Competitive effect of residual stress and surface roughness on the fatigue life of shot peened S42200 steel at room and elevated temperature

被引：38
|
作者：
Fan, Kaifa [1 ,2 ]
Liu, Daoxin [1 ]
Liu, Yanjie [1 ]
Wu, Junnan [1 ]
Shi, Hailan [1 ]
Zhang, Xiaohua [1 ]
Zhou, Kai [1 ]
Xiang, Junfeng [1 ]
Wahab, Magd Abdel [2 ]
机构：
[1] Northwestern Polytech Univ, Sch Civil Aviat, Corros & Protect Res Lab, Xian, Peoples R China
[2] Univ Ghent, Fac Engn & Architecture, Soete Lab, Ghent, Belgium
来源：
TRIBOLOGY INTERNATIONAL | 2023年 / 183卷
基金：
中国国家自然科学基金;
关键词：
Shot peening; Compressive residual stress; Stress intensity factor; Finite element model; Fatigue; PEENING PARAMETERS; STAINLESS-STEEL; MESHFREE METHOD; RELAXATION; ALLOY; TI-6AL-4V; STRENGTH; MICROSTRUCTURE; PARTICLES; INTEGRITY;
D O I：
10.1016/j.triboint.2023.108422
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The effect of shot peening (SP) on the fatigue life of S42200 steel at room and elevated temperature is investigated. The fatigue test is carried out on a high temperature rotating bending tester. Surface integrity characterization is used to study the effect of SP on surface properties. Furthermore, Finite Element Method (FEM) combined with a fatigue damage model, namely Zheng Equation, is proposed to predict the fatigue life. The results show that SP effectively improves the fatigue life of S42200 steel under all temperatures. However, at lower temperature, higher strength SP leads to higher fatigue resistance, while at higher temperature, lower strength SP leads to higher fatigue resistance. This can be explained by the competitive effect of surface roughness and compressive residual stress (CRS) relaxation on the local stress concentration. This research can be a good guide to the application of SP at different temperatures.
引用
收藏
页数：9
相关论文
共 50 条
  • [31] Residual Stress Relaxation of Shot-Peened Deformation Surface Layer on Duplex Stainless Steel Under Applied Loading
    Qiang Feng
    Chuanhai Jiang
    Zhou Xu
    Journal of Materials Engineering and Performance, 2014, 23 : 408 - 412
  • [32] Simulation and experimental validation of residual stress and surface roughness of high manganese steel after shot peening
    Chen, Hongtang
    Wang, Shouren
    Lu, Sufen
    Qiao, Yang
    Wang, Xiangyu
    Fan, Ning
    Guo, Peiquan
    Niu, Jintao
    4TH CIRP CONFERENCE ON SURFACE INTEGRITY (CSI 2018), 2018, 71 : 227 - 231
  • [33] Fatigue probability model for AWJ-cut steel including surface roughness and residual stress
    Hultgren, Gustav
    Mansour, Rami
    Barsoum, Zuheir
    Olsson, Marten
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2021, 179
  • [34] The Effect of Shot Peening on Residual Stress and Surface Roughness of AMS 5504 Stainless Steel Joints Welded Using the TIG Method
    Bucior, Magdalena
    Kluz, Rafal
    Trzepiecinski, Tomasz
    Jurczak, Kamil
    Kubit, Andrzej
    Ochal, Kamil
    MATERIALS, 2022, 15 (24)
  • [35] Residual stress relaxation and low- and high-cycle fatigue behavior of shot-peened medium-carbon steel
    Kim, Jong-Cheon
    Cheong, Seong-Kyun
    Noguchi, Hiroshi
    INTERNATIONAL JOURNAL OF FATIGUE, 2013, 56 : 114 - 122
  • [36] Shot peening effects on fatigue life, corrosion behavior and surface roughness of a low carbon alloy, steel
    Prabhu, C. Selva Senthil
    Varthanan, P. Ashok
    Ramkumar, T.
    BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 2021, 69 (01)
  • [37] Fatigue life prediction model for shot-peened laser powder bed fused 304L steel considering residual stress relaxation and defect distribution
    Cao, Shujie
    Zhang, Hongzhuang
    Hu, Jiexin
    Li, Changyou
    Li, Bing
    ENGINEERING FAILURE ANALYSIS, 2024, 162
  • [38] The Effect of Baking Heat Treatment on the Fatigue Strength and Life of Shot Peened 4340M Landing Gear Steel
    Ahn, Seok-Hwan
    Heo, Jongman
    Kim, Jungsik
    Hwang, Hyeongseob
    Cho, In-Sik
    MATERIALS, 2020, 13 (24) : 1 - 11
  • [39] Stress relaxation behavior of shot-peened Ti-6Al-4V under fretting fatigue at elevated temperature
    Lee, H
    Mall, S
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 366 (02): : 412 - 420
  • [40] Effect of thermal relaxation on residual stress and microstructure in the near-surface layers of dual shot peened Inconel 625
    Wu, Lihong
    Jiang, Chuanhai
    ADVANCES IN MECHANICAL ENGINEERING, 2018, 10 (10)
12345