Evolution of M7C3 carbides near the solidus and the influence of Mn element on the formation of M23C6 carbides in a high carbon martensitic stainless steel 90Cr18MoV

被引：9
作者：
Liu, Wenle [1 ,3 ]
Guo, Fujian [3 ,4 ]
Liang, Shenglong [3 ]
Wang, Xuelin [1 ,3 ]
Shang, Chengjia [2 ,3 ]
机构：
[1] Univ Sci & Technol Beijing, Collaborat Innovat Ctr Steel Technol, Beijing 100083, Peoples R China
[2] Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 100083, Peoples R China
[3] Guangdong Lab Mat Sci & Technol, Yangjiang Branch, Yangjiang Adv Alloys Lab, Yangjiang 529500, Guangdong, Peoples R China
[4] Guangdong Ocean Univ, Sch Mat Sci & Engn, Yangjiang 529500, Peoples R China
来源：
MATERIALS CHARACTERIZATION | 2023年 / 205卷
关键词：
Carbides; Dissolution; Transformation mechanism; High temperature heat treatment; Martensitic stainless steel; CAST-IRON; BEHAVIOR;
D O I：
10.1016/j.matchar.2023.113336
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The evolution behavior of M7C3 carbides in a 90Cr18MoV martensite stainless steel during high temperature diffusion annealing treatments at temperatures near the solidus was investigated. Results showed that only M7C3 carbides dissolved, and the dissolution of large-sized M7C3 carbides was limited when the temperature was below the solidus. However, when the temperature was above the solidus, a certain amount of liquid phase appeared around the grain boundaries. Meanwhile, two different types of precipitates appeared within the grains. And these two types of precipitates were eutectic products that mainly consisted of M7C3 carbides and bcc phase, and divorced eutectic products that mainly consisted of M23C6 carbides, respectively. Thermodynamic calculations indicated that with the increase of Mn content, the Gibbs free energy of M23C6 carbides would be lower than that of M7C3 carbides. Thus, the difference in Mn content was the main reason for the formation of those two types of precipitates, i.e., M7C3 carbides were formed in regions with low Mn content and M23C6 carbides were observed in areas with high Mn content.
引用
收藏
页数：13
相关论文
共 21 条
[1]   Microstructural and mechanical properties of AISI 440C stainless steel fabricated using selective laser melting [J].
Bang, Gyung Bae ;
Hwang, Young Jae ;
Kim, Won Rae ;
Song, Yeong Hwan ;
Kim, Gun Hee ;
Hyun, Soong-Keun ;
Cha, Sung Chul ;
Park, Heon Joon ;
Lee, Taeg Woo ;
Kim, Hyung Giun .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 860
[2]   Study of Carbide Evolution During Thermo-Mechanical Processing of AISI D2 Tool Steel [J].
Bombac, D. ;
Fazarinc, M. ;
Podder, A. Saha ;
Kugler, G. .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (03) :742-747
[3]   Effect of Mg-Re complex treatment on eutectic carbides in bearing steel [J].
Chang, L. Z. ;
Gao, G. ;
Shi, X. F. .
IRONMAKING & STEELMAKING, 2020, 47 (01) :59-66
[4]   Structure refinement of high-Cr cast iron by plasma surface melting and post-heat treatment [J].
Efremenko, V. G. ;
Chabak, Yu G. ;
Shimizu, K. ;
Lekatou, A. G. ;
Zurnadzhy, V. I. ;
Karantzalis, A. E. ;
Halfa, H. ;
Mazur, V. A. ;
Efremenko, B. V. .
MATERIALS & DESIGN, 2017, 126 :278-290
[5]   THE MORPHOLOGY OF EUTECTIC CARBIDES IN M2-GRADE HIGH-SPEED STEEL [J].
GHOMASHCHI, MR .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1985, 16 (12) :2341-2342
[6]   Precipitation Behavior of Modified as Cast High Nitrogen Super Hard High-Speed Tool Steel [J].
Halfa, Hossam ;
Mattar, Taha ;
Eissa, Mamdouh .
STEEL RESEARCH INTERNATIONAL, 2012, 83 (11) :1071-1078
[7]   Influence of Deep Cryogenic Treatment on the Mechanical Properties of AISI 440C Bearing Steel [J].
Idayan, A. ;
Gnanavelbabu, A. ;
Rajkumar, K. .
12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 :1683-1691
[8]  
Jinzhong H.X. Zuo, 2022, Spec. Steel, V43, P60, DOI [10.20057/j.1003-8620.2022-00167, DOI 10.20057/J.1003-8620.2022-00167]
[9]  
Li J, 2021, Carbide in Special Steel: Formation Mechanism and Control Technology, P109
[10]   Study on fragmentation and dissolution behavior of carbide in a hot-rolled hypereutectic high chromium cast iron [J].
Liu, Fei ;
Jiang, Yehua ;
Xiao, Han ;
Tan, Jun .
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 618 :380-385
123