A graphene-based THz selective absorber with absorptivity 95 % and wide-range electrical tunability

被引:2
作者
Samy, Omnia [1 ]
El Moutaouakil, Amine [1 ]
机构
[1] United Arab Emirates Univ, Coll Educ, POB 15551, Al Ain 15551, U Arab Emirates
关键词
THz absorbers; Graphene; Monolayer MoS2; Phosphorene; THz applications; Surface plasmons; Transmission line theory; TRANSMISSION-LINE MODEL; BLACK PHOSPHORUS; MULTIBAND; ANGLE; FIELD;
D O I
10.1016/j.rinp.2024.107490
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A growing adoption of Terahertz (THz) frequency across various applications is witnessed in the recent years. This specific frequency range is said to yield a breakthrough in high-speed electronics and communications, besides its significant role in the medical field regarding scanning and treatment. As frequency absorbers are one of the common blocks in the mentioned applications, they were the focus of many research work. In this paper, we present a theoretical model for a selective THz frequency absorber that has more than 90 % absorptivity and can reach 95 % and near unity absorptivity at some frequencies. The structure is based on monolayers of nanoribbons of graphene, MoS2, and phosphorene. The utilization of the surface plasmon oscillations of these two-dimensional (2D) materials, in addition to the impedance matching, is employed to achieve maximum absorptivity. The structure has an electrically tunable selective frequency from 1.3 THz to 10 THz that nearly covers the whole THz range, and a bandwidth ranging from 0.9 THz to 1.3 THz. Electrical tunability is done through varying the applied voltage on the MoS2/graphene heterostructure (0.2 V similar to 5 V) based on the tunable conductivity of graphene. In addition to the voltage tunability of the design, the absorption frequency is also swept by varying the nanoribbons widths (20 nm similar to 160 nm). The proposed design surpasses previous ones by its simple structure and high absorption through the entire THz range, besides its low cost of fabrication. The structure is ultrathin (similar to 10 nm) that it can fit in ultrathin electronics. It has a relatively small bandwidth compared to previous work, that represents the basis for narrowband absorbers. The structure is simulated using the finite element method (FEM) and verified using the transmission line circuit theory which demonstrated the validity of the structure for higher frequency ranges. The possibility of future synthesis is also discussed.
引用
收藏
页数:11
相关论文
共 69 条
  • [1] A novel analytical method for designing a multi-band, polarization-insensitive and wide angle graphene-based THz absorber
    Arsanjani, Arash
    Biabanifard, Mohammad
    Abrishamian, Mohammad Sadegh
    [J]. SUPERLATTICES AND MICROSTRUCTURES, 2019, 128 : 157 - 169
  • [2] All-graphene perfect broadband THz absorber
    Baah, Marian
    Paddubskaya, Alesia
    Novitsky, Andrey
    Valynets, Nadzeya
    Kumar, Mukesh
    Itkonen, Tommi
    Pekkarinen, Markku
    Soboleva, Ekaterina
    Lahderanta, Erkki
    Kafesaki, Maria
    Svirko, Yuri
    Kuzhir, Polina
    [J]. CARBON, 2021, 185 : 709 - 716
  • [3] Multi-band circuit model of tunable THz absorber based on graphene sheet and ribbons
    Biabanifard, Mohammad
    Abrishamian, Mohammad Sadegh
    [J]. AEU-INTERNATIONAL JOURNAL OF ELECTRONICS AND COMMUNICATIONS, 2018, 95 : 256 - 263
  • [4] Tunable intraband optical conductivity and polarization-dependent epsilon-near-zero behavior in black phosphorus
    Biswas, Souvik
    Whitney, William S.
    Grajower, Meir Y.
    Watanabe, Kenji
    Taniguchi, Takashi
    Bechtel, Hans A.
    Rossman, George R.
    Atwater, Harry A.
    [J]. SCIENCE ADVANCES, 2021, 7 (02)
  • [5] Electric field and strain tunable electronic structures in monolayer Black Phosphorus
    Cao, Tengfei
    Li, Xibo
    Liu, Limin
    Zhao, Jijun
    [J]. COMPUTATIONAL MATERIALS SCIENCE, 2016, 112 : 297 - 303
  • [6] Graphene nanoribbons: fabrication, properties and devices
    Celis, A.
    Nair, M. N.
    Taleb-Ibrahimi, A.
    Conrad, E. H.
    Berger, C.
    de Heer, W. A.
    Tejeda, A.
    [J]. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2016, 49 (14)
  • [7] Section 1Tunable broadband terahertz absorbers based on multiple layers of graphene ribbons
    Chen, Dingbo
    Yang, Junbo
    Zhang, Jingjing
    Huang, Jie
    Zhang, Zhaojian
    [J]. SCIENTIFIC REPORTS, 2017, 7
  • [8] Ultrasensitive terahertz modulation by silicon-grown MoS2 nanosheets
    Chen, Sai
    Fan, Fei
    Miao, Yinping
    He, Xiaotong
    Zhang, Kailiang
    Chang, Shengjiang
    [J]. NANOSCALE, 2016, 8 (08) : 4713 - 4719
  • [9] Terahertz narrowband perfect metasurface absorber based on micro-ring-shaped GaAs array for enhanced refractive index sensing
    Cheng, Yongzhi
    Qian, Yingjie
    Luo, Hui
    Chen, Fu
    Cheng, Zhengze
    [J]. PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES, 2023, 146
  • [10] Terahertz perfect absorber based on InSb metasurface for both temperature and refractive index sensing
    Cheng, Yongzhi
    Li, Zhiren
    Cheng, Zhengze
    [J]. OPTICAL MATERIALS, 2021, 117