Usability of cellulose-based binder in water-based flexographic ink

被引:3
|
作者
Sonmez, Sinan [1 ,2 ]
Salam, Abdus [1 ]
Fleming, Paul D. [1 ]
Pekarovicova, Alexandra [1 ]
Wu, Qingliu [1 ]
机构
[1] Western Michigan Univ, Coll Engn & Appl Sci, Dept Chem & Paper Engn, Kalamazoo, MI 49008 USA
[2] Marmara Univ, Fac Appl Sci, Dept Printing Technol, Istanbul, Turkey
关键词
FOOD-PACKAGING MATERIALS; PRINTING INKS; MIGRATION; PERFORMANCE; PARAMETERS; SUBSTRATE; GAS;
D O I
10.1111/cote.12643
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
Packaging must have a good commercial appearance and is generally obtained by ink transferred to its substrate. It is important that the ink used in packaging printing is produced from environmentally friendly and sustainable raw materials as well as being suitable for the printing system. The increasing demand in the field of printed packaging and the scarcity of resources to meet this demand have accelerated the search for new sources for inks. For this purpose, inks produced in the laboratory using a modified cellulose-based binder, a commercial acrylic resin and a commercial soybean protein were compared with a commercial ink. As a result of the study, it was determined that the printability properties of the ink obtained by using the modified cellulose-based binder were better than the ink obtained with commercial soybean protein. It was determined that it showed printability properties close to the ink produced with commercial acrylic binders. By using modified cellulose-based water-based flexographic ink instead of other commonly used binders, more environmentally friendly sustainable inks can be produced.
引用
收藏
页码:239 / 247
页数:9
相关论文
共 50 条
  • [1] PHYSICOCHEMICAL TREATMENT OF WATER-BASED FLEXOGRAPHIC INK WASTE
    KIM, HS
    JOUNG, YD
    JOO, DJ
    ENVIRONMENTAL TECHNOLOGY, 1994, 15 (03) : 279 - 285
  • [2] Effects on print quality of varying acrylic binder types in water-based flexographic ink formulations
    Sonmez, Sinan
    Alsaid, Dania
    Pekarovicova, Alexandra
    Fleming, Paul D., III
    Stoops, Matthew T.
    COLORATION TECHNOLOGY, 2023, 139 (03) : 330 - 337
  • [3] Influence of Coalescent on the Gloss of Plastic Water-Based Flexographic Ink
    Gao, Xue
    Sun, Zhiyong
    Ouyang, Yun
    Wang, Xiaofang
    Liu, Xiaoli
    Yang, Li
    Feng, Xiaojuan
    ADVANCED GRAPHIC COMMUNICATIONS AND MEDIA TECHNOLOGIES, 2017, 417 : 941 - 947
  • [4] Research of Wax Additives in the Water-Based Ink for Flexographic Printing
    Ouyang, Yun
    Feng, Weiguang
    Sun, Zhiyong
    Liu, Xiaoli
    Li, Shuangyang
    Zhao, Pengfei
    Lv, Wei
    Gao, Xue
    Zhang, Jingjing
    APPLIED SCIENCES IN GRAPHIC COMMUNICATION AND PACKAGING, 2018, 477 : 737 - 744
  • [5] Study on Performance of Yellow Water-Based Ink for Flexographic Printing
    Liu, Yang
    Huang, Peiqing
    Wei, Xianfu
    Liu, Weidong
    ADVANCED GRAPHIC COMMUNICATIONS, PACKAGING TECHNOLOGY AND MATERIALS, 2016, 369 : 891 - 902
  • [6] Study on the Performance of Adherence of Plastic Water-Based Flexographic Ink
    Wang, Xiaofang
    Li, Jingyang
    Yu, Yanchao
    Wang, Haiqiao
    Gao, Xue
    ADVANCED GRAPHIC COMMUNICATIONS, PACKAGING TECHNOLOGY AND MATERIALS, 2016, 369 : 1019 - 1024
  • [7] Effect of Defoamer on the Performance of Plastic Water-Based Flexographic Ink
    Liu, Xiaoli
    Ouyang, Yun
    Wang, Xiaofang
    Sun, Zhiyong
    Gao, Xue
    Yu, Yanchao
    ADVANCED GRAPHIC COMMUNICATIONS AND MEDIA TECHNOLOGIES, 2017, 417 : 967 - 974
  • [8] Effect of Aminopropyltriethoxysilane on the Adhesion of Flexographic Water-Based Ink to Packaging Films
    Izdebska-Podsiadly, Joanna
    Napiorkowska, Jolanta
    COATINGS, 2023, 13 (11)
  • [9] Study on Anti-friction Performance of Water-Based Flexographic Ink
    Sun Baowei
    Huang Beiqing
    We Xianfu
    RESEARCH ON FOOD PACKAGING TECHNOLOGY, 2014, 469 : 64 - +
  • [10] The Glossiness Influence Factors Analysis of Flexographic Printing Water-based Ink
    Li, Xiaodong
    Zhang, Chuanxiang
    Gong, Xiuduan
    Zhao, Dongbai
    Tang, Wenping
    THIRTEENTH NATIONAL CONFERENCE ON PACKAGING ENGINEERING, TNCPE 13, 2010, : 282 - 285