Surface properties of clinker phases and clay minerals characterized by inverse gas chromatography (IGC) and their link to reactivity

被引：4

作者：

Zunino, Franco ^{[1
,2
]}

Palacios, Marta ^{[3
]}

Bowen, Paul ^{[1
]}

Scrivener, Karen ^{[1
]}

机构：

[1] Ecole Polytech Fed Lausanne, Lab Construct Mat LMC, STI, IMX, Stn 12, CH-1015 Lausanne, Switzerland

[2] Swiss Fed Inst Technol, Inst Bldg Mat IfB, Phys Chem Bldg Mat, CH-8093 Zurich, Switzerland

[3] CSIC, Eduardo Torroja Inst Construct Sci IETcc, Madrid, Spain

来源：

CEMENT AND CONCRETE RESEARCH | 2024年 / 178卷

基金：

瑞士国家科学基金会;

关键词：

Inverse gas chromatography (IGC); B surface layer; A reactivity; DCa3SiO5(C3S); Clay minerals; HYDRATION; ADSORPTION; ENERGY; HETEROGENEITY; CHEMISTRY; SILICATE; KINETICS; INSIGHT;

D O I：

10.1016/j.cemconres.2024.107458

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This paper presents a preliminary study of the characterization of the surface energy properties of clinker phases (C3S and C3A), kaolin and metakaolin by Inverse Gas Chromatography (IGC). For this, a reliable measurement methodology was developed. By looking at changes in the whole series of results (dispersive surface energy, specific polar interaction parameter, acid and base constants, morphology index, nanoroughness and adsorption energy distribution function), it is possible to discern changes between the same powders with different surface treatments. A promising correlation between surface properties and the reactivity of studied materials have been found. However, based on the IGC characterization, the increased reactivity of metakaolin compared to the raw kaolinite seems to be strongly linked to the change in local order rather than significant changes in the surface energetics, although a change in the acid/base nature of the surface has been observed.

引用

页数：10

共 35 条

[1] Abbot S., IGC Science: Principles and Practice
[2] ASTM International, 2020, C 1897-20, DOI [10.1520/C1897-20.2, DOI 10.1520/C1897-20.2]
[3] Estimation of the surface energetic heterogeneity of a solid by inverse gas chromatography
Balard, H
[J]. LANGMUIR, 1997, 13 (05) : 1260 - 1269
[4] Impact of Annealing on the Early Hydration of Tricalcium Silicate
Bazzoni, Amelie
Cantoni, Marco
Scrivener, Karen L.
[J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2014, 97 (02) : 584 - 591
[5] Surface dispersive energy determined with IGC-ID in anti-graffiti-coated building materials
Carmona-Quiroga, P. M.
Rubio, J.
Sanchez, M. J.
Martinez-Ramirez, S.
Blanco-Varela, M. T.
[J]. PROGRESS IN ORGANIC COATINGS, 2011, 71 (03) : 207 - 212
[6] Coupling of inverse gas chromatography at infinite dilution (IGC-ID) with a controlled modification of a solid surface
Comard, MP
Calvet, R
Dodds, JA
Balard, H
[J]. JOURNAL OF CHROMATOGRAPHY A, 2002, 969 (1-2) : 93 - 96
[7] Interfacial chemistry of epoxy adhesives on hydrated cement paste
Djouani, Fatma
Connan, Carole
Chehimi, Mohamed M.
Benzarti, Karim
[J]. SURFACE AND INTERFACE ANALYSIS, 2008, 40 (3-4) : 146 - 150
[8] Cement paste-epoxy adhesive interactions
Djouani, Fatma
Connan, Carole
Delamar, Michel
Chehimi, Mohamed M.
Benzarti, Karim
[J]. CONSTRUCTION AND BUILDING MATERIALS, 2011, 25 (02) : 411 - 423
[9] Why alite stops hydrating below 80% relative humidity
Flatt, Robert J.
Scherer, George W.
Bullard, Jeffrey W.
[J]. CEMENT AND CONCRETE RESEARCH, 2011, 41 (09) : 987 - 992
[10] An insight into the surface properties of calcined kaolinitic clays: The grinding effect
Gamelas, J. A. F.
Ferraz, E.
Rocha, F.
[J]. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2014, 455 : 49 - 57

← 1 2 3 4 →