Multilayer friction surfacing of AA6061 aluminum alloy on 316L steel plate

被引：3

作者：

Li, Hongjun ^{[1
]}

Cao, Bowen ^{[1
]}

Gao, Huangyu ^{[1
]}

Wang, Bingxu ^{[1
]}

Zhou, Jian ^{[1
]}

机构：

[1] Zhejiang Sci Tech Univ, Fac Mech Engn & Automat, Hangzhou, Peoples R China

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS | 2023年 / 237卷 / 04期

关键词：

Friction; surfacing; AA6061; process; parameter; multilayer; surface; roughness; bonding; strength; MECHANICAL-PROPERTIES; COATINGS; MICROSTRUCTURE;

D O I：

10.1177/14644207221121978

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Friction surfacing is a solid-state metal deposition technology, which has potential application in additive manufacturing. In this paper, multilayer of AA6061 deposition was fabricated on 316L steel plate by friction surfacing. The morphology, temperature field, axial force, microstructure, and mechanical properties of the deposition were analyzed. It was found that with the increase of substrate surface roughness, the thickness of deposition increased, the width decreased, and the bonding strength increased. The grain size increased and the hardness decreased from the top layer to the bottom layer of the deposition as a result of reheating by subsequent layer surfacing process. The bonding strength between the substrate and deposition decreased when the number of layers increased.

引用

页码：727 / 736

页数：10

共 27 条

[1]

ASTM International, 2014, E2902014 ASTM INT

[2] Microstructure and mechanical properties of aluminium alloy coatings on alumina applied by friction surfacing [J].

Atil, H. B. ;

Leonhardt, M. ;

Grant, R. J. ;

Barrans, S. .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2021, 235 (02) :366-384

[3] An experimental and theoretical investigation of thermo-mechanical issues in friction surfacing of Al-Mg aluminum alloys: material flow and residual stress [J].

Bararpour, Seyedeh Marjan ;

Aval, Hamed Jamshidi ;

Jamaati, Roohollah .

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2020, 28 (03)

[4] The effect of metal type and multi-layering on friction surfacing [J].

Batchelor, AW ;

Jana, S ;

Koh, CP ;

Tan, CS .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 57 (1-2) :172-181

[5] Structure Investigation of Titanium Metallization Coating Deposited onto AlN Ceramics Substrate by Means of Friction Surfacing Process [J].

Chmielewski, Tomasz ;

Hudycz, Michal ;

Krajewski, Arkadiusz ;

Salacinski, Tadeusz ;

Skowronska, Beata ;

Swiercz, Rafal .

COATINGS, 2019, 9 (12)

[6] Microstructure evolution in aluminum alloy AA 2014 during multi-layer friction deposition [J].

Dilip, J. J. S. ;

Ram, G. D. Janaki .

MATERIALS CHARACTERIZATION, 2013, 86 :146-151

[7] Use of Friction Surfacing for Additive Manufacturing [J].

Dilip, J. J. S. ;

Babu, S. ;

Rajan, S. Varadha ;

Rafi, K. H. ;

Ram, G. D. Janaki ;

Stucker, B. E. .

MATERIALS AND MANUFACTURING PROCESSES, 2013, 28 (02) :189-194

[8] A new additive manufacturing process based on friction deposition [J].

Dilip, J. John Samuel ;

Rafi, H. Kalid ;

Ram, G. D. Janaki .

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2011, 64 (1-2) :27-30

[9]

Galvis JC, 2018, MATER RES-IBERO-AM J, V21, DOI [10.1590/1980-5373-MR-2018-0051, 10.1590/1980-5373-mr-2018-0051]

[10] Wear characterization of functionally graded Al-SiC composite coatings produced by Friction Surfacing [J].

Gandra, J. ;

Vigarinho, P. ;

Pereira, D. ;

Miranda, R. M. ;

Velhinho, A. ;

Vilaca, P. .

MATERIALS & DESIGN, 2013, 52 :373-383

← 1 2 3 →