Cold Plasma Surface Modification of PLA and LDPE Polymer Plastics

被引：1
|
作者：
Leluk, Karol [1 ]
机构：
[1] Wroclaw Univ Sci & Technol, Fac Environm Engn, Wroclaw, Poland
来源：
ROCZNIK OCHRONA SRODOWISKA | 2023年 / 25卷
关键词：
packaging plastic; plasma modification; wetting; surface properties;
D O I：
10.54740/ros.2023.014
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
Low-density polyethylene (LDPE) and polylactic acid (PLA) plastic films were subjected to modification using different plasma sources. Argon, nitrogen, air and oxygen were used as a gas phase throughout the process, and their impact on the material's surface properties was verified. The surface activation rate was measured via atomic force microscopy regarding the porosity factor and using the water contact angle technique. The last method - being feasible, agile and of high sensitivity to alternating physicochemical surface character - was utilised to verify the post-process stability of the modified surface. Those tests were performed extensively, up to 160 hours (contact angle) and 240 hours (atomic force microscopy).
引用
收藏
页码：141 / 147
页数：7
相关论文
共 50 条
  • [1] Cold plasma treatment: Surface or bulk modification of polymer films?
    PoncinEpaillard, F
    Brosse, JC
    Falher, T
    MACROMOLECULES, 1997, 30 (15) : 4415 - 4420
  • [2] Plasma surface modification of LDPE to improve insulation property
    Chen, M.
    Yu, Q.S.
    Yasuda, H.K.
    IEEE International Conference on Plasma Science, 2000,
  • [3] Surface Modification of Commercially Available PLA Polymer Mesh
    Karthikeyan, Adya
    Girard, Melanie
    Dumont, Marie-Josee
    Chouinard, Gerald
    Tavares, Jason Robert
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2022, 61 (47) : 17297 - 17305
  • [4] PLASMA SURFACE MODIFICATION OF THE INNER SURFACE OF LDPE TUBING FOR BIOMEDICAL APPLICATIONS
    LIN, JC
    COOPER, SL
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1993, 205 : 149 - POLY
  • [5] Surface modification of polymer fibre by the new atmospheric pressure cold plasma jet
    Cheng, Cheng
    Zhang Liye
    Zhan, Ru-Juan
    SURFACE & COATINGS TECHNOLOGY, 2006, 200 (24): : 6659 - 6665
  • [6] Plasma surface modification of polymer materials
    Tyczkowski, J
    PRZEMYSL CHEMICZNY, 2003, 82 (8-9): : 1262 - 1264
  • [7] Plasma polymer films for surface modification
    Biederman, H
    Hlidek, P
    Jezek, J
    Slavinska, D
    Zemek, J
    METAL/NONMETAL MICROSYSTEMS: PHYSICS, TECHNOLOGY, AND APPLICATIONS, 1996, 2780 : 272 - 275
  • [8] Surface Modification of Polymer Powders by a Far Cold Remote Nitrogen Plasma in Fluidized Bed
    Aiche, Lynda
    Vergnes, Hugues
    Despax, Bernard
    Caussat, Brigitte
    Caquineau, Hubert
    INTERFACE CONTROLLED ORGANIC THIN FILMS, 2009, 129 : 79 - 83
  • [9] Cold Plasma for the Modification of the Surface Roughness of Microparticles
    Oguzlu, Hale
    Baldelli, Alberto
    Mohammadi, Xanyar
    Kong, Albert
    Bacca, Mattia
    Pratap-Singh, Anubhav
    ACS OMEGA, 2024, 9 (33): : 35634 - 35644
  • [10] Controlled Surface Wettability by Plasma Polymer Surface Modification
    Iqbal, Muzammil
    Dinh, Duy Khoe
    Abbas, Qasim
    Imran, Muhammad
    Sattar, Harse
    Ul Ahmad, Aqrab
    SURFACES, 2019, 2 (02): : 349 - 371
12345