Synthesis of sodium alginate/phosphorus tetramethylmethyl sulfate biocomposite beads with exceptional adsorption rate for Cr(VI) removal

Sodium alginate/phosphorus tetramethylmethyl sulfate beads (SAB-THPS) with diameters of about 2-5 mm and super-fast adsorption rate for Cr(VI) removal were successfully prepared by impregnation at 25 degrees C to crosslink phosphate groups on the surfaces of sodium alginate beads (SAB) using bis[tetrakis(hydroxymethyl)phospho-nium] (THPS) as the modifier. The static adsorption of SAB-THPS conforms to the pseudo-second order kinetics and Langmuir model on monolayer chemical absorption; its maximum adsorption capacity fitted from Langmuir model is 145.77 mg/g, which is much higher than that of SAB (21.51 mg/g). Especially, SAB-THPS shows ultra-fast adsorption rate below initial Cr(VI) concentrations of 100 mg/L; it achieved removal efficiencies of more than 99.7 % at 2.5, 6.5 and 20 min, respectively with initial Cr(VI) concentrations of 20, 50 and 100 mg/L, respectively.Its adsorption mechanisms include main chemical reduction of Cr(VI) into Cr(III), ions exchange and electrostatic interaction. The environmentally friendly SAB-THPS with the advantages of ultra-fast adsorption rate, high adsorption capacity and easy separation shows good application prospect for rapid remediation of wastewater.