Bond behaviour between CFRP, GFRP, and hybrid C-GFRP tubes and seawater sea sand concrete after exposure to elevated temperatures

被引：19

作者：

Abolfazli, Milad ^{[1
]}

Reyes, Rodolfo Ivan John ^{[1
]}

Choong, Dion ^{[1
]}

Bazli, Milad ^{[1
,2
]}

Rajabipour, Ali ^{[1
]}

Pourasiabi, Hamid ^{[2
]}

Arashpour, Mehrdad ^{[3
]}

机构：

[1] Charles Darwin Univ, Fac Sci & Technol, Darwin, Australia

[2] Univ Queensland, Sch Mech & Min Engn, Brisbane, Australia

[3] Monash Univ, Dept Civil Engn, Melbourne, Australia

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2023年 / 392卷

关键词：

Hybrid fibre reinforced polymers; Seawater sea sand concrete; Bond strength; SWSSC filled FRP tubes elevated temperature; Pushout test; MECHANICAL-PROPERTIES; EPOXY; GLASS; DURABILITY; CARBON; TESTS; BARS;

D O I：

10.1016/j.conbuildmat.2023.131884

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The paper provides an overview of the current research on bond performance between fibre-reinforced polymer (FRP) tubes and SWSSC and investigates the bond strength of SWSSC-filled FRP tubes after exposure to different temperatures using push-out tests. A total of 27 samples, including glass FRP (GFRP), carbon FRP (CFRP), and glass-carbon hybrid FRP (HFRP) tubes, were tested to determine the effect of elevated up to 250 degrees C temperatures on the bond performance of the samples. It was observed that exposure to elevated temperatures increased the bond strength of all the tubes. The GFRP and CFRP tubes exhibited the strongest and weakest bond strengths, respectively. Since the inner layer of the HFRP tube was composed of CFRP, the bond strength of HFRP was found to be more similar to that of CFRP samples than GFRP samples. The study concluded that the bond strength of all the samples was predominantly influenced by the surface roughness of the inner tube rather than the fibre type.

引用

页数：11

共 44 条

[31] GFRP bar-reinforced seawater sea-sand concrete beam under the combined influence of seawater exposure and sustained load: Durability and degradation mechanism [J].

Chang, Yufei ;

Wang, Yanlei ;

Li, Bingnan ;

Wang, Mifeng ;

Zhou, Zhi ;

Ou, Jinping .

STRUCTURES, 2022, 43 :1503-1515

[32] Parametric study, finite element analysis, and load capacity calculation for flexural behaviour of seawater and sea sand concrete beams reinforced with GFRP bars [J].

Chen, Zongping ;

Huang, Yuming ;

Zhou, Ji ;

Dai, Shangqin .

STRUCTURES, 2024, 63

[33] Effect of geopolymer recycled brick aggregates concrete cover on enhancing shear and bending properties of CFRP/GFRP/BFRP bars after elevated temperature exposure [J].

Wang, Zike ;

Cheng, Tengyu ;

Zhao, Jun ;

Du, Mingrui ;

Shumuye, Eskinder Desta ;

Yang, Zhaohui .

JOURNAL OF BUILDING ENGINEERING, 2025, 105

[34] Experimental Study on Bond Behavior between CFRP-Steel Composite Bars and Coral Sea-Sand Aggregate Seawater Concrete [J].

Zhou, Ji ;

Chen, Zongping ;

Huang, Yuming .

JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2024, 28 (06)

[35] Durability of GFRP bar-reinforced seawater-sea sand concrete beams: Coupled effects of sustained loading and exposure to a chloride environment [J].

Wang, Zhihao ;

Xie, Jianhe ;

Mai, Zihua ;

Liu, Peng ;

Lu, Zhongyu ;

Li, Lijuan .

ENGINEERING STRUCTURES, 2023, 283

[36] Axial bearing capacity and ductility of seawater sea sand coral aggregate concrete (SSCC) columns reinforced with hybrid GFRP and corrosion resistant rebars [J].

Cao, Qi ;

Li, Xiaowei ;

Wu, Zhimin .

STRUCTURES, 2023, 58

[37] Influence of Elevated Temperatures on the Bond Behaviour of Sand-Coated and Ribbed GFRP Rebars In Concrete - Pull-Out Tests and Calibration of Temperature-Dependent Bond Stress vs. Slip Laws [J].

Rosa, Ines C. ;

Firmo, Joao P. ;

Correia, Joao R. ;

Mazzuca, Pietro .

10TH INTERNATIONAL CONFERENCE ON FRP COMPOSITES IN CIVIL ENGINEERING (CICE 2020/2021), 2022, 198 :774-787

[38] Bond strength between steel reinforcement and RCA concrete during and after exposure to elevated temperatures [J].

Yusuf, M. ;

Sarhat, S. ;

Hajiloo, H. ;

Green, M. F. .

CONSTRUCTION AND BUILDING MATERIALS, 2022, 345

[39] Fatigue bond behaviour between basalt fibre-reinforced polymer bars and seawater sea-sand concrete [J].

Xiong, Zhe ;

Mai, Guanghao ;

Qiao, Sihua ;

He, Shaohua ;

Zhang, Baifa ;

Wang, Hongliang ;

Zhou, Keting ;

Li, Lijuan .

OCEAN & COASTAL MANAGEMENT, 2022, 218

[40] Flexural behaviour of seawater-sea sand concrete beams reinforced with GFRP bars: Effects of the reinforcement ratio, stirrup ratio, shear span ratio and prestress level [J].

Wang, Zhihao ;

Xie, Jianhe ;

Li, Jianglin ;

Liu, Peng ;

Shi, Cuiqing ;

Lu, Zhongyu .

JOURNAL OF BUILDING ENGINEERING, 2022, 54

← 1 2 3 4 5 →