Microstructure and Properties of Fe-12Cr-2.5W-xSi-0.4Ti-0.3Y2O3 Alloys

被引：0
|
作者：
Sun, Kui [1 ]
Yao, Zhenhua [1 ]
Wang, Chaofeng [1 ]
Du, Xueming [1 ]
机构：
[1] Wuhan Univ Technol, Sch Mat Sci & Engineer, Wuhan 430070, Peoples R China
来源：
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION | 2023年 / 38卷 / 04期
关键词：
sintering temperature; Si content; nano-precipitates; tensile strength; MECHANICAL-PROPERTIES; STEELS;
D O I：
10.1007/s11595-023-2773-6
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fe-12Cr-2.5W-xSi-0.4Ti-0.3Y(2)O(3) alloys were fabricated by mechanical alloying and vacuum sintering. The effect of sintering temperature and Si content on the microstructure and properties of the alloy was investigated systematically. The experimental results show that the relative density and tensile strength of the alloy were increased with the elevating of sintering temperature and Si content within a certain range. The alloy with 1wt% Si sintered at 1 350 & DEG;C exhibited superior properties, and the relative density and tensile strength were 96.8% and 692.7 MPa, respectively. HAADF and EDAX analysis of nano-precipitation in the matrix indicated that Si could combine with Y, Ti, and O in the sintering process, which was uniformly distributed with the size of 10 nm. Portion of Y2O3 had not completely dissolved in the milling process, which was retained in the matrix of the alloy.
引用
收藏
页码：893 / 896
页数：4
相关论文
共 50 条
  • [41] Effect of nano Y2O3 addition on microstructure and room temperature tensile properties of Ti-48Al-2Cr-2Nb alloy
    Tian, Jing
    Zhang, Dongdong
    Chen, Yuyong
    Zhang, Guoqing
    Sun, Jianfei
    VACUUM, 2019, 170
  • [42] The Effects of Al2O3 Amount on the Microstructure and Properties of Fe-Cr Matrix Composites
    Shamsuddin, Saidatulakmar
    Jamaludin, Shamsul Baharin
    Hussain, Zuhailawati
    Ahmad, Zainal Arifin
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (13): : 3452 - 3457
  • [43] Microstructure and mechanical properties of Al-Co-Cr-Fe-Ni-(Nb-Ti) high entropy alloys
    Ayrenk, A.
    Kalay, I
    PHILOSOPHICAL MAGAZINE, 2022, 102 (19) : 1961 - 1973
  • [44] Microstructure and properties of Cu-3Ti-0.3Cr-0.15Mg alloy designed via machine learning
    Guo, Xiaoyu
    Li, Longjian
    Liu, Gaojie
    Kang, Huijun
    Chen, Zongning
    Guo, Enyu
    Jie, Jinchuan
    Wang, Tongmin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 916
  • [45] Microstructure and Tensile Properties of Cost-Efficient Thermally Hardenable α + β Alloys of Ti–Al–Mo–Fe and Ti–Al–Mo–Cr Systems
    P. E. Markovsky
    S. V. Akhonin
    V. A. Berezos
    V. I. Bondarchuk
    O. O. Stasuk
    O. P. Karasevska
    I. M. Gavrysh
    Metallography, Microstructure, and Analysis, 2020, 9 : 856 - 872
  • [46] A Study on the Tribological Properties of Al-AlN-Y2W3O12Hybrid Composites
    Sethi, Jamuna
    Mohapatra, Sudipta
    Sethi, Abhijeet
    Das, Siddhartha
    Das, Karabi
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (09) : 5638 - 5654
  • [47] Effect of activating flux Cr2O3 on microstructure and properties of laser welded 5083 aluminum alloys
    Huang, Yiming
    Yuan, Yuxue
    Feng, Yingchao
    Liu, Jinping
    Yang, Lijun
    Cui, Lei
    OPTICS AND LASER TECHNOLOGY, 2022, 150
  • [48] On the Microstructure and Properties of Nb-12Ti-18Si-6Ta-2.5W-1Hf (at.%) Silicide-Based Alloys with Ge and Sn Additions
    Zhao, Jiang
    Utton, Claire
    Tsakiropoulos, Panos
    MATERIALS, 2020, 13 (07)
  • [49] Effect of TiC0.4 on microstructure and properties of Ti3SiC2 matrix composites
    Zou, Qin
    Lou, Zhichao
    Li, Yanguo
    Liu, Junlong
    Luo, Yong'an
    COMPOSITES COMMUNICATIONS, 2023, 40
  • [50] Effect of the addition of Y and Y2O3 on microstructure and mechanical properties of 15Cr-15Ni ODS steel
    Zhao, Ruilin
    Jia, Haodong
    Zhou, Zhangjian
    Cao, Shuguang
    Tong, Zhenfeng
    NUCLEAR MATERIALS AND ENERGY, 2022, 31
12345