Broad Temperature Plateau for High Thermoelectric Properties of n-Type Bi2Te2.7Se0.3 by 3D Printing-Driven Defect Engineering

High-energy-conversion Bi2Te3-based thermoelectric generators (TEGs) are needed to ensure that the assembled material has a high value of average figure of merit (ZTave). However, the inferior ZTave of the n-type leg severely restricts the large-scale applications of Bi2Te3-based TEGs. In this study, we achieved and reported a high peak ZT (1.33) of three-dimensional (3D)printing n-type Bi2Te2.7Se0.3. In addition, a superior ZT(ave) of 1.23 at a temperature ranging from 300 to 500 K was achieved. The high value of ZT(ave) was obtained by synergistically optimizing the electronic- and phonon-transport properties using the 3D-printing-driven defect engineering. The nonequilibrium solidification mechanism facilitated the multiscale defects formed during the 3D-printed process. Among the defects formed, the nanotwins triggered the energy-filtering effect, thus enhancing the Seebeck coefficient at a temperature range of 300-500 K. The effective scattering of wide-frequency phonons by multiscale defects reduced the lattice thermal conductivity close to the theoretical minimum of similar to 0.35 W m(-1) k(-1). Given the advantages of 3D printing in freeform device shapes, we assembled and measured bionic honeycombshaped single-leg TEGs, exhibiting a record-high energy conversion efficiency (10.2%). This work demonstrates the great potential of defect engineering driven by selective laser melting 3D-printing technology for the rational design of advanced n-type Bi2Te2.7Se0.3 thermoelectric material.