Microstructure and Shear properties of Sn-xZn Transient Liquid Phase Bonding in 3D-Chip Stacking Packaging

被引：2
作者：
Liu, Zheng [1 ]
Wang, Xiang Yu [3 ]
Yang, Li [1 ,2 ]
Sun, Lian Bei [4 ]
Jiao, Xi Xuan [5 ]
Gao, Hui Ming [6 ]
Zhang, Zhi Tao [6 ]
Zhang, Yao Cheng [7 ]
机构：
[1] Guilin Univ Aerosp Technol, Sch Mech Engn, Guilin 541004, Guangxi, Peoples R China
[2] Guangdong Univ Technol, Sch Adv Mfg, Guangzhou 510006, Guangdong, Peoples R China
[3] Guilin Univ Elect Technol, Sch Mech Engn, Guilin 514004, Guangxi, Peoples R China
[4] Changzhou Univ, Sch Mech Engn, Changzhou 213164, Jiangsu, Peoples R China
[5] Guilin Univ Technol, Sch Mech Engn, Guilin 541004, Guangxi, Peoples R China
[6] Natl Dies & Molds Qual Supervis Test Ctr, Xuzhou 215300, Jiangsu, Peoples R China
[7] Changshu Inst Technol, Sch Automat Engn, Suzhou 215500, Jiangsu, Peoples R China
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2023年 / 76卷 / 10期
基金：
中国国家自然科学基金;
关键词：
Composite solder; Transient liquid phase connection; Microstructure; Shear properties;
D O I：
10.1007/s12666-022-02866-1
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The microstructure and shear property of Cu/Sn-xZn/Cu (x = 0, 2, 5, 9, 30, 70 wt.%) composite solder joints fabricated by transient liquid phase (TLP) bonding were investigated. The results showed that the appropriate amount of Zn particles inhibited Cu-6(Sn, Zn)(5) phase formation at the Cu/solder interface. The Zn particles can improve the interface IMC morphology of composite solder joints, the interface IMC thickness of Cu/Sn-30Zn/Cu solder joint is only 3.89 mu m, and the excessive (30-70 wt.%) Zn particles are harmful to the composite solder joints. Doping 2-9 wt.% Zn particles can improve the shear strength. The maximum shear strength value of the Cu/Sn-9Zn/Cu composite solder joint reaches 14.18 MPa. The fracture mechanism is mainly ductile brittle mixed fracture, which occurs near the Interface reaction zone.
引用
收藏
页码：2757 / 2763
页数：7
相关论文
共 45 条
  • [41] Transient liquid phase bonding of IC10 single crystal with GH3039 superalloy using BNi2 interlayer: Microstructure and mechanical properties
    Zhang, L. X.
    Sun, Z.
    Xue, Q.
    Lei, M.
    Tian, X. Y.
    MATERIALS & DESIGN, 2016, 90 : 949 - 957
  • [42] An investigation on microstructure evolution and mechanical properties during transient liquid phase bonding of stainless steel 316L to Ti-6Al-4V
    Zakipour, Shahrokh
    Halvaee, Ayoub
    Amadeh, Ahmad Ali
    Samavatian, Majid
    Khodabandeh, Alireza
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 626 : 269 - 276
  • [43] Microstructure and mechanical properties of Ni3Al-based alloy joint transient liquid phase bonded using Ni/Ti interlayer
    Yang, Z. W.
    Lian, J.
    Cai, X. Q.
    Wang, Y.
    Wang, D. P.
    Liu, Y. C.
    INTERMETALLICS, 2019, 109 : 179 - 188
  • [44] Microstructure and mechanical properties of Ti-48Al-2Cr-2Nb alloy joints produced by transient liquid phase bonding using spark plasma sintering
    Liang, J. M.
    Cao, L.
    Xie, Y. H.
    Zhou, Y.
    Luo, Y. F.
    Mudi, K. Q.
    Gao, H. Y.
    Wang, J.
    MATERIALS CHARACTERIZATION, 2019, 147 : 116 - 126
  • [45] The microstructure and mechanical properties of YT5 cemented carbide/ carbon-carbon composite joints prepared by transient liquid phase diffusion bonding using Ni/Cu/Ti multiple foils as joining materials
    Jie, Wang
    Haotian, Yang
    Penghao, Li
    Fuqi, Zhang
    Qiaomu, Liu
    Qinying, Wang
    VACUUM, 2021, 187
12345