Effect of pre-aging on microstructure, activation energy, texture evolution of Mg-9Gd-4Y-2Zn-0.5Zr alloy during compression deformation

被引:4
|
作者
Jia, Leichen [1 ]
Zheng, Jie [1 ]
Yan, Zhaoming [1 ]
Liu, Liang [1 ]
Dai, Xueyan [1 ]
Zhang, Zhimin [1 ]
Xue, Yong [1 ]
机构
[1] North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Peoples R China
来源
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | 2023年 / 26卷
基金
中国国家自然科学基金;
关键词
Pre-aged; Dynamic recrystallization behavior; Texture; Mg-Gd-Y-Zn-Zr alloy; HOT DEFORMATION; DYNAMIC RECRYSTALLIZATION; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; MG ALLOY; BEHAVIOR; MAGNESIUM;
D O I
10.1016/j.jmrt.2023.08.201
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper illustrated the effects of pre-aging on the microstructure, texture evolution, and deformation behavior of Mg-9Gd-4Y-2Zn-0.5Zr alloy during hot compression. Dynamic recrystallization (DRX) behavior, texture evolution, stress-strain curve, and activation energy of the solid solution and pre-aged alloy were evaluated. The results showed that the second-phase particles of the pre-aged samples exhibit combination of two types particles structure, which is composed of coarse dynamic precipitation particles and fine nanoparticles. The combination of these two types particles showed the best grain refinement effect by accelerating the DRX process, as the coarse dynamic precipitation particles promoted DRX through the PSN mechanism and the fine granular phase pinned dislocations and inhibited grain growth. As a result, the pre-aged samples had a higher DRX grain volume fractions and smaller average grain sizes than the solid solution alloys. In addition, the pre-aged sample had higher deformation activation energy (Q= 294.8 kJ/mol) than solid solution sample (Q= 223 kJ/ mol) because b-phase pin dislocations formed during deformation restrained the movement of grain boundaries. The pre-aged alloys also showed a more concentrated texture than the solid solution alloys, with the c-axis of the coarse grains distributed from the compression direction (CD) at 30 degrees inclination to the normal direction (ND). The c-axis distribution of the coarse grains was more scattered in the solid solution alloys. A hot processing map was constructed for the pre-aged alloy and used for evaluation. The optimal deformation parameters for the pre-aged Mg-9Gd-4Y-2Zn-0.5Zr alloy were between 0.001 and 0.1 s-1 at 400 degrees C-480 degrees C. These significant observations not only provide theoretical guidance but also practical application for setting plastic forming deformation parameters in industrial production.(c) 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
引用
收藏
页码:4755 / 4769
页数:15
相关论文
共 50 条
  • [11] The abnormal flow behavior of Mg-9Gd-4Y-2Zn-0.5Zr alloy during hot tensile deformation at high temperature and low strain rate
    Meng, Mu
    Wang, Xiaoying
    Zhang, Jinbiao
    Chen, Xingxing
    Lei, Genxing
    Yan, Zhaoming
    Zhang, Zhimin
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2025, 34 : 259 - 272
  • [12] Effect of Zn/(Gd plus Y) ratio on the microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy
    Wei, Xiaoxiao
    Jin, Li
    Dong, Shuai
    Wang, Fenghua
    Dong, Jie
    MATERIALS CHARACTERIZATION, 2020, 169 (169)
  • [13] Low-cycle fatigue behaviour of Mg-9Gd-4Y-2Zn-0.5Zr alloys with different structures
    Ji, Jinsheng
    Zheng, Jie
    Jia, Leichen
    Zhang, Yong
    Jia, Yunfei
    Shi, Yusha
    Zhang, Heng
    Xue, Yong
    JOURNAL OF MAGNESIUM AND ALLOYS, 2023, 11 (09) : 3382 - 3393
  • [14] Microstructure, texture and mechanical properties of Mg-8Gd-4Y-1Nd-0.5Zr alloy prepared by pre-deformation annealing, hot compression and ageing
    Wu, Yi-ping
    Xiong, Han-qing
    Jia, Yu-zhen
    Xie, Shao-hui
    Li, Guo-feng
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2019, 29 (05) : 976 - 983
  • [15] Microstructure evolution of Mg-11Gd-4.5Y-1Nd-1.5Zn-0.5Zr (wt%) alloy during deformation and its effect on strengthening
    Yu, Zijian
    Huang, Yuanding
    Gan, Weimin
    Mendis, Chamini Lakshi
    Zhong, Zhengye
    Brokmeier, Heinz Guenter
    Hort, Norbert
    Meng, Jian
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 657 : 259 - 268
  • [16] Effect of Sn addition on the deformation behavior and microstructural evolution of Mg-Gd-Y-Zr alloy during hot compression
    Zhang, Qian
    Li, Quanan
    Chen, Xiaoya
    Bao, Jian
    Chen, Ziyi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 826
  • [17] Evolution of the Microstructure and Mechanical Properties of Mg-10Gd-2Y-0.5Zn-0.3Zr Alloy during Extrusion and Aging Processes
    Han, Xiuzhu
    Chang, Jie
    Ma, Bin
    Zhou, Zhiyong
    Xu, Wenchen
    Zhang, Gaolong
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (09) : 7539 - 7549
  • [18] Effect of Hydrostatic Pressure on LPSO Kinking and Microstructure Evolution of Mg-11Gd-4Y-2Zn-0.5Zr Alloy
    Zheng, Ce
    Chen, Shuai-Feng
    Wang, Rui-Xue
    Zhang, Shi-Hong
    Cheng, Ming
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2021, 34 (02) : 248 - 264
  • [19] Effect of circumferential strain rate on dynamic recrystallization and texture of Mg-13Gd-4Y-2Zn-0.5Zr alloy during rotary backward extrusion
    Meng, Yingze
    Yu, Jianmin
    Zhang, Guanshi
    Wu, Yaojin
    Zhang, Zhimin
    Shi, Zheng
    JOURNAL OF MAGNESIUM AND ALLOYS, 2020, 8 (04) : 1228 - 1237
  • [20] Deformation behavior and microstructure of Mg-13Gd-4Y-2Zn-0.5Zr alloy during the rotating forward extrusion process
    Duan, Yali
    Yu, Jianmin
    Zhang, Baohong
    Dong, Beibei
    Zhang, Zhimin
    Wu, Guoqin
    Wei, Zeng
    Li, Xubin
    Meng, Mu
    MATERIALS LETTERS, 2022, 319