Effect of pre-aging on microstructure, activation energy, texture evolution of Mg-9Gd-4Y-2Zn-0.5Zr alloy during compression deformation

被引:4
|
作者
Jia, Leichen [1 ]
Zheng, Jie [1 ]
Yan, Zhaoming [1 ]
Liu, Liang [1 ]
Dai, Xueyan [1 ]
Zhang, Zhimin [1 ]
Xue, Yong [1 ]
机构
[1] North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Peoples R China
来源
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | 2023年 / 26卷
基金
中国国家自然科学基金;
关键词
Pre-aged; Dynamic recrystallization behavior; Texture; Mg-Gd-Y-Zn-Zr alloy; HOT DEFORMATION; DYNAMIC RECRYSTALLIZATION; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; MG ALLOY; BEHAVIOR; MAGNESIUM;
D O I
10.1016/j.jmrt.2023.08.201
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper illustrated the effects of pre-aging on the microstructure, texture evolution, and deformation behavior of Mg-9Gd-4Y-2Zn-0.5Zr alloy during hot compression. Dynamic recrystallization (DRX) behavior, texture evolution, stress-strain curve, and activation energy of the solid solution and pre-aged alloy were evaluated. The results showed that the second-phase particles of the pre-aged samples exhibit combination of two types particles structure, which is composed of coarse dynamic precipitation particles and fine nanoparticles. The combination of these two types particles showed the best grain refinement effect by accelerating the DRX process, as the coarse dynamic precipitation particles promoted DRX through the PSN mechanism and the fine granular phase pinned dislocations and inhibited grain growth. As a result, the pre-aged samples had a higher DRX grain volume fractions and smaller average grain sizes than the solid solution alloys. In addition, the pre-aged sample had higher deformation activation energy (Q= 294.8 kJ/mol) than solid solution sample (Q= 223 kJ/ mol) because b-phase pin dislocations formed during deformation restrained the movement of grain boundaries. The pre-aged alloys also showed a more concentrated texture than the solid solution alloys, with the c-axis of the coarse grains distributed from the compression direction (CD) at 30 degrees inclination to the normal direction (ND). The c-axis distribution of the coarse grains was more scattered in the solid solution alloys. A hot processing map was constructed for the pre-aged alloy and used for evaluation. The optimal deformation parameters for the pre-aged Mg-9Gd-4Y-2Zn-0.5Zr alloy were between 0.001 and 0.1 s-1 at 400 degrees C-480 degrees C. These significant observations not only provide theoretical guidance but also practical application for setting plastic forming deformation parameters in industrial production.(c) 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
引用
收藏
页码:4755 / 4769
页数:15
相关论文
共 50 条
  • [21] Effects of Microstructure and Texture Evolution on Strength Improvement of an Extruded Mg-10Gd-2Y-0.5Zn-0.3Zr Alloy
    Xue, Zhiyong
    Han, Xiuzhu
    Zhou, Zhiyong
    Wang, Yanlin
    Li, Xuesong
    Wu, Jiapeng
    METALS, 2018, 8 (12):
  • [22] Microstructure evolution and strengthening mechanisms of Mg-6Gd-4Y-0.5Zn-0.5Zr alloy during hot spinning and aging treatment
    Jin, Xueze
    Xu, Wenchen
    Yang, Guojing
    Shan, Debin
    Guo, Bin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 827
  • [23] Microstructure Evolution of Mg-Gd-Y-Zn-Zr Magnesium Alloy During Partial Remelting
    Tao, Jianquan
    Ji, Xinghua
    Zhang, Yanping
    Sun, Changjian
    Deng, Tianquan
    MATERIALS SCIENCE-MEDZIAGOTYRA, 2014, 20 (04): : 436 - 439
  • [24] Microstructure evolution and texture tailoring during hot compression at low temperatures of an extruded dilute Mg-0.5Sn-0.5Zn-0.5Al alloy
    Cheng, Wei-li
    Hao, Mei-juan
    Wang, Li-fei
    Yu, Hui
    Wang, Hong-xia
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 789 (789):
  • [25] Effect of annealing on microstructure and tensile properties of as-extruded Mg-5Gd-4Y-0.5Zn-0.5Zr alloy
    Wu, Xuan
    Wang, Yong
    Chen, Yi
    Qiao, Liying
    She, Jia
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 21 : 929 - 942
  • [26] Evolution of the Microstructure and Mechanical Properties of Mg-10Gd-2Y-0.5Zn-0.3Zr Alloy during Extrusion and Aging Processes
    Xiuzhu Han
    Jie Chang
    Bin Ma
    Zhiyong Zhou
    Wenchen Xu
    Gaolong Zhang
    Journal of Materials Engineering and Performance, 2022, 31 : 7539 - 7549
  • [27] A novel severe plastic deformation method and its effect on microstructure, texture and mechanical properties of Mg-Gd-Y-Zn-Zr alloy
    Yan, Zhaoming
    Zhang, Zhimin
    Li, Xubin
    Xu, Jian
    Wang, Qiang
    Zhang, Guanshi
    Zheng, Jie
    Fan, Hongzhi
    Xu, Kaihua
    Zhu, Jiaxuan
    Xue, Yong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 822
  • [28] Effects of pre-aging on microstructure evolution and deformation mechanisms of hot extruded Mg-6Zn-1Gd-1Er Mg alloys
    Kang, Wei
    Lu, Liwei
    Feng, Longbiao
    Lu, Fengchi
    Gan, Chunlei
    Li, Xiaohui
    JOURNAL OF MAGNESIUM AND ALLOYS, 2023, 11 (01) : 317 - 328
  • [29] EFFECTS OF CYCLIC EXPANSION-EXTRUSION WITH AN ASYMMETRICAL EXTRUSION CAVITY (CEE-AEC) ON THE MICROSTRUCTURE AND TEXTURE EVOLUTION OF Mg-13Gd-4Y-2Zn-0.5Zr ALLOYS
    Fan, Hongzhi
    Yan, Zhaoming
    Zhang, Zhimin
    Wang, Qiang
    Xu, Jian
    Xue, Yong
    MATERIALI IN TEHNOLOGIJE, 2020, 54 (04): : 495 - 501
  • [30] Effect of rotating shear extrusion on the microstructure, texture evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy
    Yan, Lin
    Zhang, Zhimin
    Xue, Yong
    Xu, Jian
    Dong, Beibei
    Li, Xubin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 906