Thermo-Mechanically Stable, Liquid Metal Embedded Soft Materials for High-Temperature Applications

被引:12
作者
Herbert, Robert [1 ]
Mocny, Piotr [2 ]
Zhao, Yuqi [3 ]
Lin, Ting-Chih [2 ]
Zhang, Junbo [4 ]
Vinciguerra, Michael [1 ]
Surprenant, Sunny [5 ]
Chan, Wui Yarn Daphne [5 ]
Kumar, Swarun [4 ]
Bockstaller, Michael R. [3 ]
Matyjaszewski, Krzysztof [2 ]
Majidi, Carmel [1 ]
机构
[1] Carnegie Mellon Univ, Dept Mech Engn, Pittsburgh, PA 15213 USA
[2] Carnegie Mellon Univ, Dept Chem, Pittsburgh, PA 15213 USA
[3] Carnegie Mellon Univ, Dept Mat Sci & Engn, Pittsburgh, PA 15213 USA
[4] Carnegie Mellon Univ, Dept Elect & Comp Engn, Pittsburgh, PA 15213 USA
[5] Carnegie Mellon Univ, Dept Chem Engn, Pittsburgh, PA 15213 USA
基金
美国国家科学基金会; 瑞士国家科学基金会;
关键词
fluoroelastomers; high temperature; liquid metal composites; soft multifunctional materials; soft robotics; thermal stability; COMPOSITES;
D O I
10.1002/adfm.202309725
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Liquid-metal embedded elastomers (LMEEs) have been demonstrated to show a variety of excellent properties, including high toughness, dielectric constant, and thermal conductivity, with applications across soft electronics and robotics. However, within this scope of use cases, operation in extreme environments - such as high-temperature conditions - may lead to material degradation. While prior works highlight the functionality of LMEEs, there is limited insight on the thermal stability of these soft materials and how the effects of liquid metal (LM) inclusions depend on temperature. Here, the effects on thermal stability, including mechanical and electrical properties, of LMEEs are introduced. Effects are characterized for both fluoroelastomer and other elastomer-based composites at temperature exposures up to 325 degrees C, where it is shown that embedding LM can offer improvements in thermo-mechanical stability. Compared to elastomer like silicone rubber that has been previously used for LMEEs, a fluoroelastomer matrix offers a higher dielectric constant and significant improvement in thermo-mechanical stability without sacrificing room temperature properties, such as thermal conductivity and modulus. Fluoroelastomer-LM composites offer a promising soft, multi-functional material for high-temperature applications, which is demonstrated here with a printed, soft heat sink and an endoscopic sensor capable of wireless sensing of high temperatures. The thermo-mechanical stability of liquid metal-elastomer composites are studied and liquid metal is shown to enhance thermo-mechanical stability by toughening soft materials at high temperatures. A highly thermally stable composite is introduced where the material maintains rubber-like properties up to 325 degrees C. These thermally stable, multi-functional materials may enable soft robotics for extreme environments, including in high-temperature conditions and space applications.image
引用
收藏
页数:13
相关论文
共 50 条
[1]   Magnetically soft nanomaterials for high-temperature applications [J].
Kulik, Tadeusz ;
Ferenc, Jaroslaw ;
Kolano-Burian, Aleksandra ;
Liang, XiuBing ;
Kowalczyk, Maciej .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 :397-400
[2]   High-temperature fatigue crack growth resistance of thermo-mechanically and heat treated cast Ti-Si-Al-Zr composites [J].
Vasyliv, B ;
Ivasyshyn, A ;
Ostash, O ;
Firstov, S ;
Mazur, V ;
Kuzmenko, M ;
Kapustnikova, S .
METALLIC MATERIALS WITH HIGH STRUCTURAL EFFICIENCY, 2004, 146 :235-240
[3]   Metal oxide aerogels for high-temperature applications [J].
Wu, Yu ;
Wang, Xiaodong ;
Shen, Jun .
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2023, 106 (02) :360-380
[4]   Metal oxide aerogels for high-temperature applications [J].
Yu Wu ;
Xiaodong Wang ;
Jun Shen .
Journal of Sol-Gel Science and Technology, 2023, 106 :360-380
[5]   Liquid Metal Based Soft Robotics: Materials, Designs, and Applications [J].
Wang, Xuelin ;
Guo, Rui ;
Liu, Jing .
ADVANCED MATERIALS TECHNOLOGIES, 2019, 4 (02)
[6]   A perspective on investigating transition metal high-entropy alloys for high-temperature applications [J].
Li, Meifeng ;
Zhang, Hao ;
Zeng, Yimin ;
Liu, Jing .
ACTA MATERIALIA, 2022, 240
[7]   Determination of thermo-physical properties and stability testing of high-temperature phase-change materials for CSP applications [J].
Liu, Ming ;
Gomez, J. C. ;
Turchi, C. S. ;
Tay, N. H. S. ;
Saman, W. ;
Bruno, F. .
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2015, 139 :81-87
[8]   Selective emitter materials and designs for high-temperature thermophotovoltaic applications [J].
Wang, Ze ;
Kortge, David ;
He, Zihao ;
Song, Jiawei ;
Zhu, Jie ;
Lee, Changkyun ;
Wang, Haiyan ;
Bermel, Peter .
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2022, 238
[9]   Materials for Electric Machines Suited for High-Temperature Applications: a Survey [J].
Vannini, Amedeo ;
Marfoli, Alessandro ;
Papini, Luca ;
Bolognesi, Paolo ;
Gerada, Christopher .
2021 IEEE WORKSHOP ON ELECTRICAL MACHINES DESIGN, CONTROL AND DIAGNOSIS (WEMDCD), 2021, :101-106
[10]   Magnetic properties and stability of magnetically soft nanomaterials for high-temperature applications [J].
Kulik, T ;
Ferenc, J ;
Kolano-Burian, A ;
Kowalczyk, M .
ISMANAM 2003: METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, 2004, 20-21 :747-752