Mathematical Modeling of the Elastic Ring Time-Varying Transmission Path for Planetary Gear Condition Monitoring

被引:0
|
作者
Xue, Song [1 ]
Pan, Chenghui [1 ]
Wang, Congsi [2 ]
Lian, Peiyuan [1 ]
Yan, Yuefei [2 ]
Xu, Qian [3 ]
Wang, Na [3 ]
Li, Ning [4 ]
Wang, Xiaojie [4 ]
Zhao, Wulin [5 ]
Howard, Ian [6 ]
机构
[1] Xidian Univ, Sch Mechanoelect Engn, Xian, Shaanxi, Peoples R China
[2] Xidian Univ, Guangzhou Inst Technol, Guangzhou, Guangdong, Peoples R China
[3] Chinese Acad Sci, XinJiang Astron Observ, Urumqi, Peoples R China
[4] Xian Microelect Technol Inst, Xian, Shaanxi, Peoples R China
[5] 39th Res Inst China Elect Technol Grp Corp, Xian, Shaanxi, Peoples R China
[6] Curtin Univ, Dept Mech Engn, Bentley, WA, Australia
基金
中国国家自然科学基金;
关键词
Planetary gear; Modulation effect; Moving load problem; Window function; Condition monitoring; VIBRATION SIGNAL MODELS; FAULT-DIAGNOSIS; DYNAMIC-MODEL; SIDE-BAND; SET; SIMULATION; FREQUENCY;
D O I
10.1007/s42417-023-01115-z
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
PurposeThe mounted stationary sensor on the ring casing has become a widely accepted way to monitor the planetary gear condition and one challenging aspect of this method is the modulation effect caused by the moving planet gears. It is valuable to study the modulation effect caused by the moving planet gears.MethodDifferent window functions have been proposed to model this modulation phenomenon and there are several drawbacks: the selection of the window function parameters is often arbitrary and subjective instead of basing on the planetary gear physical parameter; the current window function is hard to reflect the impact from the ring gear boundary conditions. Therefore, this paper simulated this modulation phenomenon as moving load dynamic problem to overcome these drawbacks, where the ring casing has been modelled as an axisymmetric flexible structure and the internal meshing forces have been modelled as spatially varying moving loads. Based on the improved hamming window function, this paper related the window function parameters with the planetary gear physical properties and operation conditions and then, quantified the modulation effect with the consideration of moving load speed as well as the ring gear boundary condition.ResultsFor the planetary gear carrier arm rotation speed, the result suggested that the moving speed mainly affect the parameter beta and the corresponding value showed a nonlinear decreasing trend when the moving speed increased. For the ring gear rim thickness, similarly, parameter beta increased significantly with the increase of the rim value. For the radial support stiffness, parameter beta has also been affected most and it shows a decreasing trend when the support stiffness increased. For the sensor location, both parameter alpha and beta shows a periodical change around the ring casing.ConclusionThe results suggested that both parameters have been impacted by the rotation speed and boundary conditions, among which parameter beta has been impacted most.
引用
收藏
页码:4181 / 4207
页数:27
相关论文
共 50 条
  • [1] Mathematical Modeling of the Elastic Ring Time-Varying Transmission Path for Planetary Gear Condition Monitoring
    Song Xue
    Chenghui Pan
    Congsi Wang
    Peiyuan Lian
    Yuefei Yan
    Qian Xu
    Na Wang
    Ning Li
    Xiaojie Wang
    Wulin Zhao
    Ian Howard
    Journal of Vibration Engineering & Technologies, 2024, 12 : 4181 - 4207
  • [2] Mathematical Modeling and Dynamic Analysis of Planetary Gears System with Time-Varying Parameters
    Xiao, Zhengming
    Cao, Jinxin
    Yu, Yinxin
    MATHEMATICAL PROBLEMS IN ENGINEERING, 2020, 2020 (2020)
  • [3] Narrowband demodulation analysis of sun gear faults in consideration of the time-varying transmission path
    Wang Z.
    Guo Y.
    Wang B.
    Zhendong yu Chongji/Journal of Vibration and Shock, 2019, 38 (14): : 63 - 67
  • [4] The Mathematical Model of Curve-Face Gear and Time-Varying Meshing Characteristics of Compound Transmission
    Hu, Yanan
    Lin, Chao
    Li, Shuo
    Yu, Yongquan
    He, Chunjiang
    Cai, Zhiqin
    APPLIED SCIENCES-BASEL, 2021, 11 (18):
  • [5] Modelling of time-varying meshing stiffness under tooth wear condition for nonlinear dynamics in compound planetary gear set
    Yang, Chao
    Zhang, Haibo
    JOURNAL OF VIBROENGINEERING, 2021, 23 (08) : 1800 - 1819
  • [6] Dynamic analysis for a planetary gear with time-varying pressure angles and contact ratios
    Kim, Woohyung
    Lee, Ji Yeong
    Chung, Jintai
    JOURNAL OF SOUND AND VIBRATION, 2012, 331 (04) : 883 - 901
  • [7] The influence of mesh misalignment on planetary gear set with time-varying mesh stiffness
    Ping, S. T.
    Shao, Y. M.
    Wang, L. M.
    Liu, J.
    Li, H. W.
    Xu, J.
    Cheng, Y.
    INTERNATIONAL CONFERENCE ON GEARS 2017/ INTERNATIONAL CONFERENCE ON GEAR PRODUCTION/ INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE PLASTIC GEARS 2017, VOLS 1 AND 2, 2017, 2294 (1-2): : 219 - 230
  • [8] Evaluating the Time-Varying Mesh Stiffness of Planetary Gear Set With Gear Crack Considering the Friction Force Under Mixed Elastohydrodynamic Lubrication Condition
    Wang, Siyu
    Zhu, Rupeng
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2023, 145 (04):
  • [9] Vibration signal modeling of a planetary gear set with transmission path effect analysis
    Liu, Libin
    Liang, Xihui
    Zuo, Ming J.
    MEASUREMENT, 2016, 85 : 20 - 31
  • [10] Natural Frequency of Planetary Transmission with Thin-Walled Ring Gear on Elastic Supports
    李剑英
    胡青春
    柴牧
    彭响方
    JournalofDonghuaUniversity(EnglishEdition), 2017, 34 (03) : 333 - 341