Life Cycle Environmental Impact Assessment and Applicability of Synthetic Resin Formwork

被引：1

作者：

Nam, Kyung-Yong ^{[1
]}

Lim, Myung-Kwan ^{[2
]}

机构：

[1] Taeyoung E&C Co Ltd, Engn & Construct Grp, Architectural Technol Team, Seoul 07241, South Korea

[2] Univ Ulsan, Dept Architecture Engn, Ulsan 44610, South Korea

来源：

MATERIALS | 2023年 / 16卷 / 02期

关键词：

synthetic resin formwork; Euro form; environmental impact; life cycle assessment; CO2; emissions; BUILDINGS; SELECTION; MODEL;

D O I：

10.3390/ma16020696

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

In this study, the environmental impacts of the production and field application of synthetic resin formwork were quantitatively compared to the Euro form. The noise test results showed an average of 107.3 dB (A) for the Euro form and 99.7 dB (A) for the synthetic resin formwork. Additionally, when the number of uses was considered, the CO2 emissions from the synthetic resin formwork were approximately 32% lower than the Euro form. Based on these results, it is expected that the use of synthetic resin formwork will reduce material production by half and reduce CO2 emissions compared to channel formwork.

引用

页数：17

共 50 条

[21] Assessing the environmental impact of data centres part 2: Building environmental assessment methods and life cycle assessment
Whitehead, Beth
Andrews, Deborah
Shah, Amip
Maidment, Graeme
BUILDING AND ENVIRONMENT, 2015, 93 : 395 - 405
[22] How can life cycle thinking support sustainability of buildings? Investigating life cycle assessment applications for energy efficiency and environmental performance
Ingrao, Carlo
Messineo, Antonio
Beltramo, Riccardo
Yigitcanlar, Tan
Ioppolo, Giuseppe
JOURNAL OF CLEANER PRODUCTION, 2018, 201 : 556 - 569
[23] Research Progress on Environmental Impact and Life Cycle Assessment of Additive Manufacturing Technology
Li Z.
Zhu J.
Li H.
Cailiao Daobao/Materials Reports, 2021, 35 (11): : 11173 - 11178
[24] Regionalized environmental damages and life cycle cost of chickpea production using LC-IMPACT assessment
Nabavi-Pelesaraei, Ashkan
Damgaard, Anders
ENVIRONMENTAL IMPACT ASSESSMENT REVIEW, 2023, 103
[25] Life cycle impact assessment of the environmental infrastructures in operation phase: Case of an industrial waste incineration plant
Kim, Hyeong-Woo
Kim, Kyeong-Ho
Park, Hung-Suck
ENVIRONMENTAL ENGINEERING RESEARCH, 2017, 22 (03) : 266 - 276
[26] Environmental impact of two aerobic composting technologies using life cycle assessment
Cadena, Erasmo
Colon, Joan
Artola, Adriana
Sanchez, Antoni
Font, Xavier
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT, 2009, 14 (05) : 401 - 410
[27] Environmental impact assessment of red mud utilization in concrete production: a life cycle assessment study
Morsali, Saeed
Yildirim, Feriha
ENVIRONMENT DEVELOPMENT AND SUSTAINABILITY, 2024, 26 (05) : 12219 - 12238
[28] Environmental impact assessment of red mud utilization in concrete production: a life cycle assessment study
Saeed Morsali
Feriha Yildirim
Environment, Development and Sustainability, 2024, 26 : 12219 - 12238
[29] Environmental impact of desalination: A systematic review of Life Cycle Assessment
Lee, Kyungsun
Jepson, Wendy
DESALINATION, 2021, 509
[30] Effect of Material Selection on the Life Cycle Assessment of Environmental Impact
Ng, C. Y.
Chuah, K. B.
MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8, 2012, 383-390 : 3387 - 3394

← 1 2 3 4 5 →