Impact of metal mould vibration on the mechanical properties of aluminium 6082 t6 alloy

被引：0

作者：

Bobba, Sujith ^{[1
]}

Babu, B. Harish ^{[2
]}

Rao, N. Narayan ^{[1
]}

机构：

[1] Vignans Fdn Sci Technol & Res VFSTR, Dept Appl Engn, Guntur, India

[2] Vallurupalli Nageswara Rao Vignana Jyothi Inst Eng, Dept Automobile Engn, Hyderabad, India

来源：

ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES | 2024年 / 10卷 / 04期

关键词：

Vibration casting; Aluminium; 6082; T6; Electronic tensiometer; vickers hardness; SEM analysis; BEHAVIOR;

D O I：

10.1080/2374068X.2023.2190672

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Casting is a technique used to prepare machinery parts. Casting during vibration is one of the techniques used to improve the properties of material. In this paper, the effect of mould vibration on the properties of gravity die casting alloys is studied. This process decreases the porosity, holes and increase in the grain refinement of cast alloy. Aluminium 6082 T6 alloy is made by casting process, with and without vibration. The frequencies varied from 0 Hz to 45 Hz. The material is tested on electronic tensiometer and vickers hardness to check its tensile strength and hardness. The outcomes showed improvement in grain refinement and properties when vibration is applied during casting. With this improvement, it can be widely used in trusses, bridges, cranes and transport applications.

引用

页码：2853 / 2861

页数：9

共 50 条

[41] Effect of Sr-Ti-B and T6 Heat Treatment on Microstructure and Mechanical Properties of Sand Cast A360 Alloy
Karakoca, Alper
Yilmaz, Serdar Osman
INTERNATIONAL JOURNAL OF METALCASTING, 2024,
[42] Microstructure and Mechanical Properties of AA6082-T6 by ECAP Under Warm Processing
Khelfa, T.
Munoz-Bolanos, J. A.
Li, F.
Cabrera-Marrero, J. M.
Khitouni, M.
METALS AND MATERIALS INTERNATIONAL, 2020, 26 (08) : 1247 - 1261
[43] Investigating impact of in-process cooling mediums on microstructural and mechanical properties of FSWed AA2219 T6 joints
Hussain, Ghulam
Shehbaz, Tauheed
Alkahtani, Mohammed
SCIENTIFIC REPORTS, 2024, 14 (01):
[44] Effects of T6 heat treatment on mechanical, abrasive and erosive-corrosive wear properties of eutectic Al-Si alloy
Gupta, A. K.
Prasad, B. K.
Pajnoo, R. K.
Das, S.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (05) : 1041 - 1050
[45] Effects of directional grain structure on impact properties and dislocation substructure of 6061-T6 aluminium alloy
Lee, W. -S.
Liu, M. -H.
MATERIALS SCIENCE AND TECHNOLOGY, 2014, 30 (14) : 1719 - 1727
[46] T6 heat treatment of rheocasting 7075 Al alloy
Mahathaninwong, N.
Plookphol, T.
Wannasin, J.
Wisutmethangoon, S.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 532 : 91 - 99
[47] Mechanical properties and microstructural characteristics of friction stir welded AA2014-T6 aluminium alloy joints
Rajendran, Chinnasamy
Srinivasan, Kasi
Balasubramanian, Visvalingam
Balaji, Haridasu
Selvaraj, Ponnumuthu
JOURNAL OF THE MECHANICAL BEHAVIOR OF MATERIALS, 2019, 28 (01) : 169 - 185
[48] Effect of a Minor Sr Modifier on the Microstructures and Mechanical Properties of 7075 T6 Al Alloys
Ma, Shaoming
Sun, Youhong
Wang, Huiyuan
Lu, Xiaoshu
Qian, Ming
Ma, Yinlong
Zhang, Chi
Liu, Baochang
METALS, 2017, 7 (01):
[49] Heat treatment T4 and T6 effects on the tribological properties of sillimanite mineral-reinforced LM30 aluminium alloy composites at elevated temperatures
Sharma, Sandeep
Nanda, Tarun
Pandey, O. M. Prakash
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2022, 236 (05) : 946 - 959
[50] Gradient microstructure and vibration fatigue properties of 2024-T351 aluminium alloy treated by laser shock peening
Meng, Xian-kai
Wang, Hui
Tan, Wen-sheng
Cai, Jie
Zhou, Jian-zhong
Liu, Lin
SURFACE & COATINGS TECHNOLOGY, 2020, 391

← 1 2 3 4 5 →