Impact of metal mould vibration on the mechanical properties of aluminium 6082 t6 alloy

被引：0
作者：
Bobba, Sujith [1 ]
Babu, B. Harish [2 ]
Rao, N. Narayan [1 ]
机构：
[1] Vignans Fdn Sci Technol & Res VFSTR, Dept Appl Engn, Guntur, India
[2] Vallurupalli Nageswara Rao Vignana Jyothi Inst Eng, Dept Automobile Engn, Hyderabad, India
来源：
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES | 2024年 / 10卷 / 04期
关键词：
Vibration casting; Aluminium; 6082; T6; Electronic tensiometer; vickers hardness; SEM analysis; BEHAVIOR;
D O I：
10.1080/2374068X.2023.2190672
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Casting is a technique used to prepare machinery parts. Casting during vibration is one of the techniques used to improve the properties of material. In this paper, the effect of mould vibration on the properties of gravity die casting alloys is studied. This process decreases the porosity, holes and increase in the grain refinement of cast alloy. Aluminium 6082 T6 alloy is made by casting process, with and without vibration. The frequencies varied from 0 Hz to 45 Hz. The material is tested on electronic tensiometer and vickers hardness to check its tensile strength and hardness. The outcomes showed improvement in grain refinement and properties when vibration is applied during casting. With this improvement, it can be widely used in trusses, bridges, cranes and transport applications.
引用
收藏
页码：2853 / 2861
页数：9
相关论文
共 50 条
  • [21] Effect of Te, Sb Addition on the Microstructure and Mechanical Properties of ZL114A Alloy in T6 State
    Fan Zhenzhong
    Wang Duanzhi
    Wang Kunpeng
    Xiong Yancai
    Lu Zheng
    Zheng Weidong
    RARE METAL MATERIALS AND ENGINEERING, 2018, 47 (12) : 3880 - 3886
  • [22] Microstructural evolution and mechanical properties of multiwalled carbon nanotubes/Al6082 nanocomposites through optimized T6 heat treatment process
    Baghel, Madhusudan
    Krishna, C. M.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2023, 237 (04) : 1145 - 1157
  • [23] Normal Temperature Mechanical Properties of 6082 Aluminium Alloy as a Function of Tempering Temperature: Experimental and Numerical Approach
    Elhadi, Abdelmalek
    Amroune, Salah
    Houari, Amin
    Kouder, Madani
    ACTA MECHANICA ET AUTOMATICA, 2024, 18 (03) : 385 - 392
  • [24] Investigation of T4 and T6 heat treatment on the wear properties of sillimanite reinforced LM30 aluminium alloy composites
    Sharma, Sandeep
    Nanda, Tarun
    Pandey, O. P.
    WEAR, 2019, 426 : 27 - 36
  • [25] Ballistic impact assessment of Aluminium Alloy 7075 T6, Kevlar and basalt fiber reinforced composite laminate with different nano fillers
    Rakeshkumar, C.
    Jayakumar, K. S.
    MATERIALS RESEARCH EXPRESS, 2023, 10 (02)
  • [26] Mechanical behavior of gas metal arc AA6082-T6 weldments
    Leoni, Francesco
    Sandness, Lise
    Grong, Oystein
    Berto, Filippo
    25TH INTERNATIONAL CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY, 2019, 18 : 449 - 456
  • [27] Mechanical testing of gas metal arc AA6082-T6 weldments
    Leoni F.
    Sandnes L.
    Grong Ø.
    Berto F.
    Material Design and Processing Communications, 2021, 3 (02)
  • [28] Effect of pouring and cooling temperatures on microstructures and mechanical properties of as-cast and T6 treated A356 alloy
    Hu, Xin-ping
    Zhao, Yang
    Wang, Qing
    Zhang, Xue-zhi
    Li, Rui-xin
    Zhang, Bing-rong
    CHINA FOUNDRY, 2019, 16 (06) : 380 - 385
  • [29] Microstructure Evolution and Mechanical Properties of the T6 Heat Treated AA6063 Alloy Produced by Squeeze Casting
    Souissi, S.
    Barhoumi, H.
    ben Amar, M.
    Elhalouani, F.
    PHYSICS OF METALS AND METALLOGRAPHY, 2019, 120 (08) : 806 - 812
  • [30] Influence of Y Content and T6 Heat Treatment on the Organization and Mechanical Properties of Cast A356 Aluminum Alloy
    Ye, Kefeng
    Cai, Xiaolan
    Zhou, Lei
    Ma, Silong
    Yue, Youcheng
    Xu, Fushun
    Zheng, Deqian
    Tan, Junhao
    Chen, Yuping
    INTEGRATED FERROELECTRICS, 2024, 240 (03) : 477 - 485
12345