Characterization of phase transformation and strengthening mechanisms in a novel maraging steel produced using laser-based powder bed fusion

被引：8

作者：

Nouri, Niki ^{[1
]}

Li, Qing ^{[1
]}

Schneider, Reinhard ^{[2
]}

Damon, James ^{[1
]}

Schuessler, Philipp ^{[1
]}

Laube, Stephan ^{[1
]}

Mueller, Erich ^{[2
]}

Graf, Gregor ^{[3
]}

Schulze, Volker ^{[1
]}

Dietrich, Stefan ^{[1
]}

机构：

[1] Karlsruhe Inst Technol, Inst Appl Mat Mat Sci & Engn IAM WK, Karlsruhe, Germany

[2] Karlsruhe Inst Technol KIT, Lab Electron Microscopy LEM, Karlsruhe, Germany

[3] Rosswag GmbH, August Rosswag Str 1, Karlsruhe, Germany

来源：

MATERIALS CHARACTERIZATION | 2024年 / 207卷

关键词：

Maraging steel; Phase transformation kinetics; Intermetallic phases; Precipitation hardening; Grain refinement; PRECIPITATION REACTIONS; SELF-DIFFUSION; AGING BEHAVIOR; HEATING RATE; GRAIN SIZE; KINETICS; NICKEL; PERFORMANCE; MARTENSITE; EVOLUTION;

D O I：

10.1016/j.matchar.2023.113522

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A novel maraging steel for additive manufacturing, Specialis (R), has been investigated to achieve a better understanding of the increase in hardness compared to conventional maraging steels. Phase transformations upon various heating rates have been evaluated by means of dilatometry and differential scanning caloriometry. The results were used to estimate the activation energy of precipitation formation. Microstructural characterization has been carried out by means of scanning electron microscopy and transmission electron microscopy, using electron backscatter diffraction, energy-dispersive X-ray spectroscopy, selected-area electron diffraction and electron energy loss spectroscopy. Two significant strengthening effects were identified in comparison to 18Ni300. Firstly, the elevated amount of Ti in Specialis (R) has increased the precipitation, raising the hardness through the Orowan mechanism. Secondly, a grain refinement has been observed as a result of the addition of V and Al, which has doubled the grain boundary strengthening mechanism known as the Hall-Petch effect. Finally, the calculated strength increase due to both mechanisms (159 MPa Hall-Petch + 328 MPa Orowan) was consistent with the difference observed in measured tensile strengths between Specialis (R) and 18Ni300 (395 MPa).

引用

页数：11

共 59 条

[21] Hall A.M., 1968, METALLURGY BEHAV APP
[22] THE DEFORMATION AND AGEING OF MILD STEEL .3. DISCUSSION OF RESULTS
HALL, EO
[J]. PROCEEDINGS OF THE PHYSICAL SOCIETY OF LONDON SECTION B, 1951, 64 (381): : 747 - 753
[23] DIFFUSION OF ALUMINUM IN ION-IMPLANTED ALPHA-IRON
HIRVONEN, J
RAISANEN, J
[J]. JOURNAL OF APPLIED PHYSICS, 1982, 53 (04) : 3314 - 3316
[24] SELF-DIFFUSION AND DIFFUSION OF COBALT IN ALPHA AND DELTA-IRON
JAMES, DW
LEAK, GM
[J]. PHILOSOPHICAL MAGAZINE, 1966, 14 (130): : 701 - &
[25] On the α′ to γ transformation in maraging (grade 350), PH 13-8 Mo and 17-4 PH steels
Kapoor, R
Batra, IS
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 371 (1-2): : 324 - 334
[26] Dilatometric study of the continuous heating transformations in 18wt.% Ni maraging steel of grade 350
Kapoor, R
Kumar, L
Batra, IS
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 352 (1-2): : 318 - 324
[27] REACTION KINETICS IN DIFFERENTIAL THERMAL ANALYSIS
KISSINGER, HE
[J]. ANALYTICAL CHEMISTRY, 1957, 29 (11) : 1702 - 1706
[28] VARIATION OF PEAK TEMPERATURE WITH HEATING RATE IN DIFFERENTIAL THERMAL ANALYSIS
KISSINGER, HE
[J]. JOURNAL OF RESEARCH OF THE NATIONAL BUREAU OF STANDARDS, 1956, 57 (04): : 217 - 221
[29] KOCKS UF, 1975, PROG MATER SCI, V19, P1
[30] Korchynsky M., 2001, P VAN S, P26

← 1 2 3 4 5 6 →