Effects of Sc and Be Microalloying Elements on Mechanical Properties of Al-Zn-Mg-Cu (Al7xxx) Alloy

被引：4

作者：

Won, Sung-Jae ^{[1
,2
]}

So, Hyeongsub ^{[1
,2
]}

Han, Jung-Woo ^{[1
,2
]}

Oh, Soong Ju ^{[2
]}

Kang, Leeseung ^{[1
]}

Kim, Kyou-Hyun ^{[1
]}

机构：

[1] Korea Inst Ind Technol, Korea Russia Innovat Ctr, Incheon 21655, South Korea

[2] Korea Univ, Dept Mat Sci & Engn, Seoul 02841, South Korea

来源：

METALS | 2023年 / 13卷 / 02期

关键词：

7xxx series aluminum alloy; mechanical properties; microalloying; AGE-HARDENING BEHAVIOR; MICROSTRUCTURAL EVOLUTION; THERMAL-STABILITY; PRECIPITATION; ZR; ADDITIONS; STRENGTH; SEGREGATION; KINETICS; SCANDIUM;

D O I：

10.3390/met13020340

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

We demonstrate via comprehensive microstructural investigation the effects of Sc and Be microalloying on the mechanical properties of Al-Zn-Mg-Cu-based alloys, where Sc microalloying enhances the tensile properties of an Al-9.0Zn-3.0Mg-3.0Cu alloy from 645 MPa (epsilon(f) = similar to 6%) to 672 MPa (epsilon(f) = similar to 8%). In contrast, simultaneous microalloying with Sc and Be reduces the mechanical strength of a synthesized Al alloy to 654 MPa (epsilon(f) = similar to 8%). Comprehensive microstructural investigation revealed that Sc microalloying leads to Al grain refinement, the formation of hardening (MgZn2, Al3M) phases, and an increase in the solid solution of Al. Additional Be microalloying also enhances the formation of MgZn2 phase, while Al3M (M: Zr, Sc) type phases are restrained from forming in Al grains. Furthermore, solid solution in Al grains is reduced by the trace addition of Be microalloying, resulting in an increase in large intermetallic compounds at Al grain boundaries.

引用

页数：9

共 45 条

[1] Structural evolutions of metallic materials processed by severe plastic deformation [J].