Sustainable charged composites with amphiphobic surfaces for harsh environment-tolerant non-contact mode triboelectric nanogenerators

In this work, the sustainable charged composites with amphiphobic surfaces are reported regarding harsh environment tolerance and robust contactless mode triboelectric nanogenerators (TENGs). SiO2 and polytetrafluoroethylene (PTFE) particles are well dispersed in thermoplastic polyurethane (TPU) and polydimethylsiloxane (PDMS), respectively. Both surfaces become very rough after a chemical etching method and the surface of PTFE-PDMS is fluorinated using a fluorinated alkylsilane, resulted in the formation of amphiphobic surfaces. This significantly enhances the environment tolerance of the contactless mode TENGs as well as the charge retention characteristics of the composites. As a practical non-contact mode application, a speed sensor fabricated using two composites can stably detect a low vehicle speed less than 3.75 km/h when exposed to high humidity (similar to 99%) and various chemical oils. Over 50% of initial output voltage are still generated after 2 weeks with no more decrease after 5 days, showing a 1.4 times slower charge decay rate, compared with the reference Ni-PTFE based TENG.