Impact of metal mould vibration on the mechanical properties of aluminium 6082 t6 alloy

被引：0
作者：
Bobba, Sujith [1 ]
Babu, B. Harish [2 ]
Rao, N. Narayan [1 ]
机构：
[1] Vignans Fdn Sci Technol & Res VFSTR, Dept Appl Engn, Guntur, India
[2] Vallurupalli Nageswara Rao Vignana Jyothi Inst Eng, Dept Automobile Engn, Hyderabad, India
来源：
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES | 2024年 / 10卷 / 04期
关键词：
Vibration casting; Aluminium; 6082; T6; Electronic tensiometer; vickers hardness; SEM analysis; BEHAVIOR;
D O I：
10.1080/2374068X.2023.2190672
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Casting is a technique used to prepare machinery parts. Casting during vibration is one of the techniques used to improve the properties of material. In this paper, the effect of mould vibration on the properties of gravity die casting alloys is studied. This process decreases the porosity, holes and increase in the grain refinement of cast alloy. Aluminium 6082 T6 alloy is made by casting process, with and without vibration. The frequencies varied from 0 Hz to 45 Hz. The material is tested on electronic tensiometer and vickers hardness to check its tensile strength and hardness. The outcomes showed improvement in grain refinement and properties when vibration is applied during casting. With this improvement, it can be widely used in trusses, bridges, cranes and transport applications.
引用
收藏
页码：2853 / 2861
页数：9
相关论文
共 50 条
  • [1] The Influence of Shot Peening Media on Surface Properties and Fatigue Behaviour of Aluminium Alloy 6082 T6
    Calvo-Garcia, Erik
    del Val, Jesus
    Riveiro, Antonio
    Valverde-Perez, Sara
    Alvarez, David
    Roman, Manuel
    Magdalena, Cesar
    Badaoui, Aida
    Pou-Alvarez, Pablo
    Comesana, Rafael
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2024, 8 (05):
  • [2] Investigation of the Mechanical Properties of Friction Drilling with 6082-T6 Aluminium Alloy
    Wu, Hao
    Porter, Mark
    Ward, Richard
    Quinn, Justin
    McGarrigle, Cormac
    McFadden, Shaun
    MATERIALS, 2022, 15 (07)
  • [3] Influence of corrosion fatigue on the stress gradient effect of the aluminium alloy EN AW-6082 T6
    Schoenowitz, Markus
    Maier, Bernd
    Gruen, Florian
    INTERNATIONAL JOURNAL OF FATIGUE, 2024, 184
  • [4] Finite element analysis of welded beam-to-column joints in aluminium alloy EN AW 6082 T6
    Wang, T.
    Hopperstad, O. S.
    Lademo, O. -G.
    Larsen, P. K.
    FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2007, 44 (1-2) : 1 - 16
  • [5] Experimental Analysis of the Behaviour of Aluminium Alloy EN 6082AW T6 at High Temperature
    Toric, Neno
    Brnic, Josip
    Boko, Ivica
    Brcic, Marino
    Burgess, Ian W.
    Uzelac, Ivana
    METALS, 2017, 7 (04):
  • [6] Investigating the Effect of Various Forge Forces on the Mechanical Properties of Aluminium 6082 T6 Joined by Friction Stir Welding Process
    Gaonnwe, T.
    Mashinini, P. M.
    Pita, M.
    2024 15TH INTERNATIONAL CONFERENCE ON MECHANICAL AND INTELLIGENT MANUFACTURING TECHNOLOGIES, ICMIMT 2024, 2024, : 181 - 185
  • [7] Effect of T6 heat treatment on microstructure and mechanical properties of 6082 aluminum alloy automotive flange components formed by squeeze casting
    Jiang, Jufu
    Cui, Jingbo
    Wang, Ying
    Huang, Minjie
    Dong, Jian
    Yan, Jing
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 912
  • [8] Evaluation of Fracture Toughness and Mechanical Properties of Aluminum Alloy 7075, T6 with Nickel Coating
    Kumar, Mohan S.
    Pramod, R.
    Kumar, Shashi M. E.
    Govindaraju, H. K.
    12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 178 - 185
  • [9] Post-fire mechanical properties of aluminum alloy 6082-T6
    Liu, Yu
    Liu, Hongbo
    Chen, Zhihua
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 196 : 256 - 266
  • [10] Effect of Shot Peening on the Strength and Corrosion Properties of 6082-T651 Aluminium Alloy
    Ravnikar, Dunja
    Sturm, Roman
    Zagar, Sebastjan
    MATERIALS, 2023, 16 (14)
12345