共 45 条
Crystallization behavior and mechanical properties of mica-diopside based glass-ceramics from granite wastes with different SiO2/MgO ratio
被引:8
作者:
Xingtao Wang
[1
,2
]
Xiaokun Tian
[1
]
Xiaojin Peng
[3
,4
]
Chuanxiang Sun
[1
,2
]
Ya Qu
[1
]
Yunlong Yue
[1
,2
]
Junfeng Kang
[1
]
机构:
[1] Univ Jinan, Sch Mat Sci & Engn, Jinan 250000, Peoples R China
[2] Shandong Inst Ind Technol, Jinan 250000, Peoples R China
[3] Shandong Sinocera Create Tide New Mat High Tech C, Dongying 257000, Peoples R China
[4] Foshan Sanshui Create Tide Co Ltd, Foshan 528000, Peoples R China
基金:
中国国家自然科学基金;
关键词:
Glass-ceramics;
Crystallization behavior;
Microstructure;
Mechanical properties;
DIELECTRIC-PROPERTIES;
MICROSTRUCTURE;
MGO;
NUCLEATION;
KINETICS;
SYSTEM;
PHASE;
CAO;
SRO;
D O I:
10.1016/j.jnoncrysol.2023.122185
中图分类号:
TQ174 [陶瓷工业];
TB3 [工程材料学];
学科分类号:
0805 ;
080502 ;
摘要:
Mica-Diopside based glass-ceramics were generated by melting method from granite wastes. The effects of SiO2/MgO (S/M) molar ratios on crystallization behavior, microstructure and mechanical characteristics of glass-ceramics were investigated. The analysis indicated that with the increase of S/M, the glass transition temperature (T-g) increased. The higher heat treatment temperature facilitated the formation of Forsterite than Nepheline. With S/M ratio rising, diopside turned into the main crystal phase instead of Forsterite along with Tainiolite as the minor phase at 850 degrees C and 900 degrees C respectively. At 900 degrees C, the crystallinity of glass-ceramics dropped with S/M ratio increasing. Meanwhile, there were some columnar crystals interleaving with granular crystals, and the average size of crystals obviously decreased. After heated at 900 degrees C, their Vickers-hardness fell dramatically with S/M rising, while the fracture toughness increased initially followed by a decrease, reaching the largest value of 1.97 MPa center dot m(1/2) with the S/M ratio of 2.82.
引用
收藏
页数:7
相关论文