Development of lubrication film and influence on friction in a total knee replacement during a gait cycle

被引:2
作者
Odehnal, Lukas [1 ]
Ranusa, Matus [1 ]
Wimmer, Markus A. [2 ]
Vrbka, Martin [1 ]
Krupka, Ivan [1 ]
机构
[1] Brno Univ Technol, Fac Mech Engn, Dept Tribol, Tech 2896-2, Brno 61669, Czech Republic
[2] Rush Univ, Coll Med, Med Ctr, Dept Orthoped Surg, Chicago, IL 60612 USA
关键词
Total knee replacement; Friction coefficient; Lubrication film development; Fluorescent microscopy; MOLECULAR-WEIGHT POLYETHYLENE; WEAR; PROTEINS; HIP; COEFFICIENT; ADSORPTION; BEHAVIOR; FLUID;
D O I
10.1016/j.triboint.2022.108073
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The presented study dealt with the experimental analysis of friction and lubrication mechanism observed with fluorescent microscopy in total knee replacement represented by CoCrMo wheel and PMMA plate. Model synovial fluid with marked constituents was used as test lubricant. The experiments investigated three main parameters. Slide-roll-ratio (SRR) showed the greatest influence on lubrication film formation. Friction coefficient was mostly influenced by axial load; its increase led to a decrease in friction. Relative speed was manifested for SRR 1.25 and higher where its increase caused a decrease in friction. The complex experiment showed a development of friction coefficient and lubrication film along the whole gait cycle. The results of this experiment correspond with the initial results concerning the influences of parameters.
引用
收藏
页数:9
相关论文
共 29 条
  • [1] [Anonymous], 2014, ISO 14243 3
  • [2] [Anonymous], 2019, BIOTRIBOLOGY, V17, P1, DOI [10.1016/j.biotri.2019.02.001, DOI 10.1016/J.BIOTRI.2019.02.001]
  • [3] The coefficient of friction of UHMWPE along an entire walking cycle using a ball-on-disc tribometer under arthrokinematics and loading conditions prescribed by ISO 14243-3:2014
    Barceinas-Sanchez, J. D. O.
    Alvarez-Vera, M.
    Montoya-Santiyanes, L. A.
    Dominguez-Lopez, I.
    Garcia-Garcia, A. L.
    [J]. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2017, 65 : 274 - 280
  • [4] Analysis of wear and friction of total knee replacements. Part II: Friction and lubrication as a function of wear
    Flannery, M.
    Jones, E.
    Birkinshaw, C.
    [J]. WEAR, 2008, 265 (7-8) : 1009 - 1016
  • [5] Characteristics of synovial fluid required for optimization of lubrication fluid for biotribological experiments
    Galandakova, Adela
    Ulrichova, Jitka
    Langova, Katerina
    Hanakova, Adela
    Vrbka, Martin
    Hartl, Martin
    Gallo, Jiri
    [J]. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2017, 105 (06) : 1422 - 1431
  • [6] Leiming Gao, 2018, Biosurface and Biotribology, V4, P18, DOI 10.1049/bsbt.2017.0003
  • [7] Towards the understanding of lubrication mechanisms in total knee replacements - Part II: Numerical modeling
    Marian, Max
    Orgeldinger, Christian
    Rothammer, Benedict
    Necas, David
    Vrbka, Martin
    Krupka, Ivan
    Hartl, Martin
    Wimmer, Markus A.
    Tremmel, Stephan
    Wartzack, Sandro
    [J]. TRIBOLOGY INTERNATIONAL, 2021, 156
  • [8] Friction and lubricant film thickness measurements on simulated synovial fluids
    Mavraki, A.
    Cann, P. M.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2009, 223 (J3) : 325 - 335
  • [9] A machine for the preliminary investigation of design features influencing the wear behaviour of knee prostheses
    McGloughlin, TM
    Murphy, DM
    Kavanagh, AG
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2004, 218 (H1) : 51 - 62
  • [10] Meatest, 8435 LEVNY SNIMAC TA