Analysis Methods of Irregular High-Rise Buildings Subjected to Seismic Loads

被引:6
作者
Intekhab, Md Shahzar [1 ]
Das, Swagato [2 ]
Jajnery, M. Ahmad [1 ]
Akhtar, Salman [1 ]
Sahoo, Debarshi [1 ]
Saha, Purnachandra [1 ]
机构
[1] KIIT Deemed Univ, Sch Civil Engn, Bhubaneswar, Odisha, India
[2] CV Raman Global Univ, Dept Civil Engn, Bhubaneswar, Odisha, India
基金
美国国家科学基金会;
关键词
Seismic Load; Irregular Structures; Non-linear analysis; INCREMENTAL DYNAMIC-ANALYSIS; PUSHOVER ANALYSIS PROCEDURE; ENDURANCE TIME METHOD; STEEL FRAMES; PERFORMANCE ASSESSMENT; STATIC PUSHOVER; HIGHER MODES; N2; METHOD; CONCRETE; DESIGN;
D O I
10.1007/s42417-022-00636-3
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Background Seismic analysis of structures is required for the design of high-rise building as these are hazards that threat the built environment and human life. However, it was observed that most of the high-rise structures show irregularities in form of mass, stiffness, strength, plan, etc. The irregularities occur due to the architectural designs, non-orthogonal placement of columns, irregular placement of mass in structure, etc. The researchers observed that the irregular structures could not be analysed using the regular methods as given in the design codes as the codes consider the regular structures. Methods Therefore, different methods were developed for analysis of seismic irregularities. The methods for analysing irregular structures under the seismic loads are static methods such as equivalent lateral force method and pushover analysis, and dynamic methods such as Response Spectrum Analysis and Time History Method. Results From the study, it was observed that the non-linear time history analysis, increment dynamic analysis, considers several intensity of ground vibrations to perform nonlinear analysis. Therefore, the method performs well against the other analytical techniques as all the scaled ground motions are recorded to predict the damage due to earthquake. Conclusion Though the method requires high precision, due to high ground vibration sensitivity, and is costly, it shows high accuracy and efficiency.
引用
收藏
页码:1359 / 1382
页数:24
相关论文
共 50 条
[41]   DYNAMIC BEHAVIOR OF A HIGH-RISE BUILDING UNDER SEISMIC LOADS FOR DIFFERENT BEARING FRAME TYPES [J].
Sakharov, Volodymyr ;
Lytvyn, Oleksandr ;
Pidlutskyi, Vasyl .
CIVIL AND ENVIRONMENTAL ENGINEERING REPORTS, 2018, 28 (04) :180-189
[42]   Seismic performance of precast concrete walls with replaceable steel slit connections for high-rise buildings [J].
Naserpour, Afshin ;
Ghanbari, Mohammad Ali ;
Haseli, Behzad .
INNOVATIVE INFRASTRUCTURE SOLUTIONS, 2024, 9 (02)
[43]   Advances in seismic assessment of steel-concrete composite high-rise buildings and engineering practices [J].
Qian, J. ;
Zhou, Z. ;
Wu, X. H. .
RECENT PROGRESS IN STEEL AND COMPOSITE STRUCTURES, 2016, :17-28
[44]   Seismic responses of super high-rise buildings under long-period ground motions [J].
Zhang, Zi-Hang ;
Li, Qiu-Sheng .
ENGINEERING STRUCTURES, 2023, 294
[45]   Drift optimization of high-rise buildings in earthquake zones [J].
Al-Ansari, Mohammed ;
Senouci, Ahmed .
STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS, 2011, 20 (02) :208-222
[46]   Time, Cost, and Energy Consumption Analysis on Construction Optimization in High-Rise Buildings [J].
He, Wei ;
Li, Wenjing ;
Xu, Shan ;
Wang, Wei ;
An, Xu .
JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT, 2021, 147 (10)
[47]   Fire fighting in high-rise buildings: the role for engineers [J].
Lo, Shane Siu-hang .
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-CIVIL ENGINEERING, 2010, 163 (06) :20-26
[48]   Pumping lightweight aggregate concrete into high-rise buildings [J].
Wang, Qing ;
Pan, Cong ;
Liang, Yuhang ;
Gan, Wei ;
Ho, Johnny .
JOURNAL OF BUILDING ENGINEERING, 2023, 80
[49]   Talk about Structural Design of High-rise Buildings [J].
Zhu, Xuping ;
Li, Juwen .
MECHATRONICS AND INTELLIGENT MATERIALS II, PTS 1-6, 2012, 490-495 :2632-2635
[50]   Briefing: Modular integrated construction for high-rise buildings [J].
Pan, Wei ;
Hon, Chi Keung .
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-MUNICIPAL ENGINEER, 2020, 173 (02) :64-68