Equilibrium Position of a Particle in a Microchannel Flow of Newtonian and Power-Law Fluids with an Obstacle

被引:0
|
作者
Chen, Dongmei [1 ]
Lin, Jianzhong [1 ]
机构
[1] Zhejiang Univ, State Key Lab Fluid Power Transmiss & Control, Hangzhou 310027, Peoples R China
基金
中国国家自然科学基金;
关键词
particle migration; equilibrium position; microchannel flow; power-law fluid; numerical simulation; DISCRETIZED BOLTZMANN-EQUATION; PARTICULATE SUSPENSIONS; NUMERICAL SIMULATIONS; POISEUILLE FLOW; CHANNEL FLOW; MIGRATION; SEPARATION; MOTION; BODIES; MODEL;
D O I
10.3390/math11173700
中图分类号
O1 [数学];
学科分类号
0701 ; 070101 ;
摘要
The equilibrium position yep/H of a particle in a microchannel flow of Newtonian and power-law fluids with an obstacle is numerically studied using the lattice Boltzmann method in the range of the ratio of an obstacle to particle diameter 0.5 & LE; & beta; & LE; 2, fluid power-law index 0.4 & LE; n & LE; 1, Reynolds number 20 & LE; Re & LE; 60, and blockage ratio 0.15 & LE; k & LE; 0.3. Some results are validated by comparing them with the available results. The results showed that, when a particle migrates around an obstacle in the flow behind and near the obstacle, the particle with a different initial, y/H, migrates downstream in a different lateral position, yep/H, and the larger the value of & beta;, the closer the value of yep/H is to the centerline. Therefore, the value of yep/H can be controlled by changing & beta; in the wake zone of the obstacle. However, in the flow far downstream from the obstacle, the particle with a different initial y/H tends to have the same yep/H when n, Re and k are fixed, but the values of yep/H are different for different n, Re and k; i.e., the larger the values of n, Re and k, the closer the value of yep/H is to the centerline. The value of & beta; has no effect on the value of yep/H. In the flow far downstream from the obstacle, the flow distance required for the particle to reach yep/H increases with increasing & beta; and n but decreases with decreasing Re and k.
引用
收藏
页数:16
相关论文
共 50 条
  • [1] Hydrodynamics of Newtonian and power-law fluids in microchannel with superhydrophobic wall
    Vagner, S. A.
    Patlazhan, S. A.
    XXXI INTERNATIONAL CONFERENCE ON EQUATIONS OF STATE FOR MATTER (ELBRUS 2016), 2016, 774
  • [2] ELECTROOSMOTIC FLOW OF POWER-LAW FLUIDS IN A SLIT MICROCHANNEL
    Zhao, Cunlu
    Yang, Chun
    ICNMM 2009, PTS A-B, 2009, : 211 - 218
  • [3] Electroosmotic flows of non-Newtonian power-law fluids in a cylindrical microchannel
    Zhao, Cunlu
    Yang, Chun
    ELECTROPHORESIS, 2013, 34 (05) : 662 - 667
  • [4] Analysis of electroosmotic flow of power-law fluids in a slit microchannel
    Zhao, Cunlu
    Zholkovskij, Emilijk
    Masliyah, Jacob H.
    Yang, Chun
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2008, 326 (02) : 503 - 510
  • [5] Slippage effect on the oscillatory electroosmotic flow of power-law fluids in a microchannel
    Baños R.
    Arcos J.
    Bautista O.
    Méndez F.
    Defect and Diffusion Forum, 2020, 399 : 92 - 101
  • [6] Computational analysis of the flow of pseudoplastic power-law fluids in a microchannel plate
    Saeed Mortazavi
    ChineseJournalofChemicalEngineering, 2017, 25 (10) : 1360 - 1368
  • [7] FLOW OF POWER-LAW NON-NEWTONIAN FLUIDS IN CONCENTRIC ANNULI
    HANKS, RW
    LARSEN, KM
    INDUSTRIAL & ENGINEERING CHEMISTRY FUNDAMENTALS, 1979, 18 (01): : 33 - 35
  • [8] Inertial lift on a particle in a straight microchannel of Newtonian, power-law and Carreau-Yasuda fluids: A simulation study toward optimized particle separation
    Ghomsheh, Mehryar Jannesari
    Jafari, Azadeh
    Funfschilling, Denis
    JOURNAL OF NON-NEWTONIAN FLUID MECHANICS, 2023, 312
  • [9] Combined electroosmotically and pressure driven flow of power-law fluids in a slit microchannel
    Babaie, Ashkan
    Sadeghi, Arman
    Saidi, Mohammad Hassan
    JOURNAL OF NON-NEWTONIAN FLUID MECHANICS, 2011, 166 (14-15) : 792 - 798
  • [10] THERMALLY FULLY DEVELOPED ELECTROOSMOTIC FLOW OF POWER-LAW FLUIDS IN A CIRCULAR MICROCHANNEL
    Sun, Y-J
    Jian, Y-J
    Chang, L.
    Liu, Q-S
    JOURNAL OF MECHANICS, 2013, 29 (04) : 609 - 616