Effect of pre-aging on microstructure, activation energy, texture evolution of Mg-9Gd-4Y-2Zn-0.5Zr alloy during compression deformation

被引:4
|
作者
Jia, Leichen [1 ]
Zheng, Jie [1 ]
Yan, Zhaoming [1 ]
Liu, Liang [1 ]
Dai, Xueyan [1 ]
Zhang, Zhimin [1 ]
Xue, Yong [1 ]
机构
[1] North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Peoples R China
来源
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | 2023年 / 26卷
基金
中国国家自然科学基金;
关键词
Pre-aged; Dynamic recrystallization behavior; Texture; Mg-Gd-Y-Zn-Zr alloy; HOT DEFORMATION; DYNAMIC RECRYSTALLIZATION; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; MG ALLOY; BEHAVIOR; MAGNESIUM;
D O I
10.1016/j.jmrt.2023.08.201
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper illustrated the effects of pre-aging on the microstructure, texture evolution, and deformation behavior of Mg-9Gd-4Y-2Zn-0.5Zr alloy during hot compression. Dynamic recrystallization (DRX) behavior, texture evolution, stress-strain curve, and activation energy of the solid solution and pre-aged alloy were evaluated. The results showed that the second-phase particles of the pre-aged samples exhibit combination of two types particles structure, which is composed of coarse dynamic precipitation particles and fine nanoparticles. The combination of these two types particles showed the best grain refinement effect by accelerating the DRX process, as the coarse dynamic precipitation particles promoted DRX through the PSN mechanism and the fine granular phase pinned dislocations and inhibited grain growth. As a result, the pre-aged samples had a higher DRX grain volume fractions and smaller average grain sizes than the solid solution alloys. In addition, the pre-aged sample had higher deformation activation energy (Q= 294.8 kJ/mol) than solid solution sample (Q= 223 kJ/ mol) because b-phase pin dislocations formed during deformation restrained the movement of grain boundaries. The pre-aged alloys also showed a more concentrated texture than the solid solution alloys, with the c-axis of the coarse grains distributed from the compression direction (CD) at 30 degrees inclination to the normal direction (ND). The c-axis distribution of the coarse grains was more scattered in the solid solution alloys. A hot processing map was constructed for the pre-aged alloy and used for evaluation. The optimal deformation parameters for the pre-aged Mg-9Gd-4Y-2Zn-0.5Zr alloy were between 0.001 and 0.1 s-1 at 400 degrees C-480 degrees C. These significant observations not only provide theoretical guidance but also practical application for setting plastic forming deformation parameters in industrial production.(c) 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
引用
收藏
页码:4755 / 4769
页数:15
相关论文
共 50 条
  • [41] Hot deformation and processing map of as-homogenized Mg-9Gd-3Y-2Zn-0.5Zr alloy
    Shao, Zhiwen
    Zhu, Xiurong
    Wang, Rong
    Wang, Jun
    Xu, Yongdong
    Zhao, Baorong
    Ling, Guoping
    MATERIALS & DESIGN, 2013, 51 : 826 - 832
  • [42] Deformation Mechanisms and Evolution of Second Phase Particles of Mg-Y-Nd-Gd-Zr Alloy During Plane Strain Compression
    Fatemi, S. M.
    Moradipour, Y.
    Hajian, M.
    METALS AND MATERIALS INTERNATIONAL, 2021, 27 (11) : 4717 - 4729
  • [43] Effect of cooling rate on the microstructure evolution and mechanical properties of homogenized Mg-Gd-Y-Zn-Zr alloy
    Xu, C.
    Zheng, M. Y.
    Wu, K.
    Wang, E. D.
    Fan, G. H.
    Xu, S. W.
    Kamado, S.
    Liu, X. D.
    Wang, G. J.
    Lv, X. Y.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 559 : 364 - 370
  • [44] Heterogeneous bimodal microstructure and its formation mechanism of Mg-Gd-Y-Zn-Zr alloy during isothermal compression
    Li, Ming
    Wang, Xu
    Liu, Yu
    Xiao, Zhengbing
    Huang, Yuanchun
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 947
  • [45] Microstructure and Texture Evolution of Mg-Gd-Y-Zr Alloy during Reciprocating Upsetting-Extrusion
    Wu, Guoqin
    Yu, Jianmin
    Jia, Leichen
    Xu, Wenlong
    Dong, Beibei
    Zhang, Zhimin
    Hao, Biying
    MATERIALS, 2020, 13 (21) : 1 - 14
  • [46] Microstructure, deformation and fracture mechanism of Mg-Gd-Y-Zn-Zr alloy with different rolling routes during tension
    Han, Yuxiang
    Chen, Zhiyong
    Jiang, Yuxuan
    Jiang, Shunong
    Gao, Yonghao
    Wan, Yingchun
    Liu, Chuming
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 915
  • [47] Effects of dynamic recrystallization mechanisms on texture evolution in Mg-Gd-Y-Zr-Ag alloy during hot compression
    Zhang, Dongdong
    Liu, Chuming
    Jiang, Shunong
    Gao, Yonghao
    Wan, Yingchun
    Chen, Zhiyong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 944
  • [48] Effect of Al addition on microstructure, texture and mechanical properties of Mg-5Gd-2.5Y-2Zn alloy
    Fang, Canfeng
    Liu, Guangxu
    Hao, Hai
    Wen, Zhiheng
    Zhang, Xingguo
    JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 686 : 347 - 355
  • [49] Effect of heat treatment on mechanical properties and microstructure evolution of Mg-9.5Gd-4Y-2.2Zn-0.5Zr alloy
    Zheng, Jie
    Yan, Zhaoming
    Ji, Jinsheng
    Shi, Yusha
    Zhang, Heng
    Zhang, Zhimin
    Xue, Yong
    JOURNAL OF MAGNESIUM AND ALLOYS, 2022, 10 (04) : 1124 - 1132
  • [50] Deformation behavior, microstructure evolution and hot workability of Mg-3.7Gd-2.9Y-0.7Zn-0.7Zr alloy
    Jin, Xueze
    Xu, Wenchen
    Shan, Debin
    Liu, Chang
    Zhang, Qi
    METALS AND MATERIALS INTERNATIONAL, 2017, 23 (03) : 434 - 443