Experimental determination of the reversed plastic zone size around fatigue crack using digital image correlation

被引：21
|
作者：
Gonzales, Giancarlo L. Gomez [1 ]
Gonzalez, Julian A. Ortiz [2 ]
Antunes, Fernando V. [3 ]
Neto, Diogo M. [3 ]
Diaz, Francisco A. [1 ]
机构：
[1] Univ Jaen, Dept Ingn Mecan & Min, Jaen, Spain
[2] Univ Autonoma Manizales, Dept Ingn Mecan, Caldas, Colombia
[3] Univ Coimbra, Ctr Mech Engn Mat & Proc CEMMPRE, Dept Mech Engn, Coimbra, Portugal
来源：
THEORETICAL AND APPLIED FRACTURE MECHANICS | 2023年 / 125卷
关键词：
Fatigue crack growth; Reversed plastic zone; Crack tip fields; Cyclic plastic deformation; Plasticity -induced crack closure; STRESS RATIO; PROPAGATION; TIP; CLOSURE; GROWTH; PARAMETER;
D O I：
10.1016/j.tafmec.2023.103901
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper provides an experimental methodology to determine the reversed plastic zone size at the crack tip under cyclic loading through high-resolution DIC measurements. Due to the small size of this region, a 3D-DIC system based on two cameras in a stereoscopic setup with an optical microscope was used in the experimental setup. Fatigue crack growth tests were performed on AISI 1020 steel specimens to evaluate crack tip plasticity. The experimental results obtained with the proposed methodology demonstrate that the reversed plastic zone is a potential parameter to describe the fatigue crack propagation process and related phenomena.
引用
收藏
页数：8
相关论文
共 50 条
  • [41] Experimental Study on Concrete Fracture Process Zone Using Digital Image Correlation Technique
    Li, Shengtao
    Chen, Xudong
    Feng, Lu
    Zhang, Xiangru
    Fan, Xiangqian
    Lu, Jun
    JOURNAL OF TESTING AND EVALUATION, 2021, 49 (02) : 896 - 914
  • [42] Experimental investigation of crack propagation and crack branching in lightly reinforced concrete beams using digital image correlation
    Fayyad, Tahreer M.
    Lees, Janet M.
    ENGINEERING FRACTURE MECHANICS, 2017, 182 : 487 - 505
  • [43] Experimental determination of mechanical properties of aluminium foams using Digital Image Correlation
    Voiconi, Tudor
    Linul, Emanoil
    Marsavina, Liviu
    Kovacik, Jaroslav
    Knec, Marcin
    PROCEEDINGS OF THE 14TH SYMPOSIUM ON EXPERIMENTAL STRESS ANALYSIS AND MATERIALS TESTING, 2014, 601 : 254 - +
  • [44] Simulation of fatigue crack growth by crack tip plastic blunting using cohesive zone elements
    Maziere, Matthieu
    Fedelich, Bernard
    FATIGUE 2010, 2010, 2 (01): : 2055 - 2064
  • [45] Investigation of fatigue cracks using digital image correlation
    Vanlanduit, S.
    Vanherzeele, J.
    Longo, R.
    Guillaume, P.
    EMERGING TECHNOLOGIES IN NON-DESTRUCTIVE TESTING, 2008, : 53 - 58
  • [46] Thermodynamic entropy to detect fatigue crack initiation using digital image correlation, and effect of overload spectrums
    Karimian, Seyed Fouad
    Bruck, Hugh A.
    Modarres, Mohammad
    INTERNATIONAL JOURNAL OF FATIGUE, 2019, 129
  • [47] Propagation measurement for visually thin fatigue crack using homography mapping error and digital image correlation
    Li, Derui
    Cheng, Bin
    Shi, Linze
    Zhang, Enqi
    Zhao, Qibin
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2024, 220
  • [48] Digital Image Correlation parameters optimized for the characterization of fatigue crack growth life
    Sanchez, M.
    Mallor, C.
    Canales, M.
    Calvo, S.
    Nunez, J. L.
    MEASUREMENT, 2021, 174
  • [49] Adaptive Subset-Based Digital Image Correlation for Fatigue Crack Evaluation
    Kang, Myung Soo
    An, Yun-Kyu
    APPLIED SCIENCES-BASEL, 2020, 10 (10):
  • [50] Determination of complex stress intensity factor for a crack in a bimaterial interface using digital image correlation
    Desai, Chaitanya K.
    Basu, Sumit
    Parameswaran, Venkitanarayanan
    OPTICS AND LASERS IN ENGINEERING, 2012, 50 (10) : 1423 - 1430
12345