Creep Properties of Shale and Predicted Impact on Proppant Embedment for the Caney Shale, Oklahoma

被引:13
作者
Benge, Margaret [1 ]
Katende, Allan [2 ]
Rutqvist, Jonny [3 ]
Radonjic, Mileva [2 ,4 ]
Bunger, Andrew [1 ,5 ]
机构
[1] Univ Pittsburgh, Dept Civil & Environm Engn, Pittsburgh, PA 15260 USA
[2] Oklahoma State Univ, Dept Chem Engn, Stillwater, OK USA
[3] Lawrence Berkeley Natl Lab, Energy Geosci Div, Berkeley, CA USA
[4] Oklahoma State Univ, Boone Pickens Sch Geol, Stillwater, OK USA
[5] Univ Pittsburgh, Dept Chem & Petr Engn, Pittsburgh, PA 15260 USA
基金
美国能源部; 美国安德鲁·梅隆基金会;
关键词
Shale; Creep; Modeling; Fracture closure; Proppant embedment;
D O I
10.1007/s00603-023-03362-8
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
The Caney shale is an emerging hydrocarbon play located in southwest Oklahoma, USA. Within the Caney shale exist facies which were initially dubbed "reservoir" and "ductile" based on evaluation of well logging data. While past work has shown the distinction of "brittle" and "ductile" is not mechanically justifiable according to formal definitions, the current work shows some important differences between nominally ductile and reservoir zones. First, the "ductile" zones are more clay rich and have textural differences which can be expected to lead to differences in mechanical properties. One important impact of these differences is observed in triaxial creep experiments showing the "ductile" zones are more prone to creep deformation. Numerical simulations predict the "reservoir" zones will experience very little proppant embedment due to creep deformation of hydraulic fractures around proppant particles. On the other hand, "ductile" zones can be expected to undergo creep-driven proppant embedment leading to loss of fracture aperture ranging up to 100% loss, depending upon the spatial density of the proppant distribution. Hence, this research shows the identification of nominally "ductile" zones from well logs, while a misnomer, can be useful in finding clay-rich, creep-prone zones which will be the most prone to proppant embedment and hence vulnerable to greater production decline over time.
引用
收藏
页码:5903 / 5921
页数:19
相关论文
共 32 条
[1]  
ASTM International, 2014, Designation D7012-14 standard test methods for compressive strength and elastic moduli of intact rock core specimens under varying states of stress and temperatures
[2]  
Awejori GA, 2021, 55 US ROCK EMCH GEOM
[3]   Integrated Experimental and Modeling Study of Geochemical Reactions of Simple Fracturing Fluids with Caney Shale [J].
Awejori, Gabriel Adua ;
Doughty, Christine ;
Xiong, Fengyang ;
Paronish, Thomas ;
Spycher, Nicholas ;
Radonjic, Mileva .
ENERGY & FUELS, 2022, 36 (17) :10064-10081
[4]   Improved understanding of proppant embedment behavior under reservoir conditions: A review study [J].
Bandara, K. M. A. S. ;
Ranjith, P. G. ;
Rathnaweera, T. D. .
POWDER TECHNOLOGY, 2019, 352 :170-192
[5]  
Benge M, 2020, 55 US ROCK MECH GEOM
[6]  
Benge M, 2021, UNC RES TECHN C URTE
[7]  
Cardott B.J., 2017, OKLAHOMA GEOLOGY NOT, V76, P21
[8]   FRACTURE GRADIENT PREDICTION AND ITS APPLICATION IN OILFIELD OPERATIONS [J].
EATON, BA .
JOURNAL OF PETROLEUM TECHNOLOGY, 1969, 21 (OCT) :1353-+
[9]  
Fadjarijanto A, 2018, OFFSHORE TECHNOLOGY
[10]   Patterns in complex hydraulic fractures observed by true-triaxial experiments and implications for proppant placement and stimulated reservoir volumes [J].
Frash, Luke P. ;
Hampton, Jesse ;
Gutierrez, Marte ;
Tutuncu, Azra ;
Carey, J. William ;
Hood, John ;
Mokhtari, Mehdi ;
Huang, Hai ;
Mattson, Earl .
JOURNAL OF PETROLEUM EXPLORATION AND PRODUCTION TECHNOLOGY, 2019, 9 (04) :2781-2792