OPTIMIZATION OF THE STEEL FLOW IN THE TWO-STRAND TUNDISH USING DIFFERENT GEOMETRY OF IMPACT PAD

被引：0

作者：

Cupek, J. ^{[1
]}

Walek, J. ^{[1
]}

Tkadleckova, M. ^{[1
]}

Pieprzyca, J. ^{[2
]}

Merder, T. ^{[2
]}

Saternus, M. ^{[2
]}

机构：

[1] Tech Univ Ostrava VSB, Ostrava, Czech Republic

[2] Silesian Tech Univ, Fac Mat Sci, Katowice, Poland

来源：

METALURGIJA | 2023年 / 62卷 / 02期

关键词：

tundish; liquid steel flow; arrangement of working space; physical water model;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

One of the primary factors affecting the quality of continuously cast billets is the way the steel flows and mixes in the tundish of Continuous Steel Casting (CSC) machine. This is of particular importance in the case of continuous billets. The article presents the results of model tests of identifying the mechanism of liquid steel flow through a tundish under the influence of the applied arrangement of the working space. Two models of turbulence inhibitors and an impact pad with the surface of a sphere segment were used for the research. The tests were carried out with the use of the physical water model of the CSC device, and the obtained results were verified by numerical methods.

引用

页码：179 / 182

页数：4

共 15 条

[1] Optimization of flow uniformity control device for six-stream continuous casting tundish
Ai, Xin-gang
Han, Dong
Li, Sheng-li
Zeng, Hong-bo
Li, Hui-ya
[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2020, 27 (09) : 1035 - 1044
[2] [Anonymous], 2022, ANSYS FLUENT VER 19
[3] Geometric Modification of the Tundish Impact Point
Bul'ko, Branislav
Priesol, Ivan
Demeter, Peter
Gasparovic, Peter
Baricova, Dana
Hrubovcakova, Martina
[J]. METALS, 2018, 8 (11)
[4] Numerical and Physical Modeling of Liquid Steel Active Flow in Tundish with Subflux Turbulence Controller and Dam
Cwudzinski, Adam
[J]. STEEL RESEARCH INTERNATIONAL, 2014, 85 (05) : 902 - 917
[5] Kudli ski Z., 2006, STEEL CASTING TECHNO
[6] Launder B. E., 1974, Computer Methods in Applied Mechanics and Engineering, V3, P269, DOI 10.1016/0045-7825(74)90029-2
[7] Hydrodynamic and Mathematical Simulations of Flow Field and Temperature Profile in an Asymmetrical T-type Single-strand Continuous Casting Tundish
Liu, Song-xia
Yang, Xue-min
Du, Lin
Li, Liang
Liu, Cheng-zhi
[J]. ISIJ INTERNATIONAL, 2008, 48 (12) : 1712 - 1721
[8] Modeling study of the influence of turbulence inhibitors on the molten steel flow, tracer dispersion, and inclusion trajectories in tundishes
López-Ramirez, S
Barreto, JD
Palafox-Ramos, J
Morales, RD
Zacharias, D
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2001, 32 (04): : 615 - 627
[9] Modeling Research Technique of Nonmetallic Inclusions Distribution in Liquid Steel during Its Flow through the Tundish Water Model
Merder, Tomasz
Warzecha, Marek
Warzecha, Piotr
Pieprzyca, Jacek
Hutny, Artur
[J]. STEEL RESEARCH INTERNATIONAL, 2019, 90 (10)
[10] STUDY OF TUNDISH SLAG ENTRAINMENT USING PHYSICAL MODELLING
Michalek, K.
Gryc, K.
Socha, L.
Tkadleckova, M.
Saternus, M.
Pieprzyca, J.
Merder, T.
Pindor, L.
[J]. ARCHIVES OF METALLURGY AND MATERIALS, 2016, 61 (01) : 257 - 260

← 1 2 →