Background: Robot-assisted total knee arthroplasty (RA-TKA) has become a popular technology. Studies have investigated the learning curve for surgeons incorporating RA-TKA into practice, but less is known regarding the change in operative efficiency when introducing RA-TKA into a facility. The purpose of this study was to investigate the effects of RA-TKA on operative and turnover time at an orthopaedic specialty hospital.Methods: A total of 148 cases (74 RA-TKA and 74 conventional TKA [C-TKA]) performed by 2 surgeons with previous robotic experience were identified following the introduction of RA-TKA at our facility. Patient demographics, comorbidities, and operative times (ie, wheels-in to incision, incision to closure, closure to wheels-out, and turnover time) were recorded. Cumulative summation analyses were used to investigate learning curves of factors extraneous to surgeon proficiency with RA-TKA.Results: While RA-TKA had a slightly longer set up (3 minutes; range, 12-45), surgical (5 minutes; range, 33-118), and breakdown time (3 minutes; range, 2-7), there was no difference in turnover time between the groups. The learning curve for surgeon A was 6 robotic cases, whereas surgeon B demonstrated no learning curve. There was no identifiable learning curve for turnover time.Conclusion: There was a mean of 8 minutes of increased time required to perform a RA-TKA compared to C-TKA. However, these small increases for the RA-TKA group for set-up, surgical, and breakdown times are not likely to be clinically relevant compared to the C-TKA. It appears that the RA-TKA technology was able to be incorporated into this specialty hospital with minimal changes to surgical efficiency.(c) 2022 Elsevier Inc. All rights reserved.
