Engineering of Solar Energy Harvesting Tb3+-Ion-Doped CdS Quantum Dot Glasses for Photodissociation of Hydrogen Sulfide

The photocatalytic properties of CdS quantum dots (Q-dots) and Tb3+-doped CdS Q-dots dispersed in a borosilicate glass matrix were investigated for the photodissociation of hydrogen sulfide (H2S) into hydrogen (H-2) gas and elemental sulfur (S). The Q-dot-containing glass samples were fabricated using the conventional melt-quench method and isothermal annealing between 550 and 600 degrees C for 6 h for controlling the growth of CdS and Tb3+-ion-doped CdS Q-dots. The structure, electronic band gap, and spectroscopic properties of the Q-dots formed in the glass matrix after annealing were analyzed using Raman and UV-visible spectroscopies, X-ray powder diffraction, and transmission electron microscopy. With increasing annealing temperature, the average size range of the Q-dots increased, corresponding to the decrease of electronic band gap from 3.32 to 2.24 eV. For developing the model for photocatalytic energy exchange, the excited state lifetime and photoluminescence emission were investigated by exciting the CdS and Tb3+-doped CdS quantum states with a 450 nm source. The results from the photoluminescence and lifetime demonstrated that the Tb3+-CdS photodissociation energy exchange is more efficient from the excited Q-dot states compared to the CdS Q-dot glasses. Under natural sunlight, the hydrogen production experiment was conducted, and an increase of 26.2% in hydrogen evolution rate was observed from 0.02 wt % Tb3+-doped CdS (3867 mu mol/h/0.5 g) heat-treated at 550 degrees C when compared to CdS Q-dot glass with a similar heat treatment temperature (3064 mu mol/h/0.5 g). Furthermore, the photodegradation stability of 0.02 wt % Tb3+-CdS was analyzed by reusing the catalyst glass powders four times with little evidence of degradation.