Thermo-Mechanically Stable, Liquid Metal Embedded Soft Materials for High-Temperature Applications

被引:12
作者
Herbert, Robert [1 ]
Mocny, Piotr [2 ]
Zhao, Yuqi [3 ]
Lin, Ting-Chih [2 ]
Zhang, Junbo [4 ]
Vinciguerra, Michael [1 ]
Surprenant, Sunny [5 ]
Chan, Wui Yarn Daphne [5 ]
Kumar, Swarun [4 ]
Bockstaller, Michael R. [3 ]
Matyjaszewski, Krzysztof [2 ]
Majidi, Carmel [1 ]
机构
[1] Carnegie Mellon Univ, Dept Mech Engn, Pittsburgh, PA 15213 USA
[2] Carnegie Mellon Univ, Dept Chem, Pittsburgh, PA 15213 USA
[3] Carnegie Mellon Univ, Dept Mat Sci & Engn, Pittsburgh, PA 15213 USA
[4] Carnegie Mellon Univ, Dept Elect & Comp Engn, Pittsburgh, PA 15213 USA
[5] Carnegie Mellon Univ, Dept Chem Engn, Pittsburgh, PA 15213 USA
基金
美国国家科学基金会; 瑞士国家科学基金会;
关键词
fluoroelastomers; high temperature; liquid metal composites; soft multifunctional materials; soft robotics; thermal stability; COMPOSITES;
D O I
10.1002/adfm.202309725
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Liquid-metal embedded elastomers (LMEEs) have been demonstrated to show a variety of excellent properties, including high toughness, dielectric constant, and thermal conductivity, with applications across soft electronics and robotics. However, within this scope of use cases, operation in extreme environments - such as high-temperature conditions - may lead to material degradation. While prior works highlight the functionality of LMEEs, there is limited insight on the thermal stability of these soft materials and how the effects of liquid metal (LM) inclusions depend on temperature. Here, the effects on thermal stability, including mechanical and electrical properties, of LMEEs are introduced. Effects are characterized for both fluoroelastomer and other elastomer-based composites at temperature exposures up to 325 degrees C, where it is shown that embedding LM can offer improvements in thermo-mechanical stability. Compared to elastomer like silicone rubber that has been previously used for LMEEs, a fluoroelastomer matrix offers a higher dielectric constant and significant improvement in thermo-mechanical stability without sacrificing room temperature properties, such as thermal conductivity and modulus. Fluoroelastomer-LM composites offer a promising soft, multi-functional material for high-temperature applications, which is demonstrated here with a printed, soft heat sink and an endoscopic sensor capable of wireless sensing of high temperatures. The thermo-mechanical stability of liquid metal-elastomer composites are studied and liquid metal is shown to enhance thermo-mechanical stability by toughening soft materials at high temperatures. A highly thermally stable composite is introduced where the material maintains rubber-like properties up to 325 degrees C. These thermally stable, multi-functional materials may enable soft robotics for extreme environments, including in high-temperature conditions and space applications.image
引用
收藏
页数:13
相关论文
共 50 条
[31]   Strongly solvating triglyme-based electrolyte realizes stable lithium metal batteries at high-voltage and high-temperature [J].
Hu, Guolin ;
Yang, Zhanlin ;
Zhang, Xiangxin ;
Liu, Yongchuan ;
Lin, Yuansheng ;
Chen, Sujing ;
Chen, Yuanqiang ;
Sa, Baisheng ;
Zhang, Yining .
ENERGY STORAGE MATERIALS, 2024, 69
[32]   High-temperature thermal stable solar selective absorbing coating based on the dielectric-metal-dielectric structure [J].
Ren, Jie ;
Liang, Dongdong ;
Liu, Huan ;
Yang, Yingxin ;
Li, Aoyu ;
Sun, Ying ;
Wang, Cong .
MATERIALS TODAY PHYSICS, 2023, 34
[33]   Stable High-Temperature Lithium-Metal Batteries Enabled by Strong Multiple Ion-Dipole Interactions [J].
Chen, Tao ;
Jin, Zhekai ;
Liu, Yuncong ;
Zhang, Xueqiang ;
Wu, Haiping ;
Li, Mengxue ;
Feng, WenWen ;
Zhang, Qiang ;
Wang, Chao .
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, 2022, 61 (35)
[34]   Anti-adhesion effects of liquid-infused textured surfaces on high-temperature stainless steel for soft tissue [J].
Zhang, Pengfei ;
Chen, Huawei ;
Zhang, Liwen ;
Zhang, Deyuan .
APPLIED SURFACE SCIENCE, 2016, 385 :249-256
[35]   Numerical study of a high-temperature thermal energy storage system with metal and inorganic salts as phase change materials [J].
Wang, Gang ;
Fan, Jianhua ;
Liao, Zhirong ;
Xu, Chao ;
Wei, Gaosheng ;
Kong, Weiqiang ;
Furbo, Simon .
JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY, 2021, 13 (04)
[36]   Fabrication and Applications of Ceramic-Based Nanofiber Materials Service in High-Temperature Harsh Conditions-A Review [J].
Zhang, Jing ;
Zhang, Xi ;
Wang, Lifeng ;
Zhang, Junxiong ;
Liu, Rong ;
Sun, Qilong ;
Ye, Xinli ;
Ma, Xiaomin .
GELS, 2023, 9 (03)
[37]   Materials process and applications of single grain (RE)-Ba-Cu-O bulk high-temperature superconductors [J].
Li, Beizhan ;
Zhou, Difan ;
Xu, Kun ;
Hara, Shogo ;
Tsuzuki, Keita ;
Miki, Motohiro ;
Felder, Brice ;
Deng, Zigang ;
Izumi, Mitsuru .
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2012, 482 :50-57
[38]   High-temperature measurement using Cu-plating fiber Bragg grating for metal smart structure applications [J].
Chang, Tianying ;
Jia, Lei ;
Sui, Qingmei ;
Cui, Hong-Liang .
SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2014, 2014, 9061
[39]   A Scalable Enhancement-Mode Junctionless SiC FET with Embedded P+ Pockets in the Oxide Layer for High-Temperature Applications [J].
Ratul Kumar Baruah ;
Bikram Kishore Mahajan ;
Sujay Routh .
Journal of Electronic Materials, 2023, 52 :1507-1517
[40]   A Scalable Enhancement-Mode Junctionless SiC FET with Embedded P+ Pockets in the Oxide Layer for High-Temperature Applications [J].
Baruah, Ratul Kumar ;
Mahajan, Bikram Kishore ;
Routh, Sujay .
JOURNAL OF ELECTRONIC MATERIALS, 2023, 52 (02) :1507-1517