Crack-Free Tungsten Fabricated via Laser Powder Bed Fusion Additive Manufacturing

被引：16

作者：

Ramakrishnan, Tejas ^{[1
]}

Kumar, Amit ^{[1
]}

Kumar, Tumulu S. ^{[1
]}

Kwon, Sunyong ^{[1
]}

Muniz-Lerma, Jose A. ^{[1
]}

Gauvin, Raynald ^{[1
]}

Brochu, Mathieu ^{[1
]}

机构：

[1] McGill Univ, Dept Min & Mat Engn, Wong Bldg,3610 Univ St, Montreal, PQ H3A 0C5, Canada

来源：

ADVANCED FUNCTIONAL MATERIALS | 2024年 / 34卷 / 12期

基金：

加拿大自然科学与工程研究理事会;

关键词：

DFT calculations; grain boundary engineering; laser powder bed fusion; refractory metal; tungsten; CRYSTALLOGRAPHIC TEXTURE; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; GRAIN-BOUNDARIES; PURE TUNGSTEN; MICROSTRUCTURE; NITROGEN; BEHAVIOR; DENSIFICATION; TRANSITION;

D O I：

10.1002/adfm.202309304

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

Additive manufacturing of tungsten (W) is challenging due to its high melting point, high thermal conductivity, oxidation tendency, and brittleness from grain boundary (GB) oxides. In this study, the processing of W through laser powder bed fusion is investigated. Parts are fabricated under argon (Ar) and nitrogen (N2) atmospheres using the same processing parameters. The part produced in Ar has cracks with oxide precipitates decorating the fractured GBs. On the other hand, crack-free W samples are produced under N2 atmosphere without any additional process modification. In both cases, the oxygen (O) content in the LPBF samples is similar to the starting powder. Interestingly, the analysis of the samples fabricated in nitrogen suggests that nitrogen is retained beyond the equilibrium solid solubility limit, while high-resolution electron micrographs of fractured surfaces reveal reduced levels of oxides at GBs. Increased hardness for samples processed under N2 atmosphere is observed. Density Functional Theory (DFT) calculations performed to study the influence of interstitial nitrogen on oxygen diffusion in W indicated a hindrance to O diffusion from the presence of dissolved N. Additive manufacturing of tungsten (W) is challenging due to its high melting point, and brittleness from GB oxides. In this study, the processing of W through laser powder bed fusion is investigated. Parts are fabricated under argon (Ar) and nitrogen (N2). The part produced in Ar has cracks with oxide precipitates decorating the fractured grain boundaries, while crack-free parts are produced under N2 atmosphere without any additional process modification.image

引用

页数：12

共 80 条

[1] First-principles investigation on dissolution and diffusion of oxygen in tungsten [J].

Alkhamees, Abdullah ;

Liu, Yue-Lin ;

Zhou, Hong-Bo ;

Jin, Shuo ;

Zhang, Ying ;

Lu, Guang-Hong .

JOURNAL OF NUCLEAR MATERIALS, 2009, 393 (03) :508-512

[2] Microstructure and mechanical properties of rene 41 alloy manufactured by laser powder bed fusion [J].

Atabay, Sila Ece ;

Sanchez-Mata, Oscar ;

Muniz-Lerma, Jose Alberto ;

Gauvin, Raynald ;

Brochu, Mathieu .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 773 (773)

[3]

Ault G. M., 1965, NASA TECHNICAL MEMOR

[4] Single scan track analyses on aluminium based powders [J].

Aversa, Alberta ;

Moshiri, Mandana ;

Librera, Erica ;

Hadi, Mehdi ;

Marchese, Giulio ;

Manfredi, Diego ;

Lorusso, Massimo ;

Calignano, Flaviana ;

Biamino, Sara ;

Lombardi, Mariangela ;

Pavese, Matteo .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 255 :17-25

[5] FactSage thermochemical software and databases, 2010-2016 (vol 54, pg 35, 2016) [J].

Bale, C. W. ;

Belisle, E. ;

Chartrand, P. ;

Decterov, S. A. ;

Eriksson, G. ;

Gheribi, A. E. ;

Hack, K. ;

Jung, I. -H. ;

Kang, Y. -B. ;

Melancon, J. ;

Pelton, A. D. ;

Petersen, S. ;

Robelin, C. ;

Sangster, J. ;

Spencer, P. ;

Van Ende, M. -A. .

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 2016, 55 :1-19

[6] NITROGEN ACTIVITY DETERMINATION IN PLASMAS [J].

BANDOPADHYAY, A ;

BANERJEE, A ;

DEBROY, T .

METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1992, 23 (02) :207-214

[7] Fluid and particle dynamics in laser powder bed fusion [J].

Bidare, P. ;

Bitharas, I. ;

Ward, R. M. ;

Attallah, M. M. ;

Moore, A. J. .

ACTA MATERIALIA, 2018, 142 :107-120

[8] Molybdenum and tungsten manufactured by selective laser melting: Analysis of defect structure and solidification mechanisms [J].

Braun, J. ;

Kaserer, L. ;

Stajkovic, J. ;

Leitz, K-H ;

Tabernig, B. ;

Singer, P. ;

Leibenguth, P. ;

Gspan, C. ;

Kestler, H. ;

Leichtfried, G. .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2019, 84

[9]

Briant C. L., 2004, SCI TECHNOLOGY, V1, P8088

[10]

Briant C. L., 2001, NEW APPL NOVEL PROCE, V1, P389

← 1 2 3 4 5 6 7 8 →