Synthesis of corundum rich coating on 7055 aluminum alloy by micro-arc oxidation and its corrosion resistant property in a saline medium

被引:10
|
作者
Ji, Renlong [1 ]
Liu, Li [2 ]
Yin, Hongxia [1 ]
Li, Weiyun [1 ]
Sun, Jie [1 ]
Zhu, Pengcheng [1 ]
Cao, Chuanbao [3 ]
机构
[1] Yantai Nanshan Univ, Coll Mat Sci & Engn, 12 Daxue Rd, Longkou City 265713, Shandong Provin, Peoples R China
[2] Zhangzhou Inst Technol, Intelligent Mfg Coll, Zhangzhou 363000, Fujian, Peoples R China
[3] Beijing Inst Technol, Res Ctr Mat Sci, 5 South St, Beijing 100081, Peoples R China
关键词
Micro-arc oxidation; alpha-Al2O3; Sodium hexametaphosphate; Sodium tungstate; Corrosion resistance; Wear resistance; PLASMA ELECTROLYTIC OXIDATION; 6061; AL-ALLOY; CERAMIC COATINGS; PHASE-TRANSFORMATION; CURRENT-DENSITY; BEHAVIOR; SURFACE; PEO; MICROSTRUCTURE; OXIDE;
D O I
10.1016/j.surfcoat.2023.130182
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The work researched on Micro-arc oxidation (MAO) coatings fabrication method using 7055 aluminum alloy as substrate. The electrolyte was an alkaline solution added by sodium hexametaphosphate with/without sodium tungstate additive. X-ray diffraction (XRD) characterization proved that the alpha-Al2O3 (corundum)/gamma-Al2O3 (gamma alumina) ratio in the coating reached 0.929 with trace tungsten metal, which was produced by thermit reaction. Scanning electron microscopy (SEM) characterization revealed craters up to 100 mu m in diameter and micro-cracks on the coating surface. Energy dispersive X-ray spectroscopy (EDS) results indicated that the coating surface contains 0.74 at.% Mg, undetectable Zn and Cu, and 1.39 at.% Zr element, which should be 1.04 at.%, 1.51 at.%, 0.43 at.% and 0.02 % theoretically. Zr element distributed spatially in the same region with P element. The corrosion resistant property of the samples was analyzed by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization in 3.5 wt% NaCl. Tafel extrapolation method was utilized to analyze polarization curves and the results revealed that the corrosion potential of the MAO-treated sample was 0.016-0.093 V higher, and the corrosion current density was one order of magnitude lower (1/9.10-1/19.06) than the base 7055 aluminum alloy. The Nyquist diagrams of samples were modeled by equivalent electrical circuits through ZsimpWin software. The iterated data verified a three-layer structure of the MAO coating and the intermediate layer exhibited higher electrical resistance than the barrier layer. The coating film containing the most alpha-Al2O3 phase displayed the largest open porosity (3.99 % by calculation) and the highest electrical resistance. The friction test revealed that the coating fabricated under a higher current density possessed better wear resistance when the outer layer contacted the counterpair of Si3N4 ball.
引用
收藏
页数:19
相关论文
共 50 条
  • [1] Preparation of wear and corrosion resistant micro-arc oxidation coating on 7N01 aluminum alloy
    Zhang, Kai
    Yu, Sirong
    SURFACE & COATINGS TECHNOLOGY, 2020, 388
  • [2] Excellent corrosion resistance of P and Fe modified micro-arc oxidation coating on Al alloy
    Ji, Shunping
    Weng, Yuchang
    Wu, Zhongzhen
    Ma, Zhengyong
    Tian, Xiubo
    Fu, Ricky K. Y.
    Lin, Hai
    Wu, Guosong
    Chu, Paul K.
    Pan, Feng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 710 : 452 - 459
  • [3] Improvement in corrosion resistance of micro-arc oxidation coating on PVD Ti-coated aluminum alloy 7075
    Liu, Naiyu
    Gao, Jianguo
    Tong, Shu
    Xu, Luyao
    Wan, Yong
    Sun, Huilai
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2022, 19 (05) : 2556 - 2565
  • [4] Processing and Analysis of Micro-Arc Oxidation Coating on 319S Aluminum Alloy
    Lv, Pengxiang
    Zhang, Xiaozhou
    Yin, Tingting
    Wang, Zhen
    Dong, Qi
    He, Li
    Zheng, Shuangyang
    COATINGS, 2023, 13 (06)
  • [5] Development of corrosion and wear resistant micro-arc oxidation coating on a magnesium alloy
    Muhaffel, Faiz
    Cimenoglu, Huseyin
    SURFACE & COATINGS TECHNOLOGY, 2019, 357 : 822 - 832
  • [6] Structure and Property of Micro-arc Oxidation Coating Modified by Laser Melting and Solidifying on Aluminum Alloy
    Yu Jie
    Wei Dong-Bo
    Wang Yan
    Lu Peng-Xiang
    Di Shi-Chun
    JOURNAL OF INORGANIC MATERIALS, 2013, 28 (08) : 859 - 863
  • [7] Constitutive relations of micro-arc oxidation coated aluminum alloy
    Dai, Weibing
    Zhang, Ce
    Wang, Ziyi
    Li, Changyou
    Yao, Zhenghong
    Zhang, Yimin
    SURFACE & COATINGS TECHNOLOGY, 2021, 420
  • [8] Effect of Sealing Treatments on the Corrosion Behavior of Micro-arc Oxidation Coating on Aluminum Alloy in Acid NaCl Solution
    Ye Zuo-Yan
    Liu Dao-Xin
    Li Chong-Yang
    Zhang Xiao-Hua
    Zang Xiao-Ming
    Lei Ming-Xia
    JOURNAL OF INORGANIC MATERIALS, 2015, 30 (06) : 627 - 632
  • [9] Binary Additives Enhance Micro Arc Oxidation Coating on 6061Al Alloy with Improved Anti-Corrosion Property
    Zhu, Qingjun
    Zhang, Binbin
    Zhao, Xia
    Wang, Binbin
    COATINGS, 2020, 10 (02)
  • [10] Adhesion and Corrosion Resistance of Micro-Arc Oxidation/Polyurethane Composite Coating on Aluminum Alloy Surface
    Wang, Ruitao
    Xu, Hong
    Yao, Zhongping
    Li, Chunxiang
    Jiang, Zhaohua
    APPLIED SCIENCES-BASEL, 2020, 10 (19):