Effect of One Step Solid State Reaction Route on the Semiconductor Behavior of the Spinel (NI, Co, and Mn)O4 to Be Used as Temperature Sensor

Achieving carbon neutrality is important to solve environmental problems and thus requires decarbonizing manufacturing processes to reduce greenhouse gas emissions. The firing of ceramics, including calcination and sintering, is a typical fossil fuels-driven manufacturing process that requires large power consumption. Although the firing process in manufacturing ceramics cannot be eliminated, an effective firing strategy to reduce processing steps can be a choice to lower power consumption. Herein, we suggest a one-step solid solution reaction (SSR) route to manufacture (Ni, Co, and Mn)O-4 (NMC) electroceramics for their application in temperature sensors with negative temperature coefficient (NTC). Additionally, the effect of the one-step SSR route on the electrical properties of the NMC is investigated. Similar to the NMC prepared using the two-step SSR route, spinel structures with dense microstructure are observed in the NMC prepared via the one-step SSR route. Based on the experimental results, the one-step SSR route can be considered as one of the effective processing techniques with less power consumption to manufacture electroceramics.