Optimization of Cobalt Chrome 3D re-entrant Auxetics fabricated using Selective Laser Melting

被引:12
|
作者
Singh, Daljeet [1 ]
Tobin, Daniel [2 ]
Dowling, Luke [2 ]
Trimble, Daniel [2 ]
机构
[1] Thapar Inst Engn & Technol, Dept Mech Engn, Patiala 147004, India
[2] Trinity Coll Dublin, Dept Mech & Mfg Engn, Dublin, Ireland
关键词
Re-entrant Auxetics; 3D printing; Selective Laser Melting; Cobalt Chrome; Digital Image Correlation; Design of Experiments; Optimization; MECHANICAL-PROPERTIES; HONEYCOMB; BEHAVIOR; ELASTICITY; FOAM;
D O I
10.1016/j.engstruct.2022.115542
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
An approach to study the effect of geometric parameters on the Poisson's ratio of a three-dimensional re-entrant Cobalt Chrome Auxetic structure has been presented. The Auxetic mechanical structure has been realized with the help of Additive Manufacturing. The mechanical properties and Poisson's ratio of the physical samples were determined using compression testing and Digital Image Correlation (DIC). A Finite Element model is used to estimate the Poisson's ratio numerically. A Design of Experiments (DOE) and Finite Element Analysis (FEA) based optimization study is further performed in order to investigate the effects of the different geometric parameters on the Poisson's ratio of the Auxetic samples. The DOE model is used to determine the values of the parameters for an optimal performance of the samples in terms of the observed Auxetic behaviour.
引用
收藏
页数:15
相关论文
共 50 条
  • [31] Blast mitigation using polymeric 3D printed auxetic re-entrant honeycomb structures: A preliminary study
    Critchley, Richard
    Hazael, Rachael
    Bhatti, Kamran
    Wood, David
    Peare, Alan
    Johnson, Stephen
    Temple, Tracey
    INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES, 2022, 13 (03) : 469 - 486
  • [32] Machinability of 3D printed metallic materials fabricated by selective laser melting and electron beam melting: A review
    Ucak, Necati
    cicek, Adem
    Aslantas, Kubilay
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 80 : 414 - 457
  • [33] Mechanical and bandgap properties of 3D bi-material triangle re-entrant honeycomb
    Liu, Kang-Jia
    Liu, Hai -Tao
    Zhen, Dong
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2024, 261
  • [34] 3D printed re-entrant cavity resonator for complex permittivity measurement of crude oils
    Mohammed, Ali M.
    Hart, Abarasi
    Wood, Joe
    Wang, Yi
    Lancaster, Michael J.
    SENSORS AND ACTUATORS A-PHYSICAL, 2021, 317
  • [35] Analytical solution and finite element approach to the 3D re-entrant structures of auxetic materials
    Rad, Mozafar Shokri
    Prawoto, Yunan
    Ahmad, Zaini
    MECHANICS OF MATERIALS, 2014, 74 : 76 - 87
  • [36] Effect of damage evolution on the auxetic behavior of 2D and 3D re-entrant type geometries
    Srivastava, Chetna
    Mahesh, Vinyas
    Guruprasad, P. J.
    Petrinic, Nik
    Scarpa, Fabrizio
    Harursampath, Dineshkumar
    Ponnusami, Sathiskumar A.
    MECHANICS OF MATERIALS, 2024, 193
  • [37] Multi-objective crashworthiness optimization for a newly developed 3D re-entrant auxetic structure using response surface method and MOPSO algorithm
    Lotfi, Majid
    Masoumi, Abolfazl
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2024,
  • [38] Study of Mechanical Properties of a New 3D Re-Entrant Lattice Auxetic Structure Under Bending
    Shen, Jianbang
    Zeng, Qinglei
    Wang, Jing
    Ge, Jingran
    Gao, Fuchao
    Liang, Jun
    ADVANCED ENGINEERING MATERIALS, 2023, 25 (14)
  • [39] Low velocity impact performance of 3D auxetic composites embedded with re-entrant triangle inclusions
    Zhang, Minglonghai
    Ho, Mabel Mei Po
    Hu, Hong
    POLYMER COMPOSITES, 2023, 44 (08) : 5070 - 5086
  • [40] Quasi-static crushing response of a novel 3D re-entrant circular auxetic metamaterial
    Jiang, Feng
    Yang, Shu
    Qi, Chang
    COMPOSITE STRUCTURES, 2022, 300