Numerical analysis of catalyst particle deposition characteristics in a flue gas turbine with an improved particle motion and deposition model

To more accurately understand and predict the deposition behavior of catalyst particles in the flue gas turbine cascade, test and numerical combined study is performed in this paper. Based on the systematic analysis of the deposition process and physical mechanism of the catalyst particles, the traditional DRW model, critical velocity particle deposition model and removal model were corrected with the user defined function custom function and validated with the actual deposition morphology. On this basis, the effects of the particle Stokes number and flue gas parameters on the particle deposition characteristics of the flue gas turbine cascade were detailed investigated. The results show that the revised DRW model, critical velocity and removal model can more accurately predict the deposition location and deposition rate of particles in the turbine cascade. With the increase in the Stokes number of particles, the average particle impact rate on the blade surface gradually increased, while the average deposition rate showed a trend of first increasing and then decreasing. The average deposition rate of particles in the rotor blade surface is roughly twice as high as that in the stator surface. With the increase of the flue gas expansion ratio, the deposition rate of particles less than 3 & mu;m gradually increases, while the deposition rate of particles greater than 3 & mu;m tends to decrease. In addition, the change in the flue gas expansion ratio has no obvious effect on the particle deposition distribution in different size ranges.