共 50 条
Multi-hub hydrogen refueling station with on-site and centralized production
被引:19
作者:
Bartolucci, L.
[1
]
Cordiner, S.
[1
]
Mulone, V.
[1
]
Tatangelo, C.
[1
]
Antonelli, M.
[2
]
Romagnuolo, S.
[2
]
机构:
[1] Univ Roma Tor Vergata, Dept Ind Engn, Via Politecn 1, I-00133 Rome, Italy
[2] KT Kinet Technol SpA, Viale Castello Magliana 27, I-00148 Rome, Italy
关键词:
Hydrogen refueling station;
Sustainable mobility;
Steam methane reforming;
Hydrogen;
Electrolyzer;
TECHNOECONOMIC ANALYSIS;
ENERGY-CONSUMPTION;
STORAGE-SYSTEM;
FUEL;
OPTIMIZATION;
ELECTROLYSIS;
PERFORMANCE;
SIMULATION;
OPERATION;
IMPACT;
D O I:
10.1016/j.ijhydene.2023.01.094
中图分类号:
O64 [物理化学(理论化学)、化学物理学];
学科分类号:
070304 ;
081704 ;
摘要:
In recent decades, the consequences of climate changes due to greenhouse gas (GHG) emissions have become ever more impactful, forcing international authorities to find green solutions for sustainable economic development. In this regard, one of the global targets is the reduction of fossil fuels utilization in the transport sector to encourage the diffusion of more environmentally friendly alternatives. Among them, hydrogen is emerging as a viable candidate since it is a potentially emission-free fuel when produced by exploiting renew-able energy sources (RES). Nevertheless, to allow widespread use of this gas in the trans-port sector, several technoeconomic barriers, including production cost, and lack of distribution and storage infrastructure, have to be overcome. Distributed hydrogen pro-duction via renewable energy-powered electrolysis could be an effective solution to reduce cost and lead to economies of scale. In this study a multi-hub configuration with on-site production from PV-powered electrolysis and centralized production from steam methane reforming (SMR) is proposed. In particular, an infrastructure network for a bus refueling station located in Lazio is considered as a case study. First, each hub, composed of PV panels, an electrolyzer, a compression system, high-pressure and low-pressure storages, and hydrogen dispensers with chiller, is modeled in a Matlab/Simulink envi-ronment. Then, a design perturbation analysis is carried out to determine the impact of the configuration on the refueling station performance in terms of carbon emissions levels and the Levelized Cost of hydrogen (LCOH). The results show a significant influence of the station size on the economic performance highlighting significant benefits (reduction up to 40% in the LCOH) for a 80 bus HUB with a saturating trend towards larger sizes. CO2 emissions per unit mass of hydrogen are kept limited for all the stations thanks to the synergistic effects of SMR and Electrolyzer. Interconnecting more than one station each other further benefits can be achieved from the environmental perspective (savings up to 5 tons of CO2 are demonstrated for a typical summer case study).& COPY; 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:20861 / 20874
页数:14
相关论文
共 50 条