Effect of Al2O3/SiO2 ratio on morphology of complex calcium ferrite

被引：5

作者：

Yang, Dai-wei ^{[1
]}

Wang, Wei ^{[2
]}

Li, Jing-xuan ^{[3
]}

Chen, Xu-heng ^{[2
]}

Chen, Peng-fei ^{[1
]}

机构：

[1] Jiangsu Yonggang Grp Co Ltd, Ironworks, Suzhou 215600, Jiangsu, Peoples R China

[2] Wuhan Univ Sci & Technol, Hubei Prov Engn Technol Res Ctr Met Secondary Reso, Wuhan 430081, Hubei, Peoples R China

[3] Beijing Zhiye Interconnect Technol Co Ltd, Beijing 100144, Peoples R China

来源：

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL | 2023年 / 30卷 / 10期

基金：

中国国家自然科学基金;

关键词：

Complex calcium ferrite; Silico-ferrite of calcium and aluminum; Al2O???????(3)/SiO2 ratio???????( ); Morphology; First-principles calculation; SILICO-FERRITE; SOLID-SOLUTION; ALUMINUM; SINTER; SIO2; REDUCTION; HEMATITE;

D O I：

10.1007/s42243-022-00903-3

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Al2O3 and SiO2 greatly influence the formation of complex calcium ferrite, which is the main bonding phase in high basicity sinters. The effects of Al2O3/SiO2 ratios on the morphology of complex calcium ferrite were studied. The main mineral phases in the samples with different Al2O3/SiO2 ratios were CaFe2O4 with a solid solution of Si or Al atoms and the silico-ferrite of calcium and aluminum. The results showed that the morphology of the complex calcium ferrite changed from lumpy to plate-like and acicular with increases in the SiO2 content and the Al2O3/SiO2 ratio. When the content of SiO2 was 4 wt.%, the main calcium ferrite morphology was acicular, and the number of macropores in the samples increased with the Al2O3/SiO2 ratio increasing. The first-principles analysis of the calcium ferrite crystal structure showed that adding SiO2 and Al2O3 changed the growth mechanism of the CaFe2O4 crystal, promoting the formation of platy and acicular complex calcium ferrite. The size of calcium ferrite was significantly smaller due to the increase in CaO-Fe2O3-SiO2-Al2O3 viscosity with increasing the Al2O3/SiO2 ratio.

引用

页码：1921 / 1928

页数：8

共 25 条

[11] Stability of silico-ferrite of calcium and aluminum (SFCA) in air-solid solution limits between 1240 °C and 1390 °C and phase relationships within the Fe2O3-CaO-Al2O3-SiO2 (FCAS) system
Patrick, TRC
Pownceby, MI
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2002, 33 (01): : 79 - 89
[12] Pownceby M.I., 2003, Mineral Processing and Extractive Metallurgy, V112, P44, DOI [10.1179/03719550371955032250114, DOI 10.1179/03719550371955032250114]
[13] Reaction sequences in the formation of silico-ferrites of calcium and aluminum in iron ore sinter
Scarlett, NVY
Pownceby, MI
Madsen, IC
Christensen, AN
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2004, 35 (05): : 929 - 936
[14] SHIGAKI I, 1986, T IRON STEEL I JPN, V26, P503
[15] Thermodynamic study of evolution of sinter phases at different alumina level
Sinha, M.
Nistala, S. H.
Chandra, S.
Mankhand, T. R.
[J]. IRONMAKING & STEELMAKING, 2017, 44 (02) : 92 - 99
[16] Wang S. T., 1992, IRON STEEL, V27, P7
[17] Effect of SiO2 on the Formation of Acicular Calcium Ferrite in Sinter
Wang, Wei
Yang, Daiwei
Ou-Yang, Zelin
Xu, Runsheng
Song, Mingming
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2019, 50 (02): : 678 - 687
[18] Three-dimensional structure and micro-mechanical properties of iron ore sinter
Wang, Wei
Deng, Ming
Xu, Run-sheng
Xu, Wei-bo
Ouyang, Ze-lin
Huang, Xiao-bo
Xue, Zheng-liang
[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2017, 24 (10) : 998 - 1006
[19] Influencing Factors and Effects of Assimilation Characteristic of Iron Ores in Sintering Process
Wu, Shengli
Zhang, Guoliang
Chen, Shaoguo
Su, Bo
[J]. ISIJ INTERNATIONAL, 2014, 54 (03) : 582 - 588
[20] Xue M., 2008, P 2008 NAT MET PHYS, P205

← 1 2 3 →