Experimental determination of the reversed plastic zone size around fatigue crack using digital image correlation

被引：21

作者：

Gonzales, Giancarlo L. Gomez ^{[1
]}

Gonzalez, Julian A. Ortiz ^{[2
]}

Antunes, Fernando V. ^{[3
]}

Neto, Diogo M. ^{[3
]}

Diaz, Francisco A. ^{[1
]}

机构：

[1] Univ Jaen, Dept Ingn Mecan & Min, Jaen, Spain

[2] Univ Autonoma Manizales, Dept Ingn Mecan, Caldas, Colombia

[3] Univ Coimbra, Ctr Mech Engn Mat & Proc CEMMPRE, Dept Mech Engn, Coimbra, Portugal

来源：

THEORETICAL AND APPLIED FRACTURE MECHANICS | 2023年 / 125卷

关键词：

Fatigue crack growth; Reversed plastic zone; Crack tip fields; Cyclic plastic deformation; Plasticity -induced crack closure; STRESS RATIO; PROPAGATION; TIP; CLOSURE; GROWTH; PARAMETER;

D O I：

10.1016/j.tafmec.2023.103901

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper provides an experimental methodology to determine the reversed plastic zone size at the crack tip under cyclic loading through high-resolution DIC measurements. Due to the small size of this region, a 3D-DIC system based on two cameras in a stereoscopic setup with an optical microscope was used in the experimental setup. Fatigue crack growth tests were performed on AISI 1020 steel specimens to evaluate crack tip plasticity. The experimental results obtained with the proposed methodology demonstrate that the reversed plastic zone is a potential parameter to describe the fatigue crack propagation process and related phenomena.

引用

页数：8

共 50 条

[21] Crack Monitoring in Resonance Fatigue Testing of Welded Specimens Using Digital Image Correlation
Friedrich, Nils
Ehlers, Soeren
JOVE-JOURNAL OF VISUALIZED EXPERIMENTS, 2019, (151):
[22] Crack Tip Position Determination Using Infrared Thermography and Digital Image Correlation
Canzar, P.
Tonkovic, Z.
Boras, I.
Svaic, S.
13TH QUANTITATIVE INFRARED THERMOGRAPHY CONFERENCE, 2016, : 854 - 861
[23] Experimental investigation of mixed mode I–II fatigue crack propagation in concrete using a digital image correlation method
Jia, Mengdi
Wu, Zhimin
Yu, Rena C.
Zhang, Xiaoxin
Engineering Fracture Mechanics, 2022, 272
[24] Investigation of the plastic zone around the crack tip in small-scale pure Titanium specimens by means of Thermal Signal Analysis and Digital Image Correlation
Di Carolo, F.
Palumbo, D.
De Finis, R.
Vasco-Olmo, J. M.
Diaz, F. A.
Galietti, U.
49TH ITALIAN ASSOCIATION FOR STRESS ANALYSIS CONFERENCE (AIAS 2020), 2021, 1038
[25] The entering behavior of environmental gases into the plastic zone around fatigue crack tips in titanium
Shimojo, M
Iguchi, R
Myeong, TH
Higo, Y
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1997, 28 (06): : 1341 - 1346
[26] The entering behavior of environmental gases into the plastic zone around fatigue crack tips in titanium
M. Shimojo
T. H. Myeong
Y. Higo
R. Iguchi
Metallurgical and Materials Transactions A, 1997, 28 : 1341 - 1346
[27] Using of Digital Image Correlation Method for Experimental Determination of Modal Parameters
Trebuna, Frantisek
Hunady, Robert
Znamenakova, Martina
PROCEEDINGS OF THE 48TH INTERNATIONAL SCIENTIFIC CONFERENCE ON EXPERIMENTALNI ANALYZA NAPETI 2010 EXPERIMENTAL STRESS ANALYSIS, 2010, : 451 - 458
[28] Development of a Digital Image Correlation controlled fatigue crack propagation experiment
Durif, E.
Fregonese, M.
Rethore, J.
Combescure, A.
ICEM 14: 14TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, VOL 6, 2010, 6
[29] Application of Digital Image Correlation for Estimation of Fatigue Crack Closure Level
Eremin, A.
Sunder, R.
Panin, S.
MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS-2016), 2016, 1785
[30] Experimental and Numerical Study on Plastic Zone Variation ahead of Fatigue Crack Tip
Zhang Wei
Zhou Daoqing
Cai Liang
12TH INTERNATIONAL FATIGUE CONGRESS (FATIGUE 2018), 2018, 165

← 1 2 3 4 5 →