Partial austenitisation and TBF steel composed of ferrite, bainitic ferrite, and austenite

被引：2

作者：

Erisir, Ersoy ^{[1
]}

Bilir, Oguz Gurkan ^{[1
]}

Sozer, Yunus Emre ^{[2
]}

Ararat, Ozge ^{[1
]}

Davut, Kemal ^{[3
]}

机构：

[1] Kocaeli Univ, Dept Met & Mat Engn, Kocaeli, Turkey

[2] Erdemir, Eregli Demir & Celik Fabrikalari TAS, Zonguldak, Turkey

[3] Izmir Inst Technol, Mat Sci & Engn Dept, Urla Izmir, Turkey

来源：

MATERIALS SCIENCE AND TECHNOLOGY | 2023年 / 39卷 / 01期

关键词：

TBF steels; partial austenitisation; phase transformations; microstructural characterisation; mechanical properties; MECHANICAL-PROPERTIES; STRENGTH; MICROSTRUCTURE; MARTENSITE; FORMABILITY; DUCTILITY; EBSD; NB; ALUMINUM;

D O I：

10.1080/02670836.2022.2102289

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A TRIP-aided bainitic-ferritic (TBF) steel with a chemical composition of Fe-0.19C-1.7Mn-1.09Si-0.51Al-0.05Nb (wt-%) was partially austenitised from a hot-rolled martensitic initial microstructure. After the hot rolling, the martensitic specimens were reheated to different intercritical temperatures and then austempered at 350 degrees C. Thus, the effect of the initial microstructure of TBF steel on intercritical austenite formation during partial austenitisation was studied. The microstructures were investigated by scanning electron microscopy and electron backscatter diffraction (EBSD), and the tensile properties were tested. Microstructural observations revealed that a final microstructure of fine ferrite, bainitic ferrite, and retained austenite can be obtained. The steel partial austenitised at 770 degrees C showed a good combination of ultimate tensile strength and total elongation.

引用

页码：105 / 116

页数：12

共 50 条

[1] Transformation of austenite into bainitic ferrite and martensite
Vetters, H
STEEL RESEARCH, 1996, 67 (10): : 408 - 411
[2] FORMATION OF AUSTENITE FROM A MIXTURE OF BAINITIC FERRITE AND AUSTENITE
YANG, JR
HUANG, CY
MATERIALS CHEMISTRY AND PHYSICS, 1993, 35 (02) : 168 - 175
[3] Tempering of hard mixture of bainitic ferrite and austenite
Garcia-Mateo, C
Peet, M
Caballero, FG
Bhadeshia, HKDH
MATERIALS SCIENCE AND TECHNOLOGY, 2004, 20 (07) : 814 - 818
[4] Fine microstructure of bainitic ferrite in bainitic steel
Li, FZ
Ao, Q
Qin, C
Jiang, J
Liu, YX
Meng, XM
He, LL
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2003, 10 (02) : 27 - 29
[5] Fine Microstructure of Bainitic Ferrite in Bainitic Steel
LI Feng-zhao
AO Qing
QIN Chao
JIANG Jiang
LIU Yu-xian
MENG Xiang-min
HE Lian-long
JournalofIronandSteelResearch(International), 2003, 10 (02) : 27 - 29
[6] Correction of Nucleation and Growth of Bainitic Ferrite to the State of Austenite - 2. Nucleation of Bainitic Ferrite.
Cizek, Milan
Freiwillig, Rudolf
Kurdman, Jiri
1600, (11):
[7] The nanohardness of acicular ferrite and bainitic ferrite in low carbon microalloying steel
Shang, C. J.
Liang, X.
Wang, X. M.
He, X. L.
Liu, H.
PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3, 2007, 561-565 : 65 - 68
[8] DYNAMIC RECRYSTALLIZATION IN STAINLESS-STEEL OF FERRITE, AUSTENITE AND AUSTENITE-FERRITE TYPES
ZARIPOVA, RG
KAYBYSHEV, OA
SALISHCHEV, GA
FIZIKA METALLOV I METALLOVEDENIE, 1992, (04): : 132 - 141
[9] NITROGEN AND CARBON REDISTRIBUTIONS IN FERRITE AUSTENITE AND AUSTENITE FERRITE STEEL WELDED-JOINTS
PILOUS, V
STRANSKY, K
KUCERA, J
MILLION, B
DRYBCAK, P
REK, A
KOVOVE MATERIALY-METALLIC MATERIALS, 1991, 29 (01): : 31 - 56
[10] Characteristics of retained austenite in TRIP steels with bainitic ferrite matrix
Mingya Zhang
Fuxian Zhu
Zhengtao Duan
Shicheng Ma
Journal of Wuhan University of Technology-Mater. Sci. Ed., 2011, 26 : 1148 - 1151

← 1 2 3 4 5 →