The comparison between various methods of mandibular reconstruction based on finite element analysis

The Mandible can be damaged by pathological factors, tumors, trauma, infection, and needs a surgical operation for reconstruction and restoring function. There are different methods for the reconstruction of mandible. Based on the surgical approach, primary reconstruction of mandible by reconstruction plate after resection is necessary for maintaining mandibular symmetric and esthetic of the lower third of the face. A finite element model of mandible and masticatory muscles was produced from a normal person (male with 35-year-old). The normal model was resected from the left sixth tooth to the second tooth. The pathological model was reconstructed in different conditions by macro plate. Different conditions were analyzed and compared based on bite force on right fifth tooth, stress developed on screws and macro plate. The finite element analysis results showed that maximum bite force and lower stress on screws were seen in the pathological model (condition 5) when one macro plate and six screws were inserted in the mid-body. The findings showed that the use of two macro plates causes lower stress on it than when we use one. Use of one macro plate and six screws is the best choice in mandibular immobilization which decrease the stress applied on bone and increase the bite force. Because of less stress developed on macro plates and screws, use of two macro plates or one macro plate in mid-body area are also preferred.