Impact of metal mould vibration on the mechanical properties of aluminium 6082 t6 alloy

被引：0
作者：
Bobba, Sujith [1 ]
Babu, B. Harish [2 ]
Rao, N. Narayan [1 ]
机构：
[1] Vignans Fdn Sci Technol & Res VFSTR, Dept Appl Engn, Guntur, India
[2] Vallurupalli Nageswara Rao Vignana Jyothi Inst Eng, Dept Automobile Engn, Hyderabad, India
来源：
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES | 2024年 / 10卷 / 04期
关键词：
Vibration casting; Aluminium; 6082; T6; Electronic tensiometer; vickers hardness; SEM analysis; BEHAVIOR;
D O I：
10.1080/2374068X.2023.2190672
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Casting is a technique used to prepare machinery parts. Casting during vibration is one of the techniques used to improve the properties of material. In this paper, the effect of mould vibration on the properties of gravity die casting alloys is studied. This process decreases the porosity, holes and increase in the grain refinement of cast alloy. Aluminium 6082 T6 alloy is made by casting process, with and without vibration. The frequencies varied from 0 Hz to 45 Hz. The material is tested on electronic tensiometer and vickers hardness to check its tensile strength and hardness. The outcomes showed improvement in grain refinement and properties when vibration is applied during casting. With this improvement, it can be widely used in trusses, bridges, cranes and transport applications.
引用
收藏
页码：2853 / 2861
页数：9
相关论文
共 50 条
  • [31] Analysis of deformation history and damage initiation for 6082-T6 aluminium alloy loaded at classic and symmetric Taylor impact test conditions
    Mocko, W.
    Janiszewski, J.
    Radziejewska, J.
    Grazka, M.
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2015, 75 : 203 - 213
  • [32] Effect of vibration casting on the properties and microstructure of aluminium alloy castings
    Buch, Vyomesh
    Oza, Ankit D.
    Sandeep
    Kumar, Manoj
    Gupta, Manish
    Midha, Shuchi
    INNOVATION AND EMERGING TECHNOLOGIES, 2023, 10
  • [33] Evolution of Precipitates in a Mechanical Vibration-Assisted Metal Inert Gas Welded Joint of 6082-T6 Aluminum Alloy Made with an ER5356 Filler Wire
    Shi, Mingxiao
    Chen, Jiugong
    Wang, Weihua
    Li, Jingyong
    Mao, Weidong
    Li, Shengliang
    Ma, Xiang
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
  • [34] The Evaluation of the Fracture Surface in the AW-6060 T6 Aluminium Alloy under a Wide Range of Loads
    Chybinski, Marcin
    Polus, Lukasz
    Ratajczak, Maria
    Sielicki, Piotr W.
    METALS, 2019, 9 (03):
  • [35] Effect of vacuum degree and T6 treatment on the microstructure and mechanical properties of Al-Si-Cu alloy die castings
    Cao, Hanxue
    Sun, Qicai
    Pu, Qingqing
    Wang, Luhan
    Huang, Mengtao
    Luo, Ziwei
    Che, Junqi
    VACUUM, 2020, 172
  • [36] Microstructural evolution and mechanical properties of oil jet peened aluminium alloy, AA6063-T6
    Prakash, N. Arun
    Gnanamoorthy, R.
    Kamaraj, M.
    MATERIALS & DESIGN, 2010, 31 (09) : 4066 - 4075
  • [37] Local Mechanical Properties and Microstructure of EN AW 6082 Aluminium Alloy Processed via ECAP-Conform Technique
    Prochazka, Radek
    Slama, Peter
    Dlouhy, Jaromir
    Konopik, Pavel
    Trojanova, Zuzanka
    MATERIALS, 2020, 13 (11)
  • [38] Microstructures and Mechanical Properties of A356 Alloy and A6061 Alloy through Rheo, Upsetting, Thixo, Forming Process, and T6 Heat Treatment
    Jin, Chul Kyu
    METALS, 2022, 12 (12)
  • [39] Microstructure and mechanical properties of 6082-T6 aluminum alloy-zinc coated steel braze-welded joints
    Mitelea, Ion
    Craciunescu, Corneliu Marius
    Lucian, Ciprian Pavel
    Utu, Ion Dragos
    MATERIALS TESTING, 2021, 63 (08) : 721 - 727
  • [40] HEAT TREATMENT T4 AND T6 EFFECTS ON MECHANICAL PROPERTIES IN AL-CU ALLOY AFTER REMELT WITH DIFFERENT POURING TEMPERATURES
    Iswanto, P. T.
    Akhyar
    Pambekti, A.
    METALURGIJA, 2020, 59 (02): : 171 - 174
12345