关键词
COMBUSTION; AMMONIA;
D O I
10.1038/s41598-023-38883-3
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
Recently, ammonia (NH3), which has a higher energy density than hydrogen, has gained attention for zero-carbon emission goals in the transportation sector. However, in a conventional internal combustion engine (ICE), NH3 combustion mechanism is still under investigation. In this paper, to further expand the knowledge on the adoption of NH3 in ICEs, authors conducted NH3/gasoline co-combustion experiments in a modified, 17.7:1 compression ratio, naturally aspirated spark-assisted CI engine with sub-chamber. The sub-chamber was chosen in order to enhance the combustion speed of NH3. In addition, the sub-chamber was equipped with glow and spark plugs to overcome the high auto-ignition temperature of NH3. Engine performance and NOX emissions were studied under three different intake air temperatures. During the experiments, NH3 content was increased gradually where the engine was run under lean conditions. Although higher NH3 content was achieved compared to our previous work, increasing the intake air temperature resulted in decreased charging efficiency. In addition, corrosion was found on the piston ring after 120 h of operation, negatively affecting the engine performance. Furthermore, NH3/gasoline co-combustion duration was shortened drastically with the influence of the sub-chamber, where the longest combustion duration under the present conditions was found to be 17 & DEG;CA.
引用
收藏
页数:12
相关论文
共 25 条
[1]  
Bin Guo, 2022, International Journal of Automotive Engineering, V13, P1, DOI 10.20485/jsaeijae.13.1_1
[2]  
Bobi S., 2022, GMSARN INT J, V16, P240
[3]  
Dincer I, 2023, LECT N ENERG, V91, P235, DOI 10.1007/978-3-031-13532-3_4
[4]  
Elbaz A. M., 2022, Fuel Commun, V10, P100053, DOI DOI 10.1016/J.JFUECO.2022.100053
[5]  
Guo B., 2021, AUTOMOT EXP, V4, P161, DOI [10.31603/ae.6132, DOI 10.31603/AE.6132]
[6]  
Hohenberg G., 1979, SAE INT, DOI [10.4271/790825, DOI 10.4271/790825]
[7]   Measurement of Vapor Pressures and Enthalpies of Vaporization of Gasoline and Ethanol Blends and Their Effects on Mixture Preparation in an SI Engine [J].
Kar, Kenneth ;
Last, Tristan ;
Haywood, Clare ;
Raine, Robert .
SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS, 2009, 1 (01) :132-144
[8]   Science and technology of ammonia combustion [J].
Kobayashi, Hideaki ;
Hayakawa, Akihiro ;
Somarathne, K. D. Kunkuma A. ;
Okafor, Ekenechukwu C. .
PROCEEDINGS OF THE COMBUSTION INSTITUTE, 2019, 37 (01) :109-133
[9]   Assessment of the Operation of an SI Engine Fueled with Ammonia [J].
Lanni, Davide ;
Galloni, Enzo ;
Fontana, Gustavo ;
D'Antuono, Gabriele .
ENERGIES, 2022, 15 (22)
[10]   Effect of mixture formation mode on the combustion and emission characteristics in a hydrogen direct-injection engine under different load conditions [J].
Lee, Sanguk ;
Kim, Gyeonggon ;
Bae, Choongsik .
APPLIED THERMAL ENGINEERING, 2022, 209